Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
Session Overview
Date: Tuesday, 19/Jun/2018
8:00am
-
9:00am
Registration & Welcome Coffee
9:00am
-
9:10am
Welcome & Introduction
Location: Auditorium
9:10am
-
10:10am
Keynote : Prof. Wolfgang Nejdl, L3s Research Center & Dr. Dominik Rohrmus, Labs Network Industrie 4.0 e.V.
Location: Auditorium
10:10am
-
10:25am
Coffee Break
10:25am
-
11:25am
TM1.1: Logistics & Cyber-Physical Production Systems
Location: Seminar room 1a
Chair: Viktor Just, University of Paderborn
 
10:25am - 10:45am

Intelligent workpiece carrier for distributed data collection and control in manufacturing environments

Walter Gasparetto1, Georg Egger1, Andrea Giusti1, Erwin Rauch2, Michael Riedl1, Dominik T. Matt1,2

1: Fraunhofer IEC, Italy; 2: Free University of Bolzano, Italy


10:45am - 11:05am

Intelligent control of an assembly station by integration of a digital twin for employees into the decentralized control system

Iris Graessler, Alexander Poehler

Heinz Nixdorf Institute, Germany


11:05am - 11:25am

Optimization Model to Extend Existing Production Planning and Control Systems for the Use of Additive Manufacturing Technologies in the Industrial Production

Wjatscheslav Baumung1, Vladislav V. Fomin2

1: Reutlingen University, Germany; 2: Vytautas Magnus University, Lithuania

TM2.1: Enabling Technologies
Location: Seminar room 1b
Chair: Thilo Grove
 
10:25am - 10:45am

Enhancing Expert Knowledge Based Cause-Effect Networks Using Continuous Production Data

Daniel Rippel1, Michael Lütjen1, Michael Freitag1,2

1: BIBA – Bremer Institut für Produktion und Logistik GmbH at the University of Bremen, Hochschulring 20, 28359 Bremen, Germany; 2: University of Bremen, Faculty of Production Engineering, Bibliothekstraße 1, 28359 Bremen, Germany


10:45am - 11:05am

Feature model for the specification of industrial indoor location-based services (I²LBS)

Tommy Falkowski, Christoph Jürgenhake, Harald Anacker, Roman Dumitrescu

Fraunhofer Institute for Mechatronic Systems Design IEM


11:05am - 11:25am

Tools 4.0 – Intelligence starts on the cutting edge

Walther Maier, Hans-Christian Möhring, Kim Torben Werkle

University of Stuttgart, Germany

11:25am
-
11:40am
Coffee Break
11:40am
-
12:40pm
TM1.2: Logistics & Cyber-Physical Production Systems
Location: Seminar room 1a
Chair: Viktor Just, University of Paderborn
 
11:40am - 12:00pm

Communication Concept of DeConSim: a Decentralized Control Simulator for Production Systems

Rosario Davide D'Amico1, Georg Egger1, Andrea Giusti1, Erwin Rauch2, Michael Riedl1, Dominik Matt1,2

1: Fraunhofer Italia Research, Via A. Volta 13 A, 39100 Bolzano (BZ), Italy; 2: Free University of Bozen-Bolzano, Piazza Università, 1, 39100 Bolzano (BZ), Italy


12:00pm - 12:20pm

Application Scenarios of Artificial Intelligence in Electric Drives Production

Andreas Mayr, Michael Weigelt, Michael Masuch, Moritz Meiners, Franziska Hüttel, Jörg Franke

Friedrich-Alexander University Erlangen-Nuremberg, Germany


12:20pm - 12:40pm

Self-describing connected components for live information access within production systems

David Barton, Philipp Gönnheimer, Jürgen Fleischer

Karlsruhe Institute of Technology, Germany

TM2.2: Enabling Technologies
Location: Seminar room 1b
Chair: Thilo Grove
 
11:40am - 12:00pm

Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study

Andreas Deuter1, Andreas Otte1, Marcel Ebert1, Frank Possel-Dölken2

1: OWL University of Applied Sciences, Germany; 2: PHOENIX CONTACT GmbH & Co. KG, Germany


