Formation of nanoceramic oxide APS coatings on glass with photocatalytic properties

Alicja Duda^1,3, Bartosz Kopyciński^2,3, Łukasz Hawełek¹, Krzysztof Pęcak^1,3, Piotr Tomczyk¹, Grzegorz Muzia¹, Adriana Wrona¹

¹Łukasiewicz Research Network - Institute of Non-Ferrous Metals, 44-100 Gliwice, Poland; ²Łukasiewicz Research Network – Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń, Polska; ³Doctoral School, Silesian University of Technology, 44-100, Gliwice, Poland

Modelling of cold spray using IN718 with a focus on spray spot optimization

Johannes-Christian Schmitt¹, Jochen Fiebig¹, Robert Mücke¹, Olivier Guillon^1,2, Robert Vaßen^1,3

¹Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Jülich, Germany; ²JARA Energy, Jülich Aachen Research Alliance, Jülich, Germany; ³Institut für Werkstoffe, Ruhr University Bochum, Bochum, Germany

Protective Thermal Spray Coatings for TES applications.

Lorena Betancor Cazorla, Camila Barreneche, Adela Svobodova-Sedlackova, Genís Clavé, Sergi Dosta

Universitat de Barcelona, Spain

TEM characterization of degradation processes in dual-phase Ln2Zr2O7+8YSZ TBC systems under oxidation and hot corrosion conditions

Grzegorz Moskal, Hanna Myalska-Głowacka, Amjad Iqbal, Jahangir Khan

Silesian University of Technology, Poland

TiO2 Powder Modification for Low-Pressure Cold Spraying of the Photocatalytic Coatings: solvent influence in sol-gel process

Wioletta Seremak¹, Marek Jasiorski¹, Agnieszka Baszczuk¹, Marcin Winnicki²

¹Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland; ²Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Wroclaw, Poland

Application of image analysis to characterization of TBC systems microstructure

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Coatings on oxide fiber-reinforced ceramic composites (OCMC) for high temperature applications

Ebru Gyoktepeliler Akin, Andreas Killinger

University of Stuttgart, Germany

Data Acquisition During Thermal Coating And Event-Oriented Evaluation

Stephan Zimmermann, Christian Rupprecht, Gerd Paczkowski

CGS Plasmatechnik UG (haftungsbeschränkt), Germany

Deposition of titanium on stainless steel expanded metals using cold gas spraying as an alternative for titanium fleeces in PEM electrolyzers

Tim Sievert¹, Sarah Zerressen², Martin Bram¹, Andreas Glüsen², Olivier Guillon¹, Robert Vaßen¹

¹Forschungszentrum Jülich, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1); ²Forschungszentrum Jülich, Institute of Energy and Climate Research, Electrochemical Process Engineering (IEK-14)

Development of repair methods for single crystal components using thermal spray processes

Maike Letang¹, Aleksander Kostka², Nicolas Karpstein³, Inmaculada López-Galilea², Erdmann Spiecker³, Olivier Guillon^1,4, Robert Vaßen^1,2

¹Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; ²Institute for Materials, Ruhr University Bochum, Germany; ³Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; ⁴JARA Energy, Jülich Aachen Research Alliance, Germany

Effect of adding compressed air into the torches on the microstructure and properties of WC-10Co-4Cr Coatings via a Novel HVOAF Fueled with Ethanol

Shaowu LIU^1,2, hongjian WU³, Zhoukun SHI⁴, Jianhua YAO^1,2, Hanlin LIAO⁴

¹Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, Hangzhou 310023, China; ²College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China; ³Institute of Materials Science, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, 22043 Hamburg, Germany; ⁴ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90010 Belfort, France

Higher manganese silicide powder sintering using tungsten inert gas torch

Nadjet Bouhelal^1,2, Yamina Mebdoua Lahmar¹, Mohammed Lamine Benamar²

¹Center for Development of Advanced Technologies, Algeria; ²Saad Dahleb University, Blida 1 Algeria

Influence of bond coat roughness and substrate composition on thermal shock resistance of APS NiCrAlY/Porous Y-PSZ TBC systems on Cr2O3-forming superalloy

Giulia Pedrizzetti¹, Rita Bottacchiari¹, Lidia Baiamonte¹, Elvira Giubbolini², Erica Scrinzi², Francesco Marra¹, Giovanni Pulci¹

¹Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Ref-erence Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; ²Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy

Influence of high temperature exposure on the architecture of pores and voids in TBC systems

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Low Pressure Plasma Sprayed Tungsten Coatings on First Wall Components for Future Fusion Devices

Gunnar Schmidtmann^1,2, Andrey Litnovsky¹, Jan Willem Coenen¹, Robert Vaßen², Sebastijan Brezinsek¹, Christian Linsmeier¹, Olivier Guillon², Georg Mauer²

¹Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Plasmaphysik (IEK-4), 52425 Jülich, Germany; ²Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Werkstoffsynthese und Herstellungsverfahren (IEK-1), 52425 Jülich, Germany

Microstructure and tribological properties of hybrid feedstock derived arc sprayed Babbitt/WC-CoCr and Babbitt/Mo composite coatings

Ali Eskandari, Mohit Gupta, Shrikant Joshi

University West, Sweden

Near-net-shaping of pure Al 3D part by Cold spraying: manufacturing strategy, deposit properties, and additive growth modeling

Mohamed Sokoré¹, Hongjian Wu², Sihao Deng¹, Hanlin Liao¹, Rija Nirina Raoelison¹

¹Université de Technologie de Belfort-Montbéliard, CNRS, ICB, F-90010 Belfort cedex; ²Helmut Schmidt University / University of the Federal Armed Forces Hamburg

New Diagnostic Results and Investigations of DC Cascaded Multiple Anode Plasma Generators

Stephan Zimmermann¹, Jochen Schein¹, Tim Königstein², Andreas Wank²

¹UniBw München LPT, Germany; ²GTV Verschleißschutz GmbH, Germany

Numerical simulation of plasma thermal spraying with substrate interaction

Riad Horr¹, Mohamed Kezrane¹, Redha Rebhi¹, Sabrina Horr²

¹University of Yahia Fares at Médea, Algeria; ²University of Echahid Hamma Lakhdar at El Oued, Algeria

Process-Microstructure-Property Relationship of Plasma Sprayed Ceramic Thermal Barrier Coatings on Internal Diameters (ID) Surfaces

Maheshwar Rao Bagathi, Robert Vassen, Georg Mauer, Olivier Guillon

Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, IEK-¹Materials Synthesis and Processing, 52425 Jülich, Germany

Residual stress depth distributions in cold gas sprayed metallic coatings - Influence of process parameters

Dhruvit Gabani¹, Zohreh Arabgol², Levke Wiehler², Sören Nielsen², Hongjian Wu², Alexander List², Thomas Klassen², Frank Gärtner², Astrid Pundt¹, Jens Gibmeier¹

¹Karlsruhe Institute of Technology (KIT), Germany; ²Helmut Schmidt University, Hamburg, Germany

Residual Stresses Induced by Alloy 718 Cold Gas Repair Spray of Large Cavities - on the Influence of the Sample Geometry

Florian Lang¹, Johannes-Christian Schmitt², Thilo Pirling³, Robert Vaßen², Jens Gibmeier¹

¹Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Germany; ²Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; ³Institut Laue-Langevin, France

Solution Precursor Plasma Spraying of metal oxides functional coatings

Mathieu Tartarin¹, Simon Goutier¹, Vincent Rat¹, Geoffroy Rivaud¹, Christophe Chazelas¹, Pascal Andre², Alan Kéromnès¹

¹IRCER, UMR CNRS 7315 Université de Limoges, Limoges; ²Laboratoire de Physique de Clermont, UMR CNRS 6533, Université Clermont Auvergne, Clermont-Ferrand

The effect of droplet trajectory on the porous structure of suspension plasma sprayed coatings and a modelling of porosity prediction

Zhoukun SHI¹, Shaowu LIU², Geoffrey DARUT¹, Hanlin LIAO¹, Marie-Pierre PLANCHE¹

¹ICB PMDM UMR 6303, CNRS, Université de Bourgogne Franche-Comté, UTBM, Belfort, France; ²Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, Hangzhou 310023, China

The evaluation of gas turbine real parts condition after service with and without TBC

Mahdi Bozorg Nezhad Nobijari

PARTO, Iran, Islamic Republic of

The influence of laser mictrotexturing on the microstructure and oxidation behavior of free-standing NiCrAlY under high-temperature conditions

Tomasz Kielczawa¹, Pawel Sokolowski¹, Hanna Myalska-Glowacka², Grzegorz Moskal²

¹Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland; ²Faculty of Materials Science, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice, Poland

Thermal spraying of sol-gel materials

Anna Gibas, Wioletta Seremak

Sol-Gel Materials Research Group, Wroclaw University of Science and Technology, Wroclaw, Poland

Antiviral coatings for elements of sanitary fittings

Adriana Wrona¹, Alicja Hryniszyn¹, Jacek Mazur¹, Kinga Czechowska¹, Klaudia Pepłowska¹, Anna Czech¹, Małgorzata Osadnik¹, Krzysztof Pęca¹, Olgierd Jeremiasz², Bartłomiej Pawłowski², Radosław Pawłowsk²

¹Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland; ²Helioenergia sp. z o.o., Czerwionka-Leszczyny, Poland

Adhesion of Thermal Barrier Coatings: influence of the bond coat application technique

Carlos Roberto Camello Lima¹, Victor Crespo², Jaume Nin³, Genis Clavé⁴, Sergi Dosta⁴

¹Mackenzie Presbyterian University, Brazil; ²Cromomed SA, Spain; ³TMComas; ⁴University of Barcelona