12:00pm - 12:20pm

Material-Integrated Intelligent Systems: Update on the State of the Art

Dirk Lehmhus, Stefan Bosse

University of Bremen, Germany


12:20pm - 12:40pm

Semantic Information Models for Industry 4.0

Sören Auer

Technische Informationsbibliothek, Germany

12:40pm
-
3:00pm
Lunch Break and Technology Demonstrations in the IFW-Laboratory
3:00pm
-
3:40pm
TA3.1: Systems Engineering & Enabling Technology
Location: Seminar room 1a
Chair: Dirk Lehmhus, Fraunhofer IFAM
 
3:00pm - 3:20pm

Model-Based Systems Engineering for Machine Tools and Production Systems (Model-Based Production Engineering)

Karl Kübler, Stefan Scheifele, Christian Scheifele, Oliver Riedel

University of Stuttgart, Germany


3:20pm - 3:40pm

A Unified System Modelling and Programming Language based on JavaScript and a Semantic Type System

Stefan Bosse

University of Koblenz-Landau, Germany

TA4.1: Industry Session
Location: Seminar room 1b
 

Software statt Geräte-Maschinenüberwachung skalierbar aus der Cloud

Jan Brinkhaus

Ceratizit Hannover GmbH, Germany


Retrofitting: Anbindung alter Maschinen an das Produktionsleitsystem

Sören Adam

Rehm Dichtungen Ehlers GmbH, Germany

3:40pm
-
4:00pm
Coffee Break
4:00pm
-
5:00pm
TA3.2: Systems Engineering & Enabling Technology
Location: Seminar room 1a
Chair: Dirk Lehmhus, Fraunhofer IFAM
 
4:00pm - 4:20pm

Enabling Data Analytics in Large Scale Manufacturing

Achim Kampker1, Heiner Hans Heimes1, Ulrich Tobias Bührer1, Christoph Lienemann1, Stefan Krotil2

1: Chair of Production Engineering of E-mobility Components (PEM) of RWTH Aachen University, Campus Boulevard 30, 52074 Aachen, Germany; 2: BMW Group, Knorrstraße 147, 80788 Munich, Germany


4:20pm - 4:40pm

Digital Twin Farm of Manufacturing Processes and Mechanical Parts

Andreas Burblies1, Matthias Busse2

1: Fraunhofer-Allianz Simulation, Bremen, Germany; 2: Fraunhofer-Institut Fertigungstechnik und angwandte Materialforschung, IFAM, Bremen, Germany


4:40pm - 5:00pm

Influence of strain on miniaturized flexible sensor for on-line monitoring of CFRP production

Martina Hübner1, Daniel Gräbner1, Aynur Özdemir1, Walter Lang1,2

1: Institute for Microsensors, -actuators and- systems (IMSAS), University Bremen, Germany; 2: Microsystems Center Bremen (MCB), Bremen, Germany

TA4.2: Industry Session
Location: Seminar room 1b
 

Fabrik der Zukuft der Sennheiser-Weg zur i4.0

Axel Schmidt

Engineering Sennheiser electronic GmbH & Co KG, Germany


Digitales Assistenzsystem für die Schaltschrank-Montage

Axel Schulz

SCHUBS GmbH, Germany


Wie Digitalisierung den Mittelstand verändern kann

Philipp Becker

Vision Lasertechnik für Forschung und Industrie GmbH, Germany

5:00pm End of Sessions
5:45pm Leaving for Conference Dinner
Date: Wednesday, 20/Jun/2018
8:00am
-
9:00am
Registration & Welcome Coffee
9:00am
-
10:00am
Welcome & Keynote Session : Prof. Paolo Ermanni, ETH Zürich & Marc Vathauer, MSF-Vathauer Antriebstechnik GmbH
Location: Auditorium
10:00am
-
10:40am
WM5.1: Systems Engineering
Location: Seminar room 1a
Chair: Michael Hesse, University of Paderborn, Heinz Nixdorf Institute
 
10:00am - 10:20am

Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers

Jens Holtkötter1, Jan Michael1, Christian Henke1, Ansgar Trächtler1, Marcos Bockholt2, Andreas Möhlenkamp2, Michael Katter2

1: Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM, Zukunftsmeile 1, 33102 Paderborn, Germany; 2: Miele & Cie KG, Carl-Miele-Str. 29, 33332 Gütersloh, Germany


10:20am - 10:40am

Framework for the agile development of innovative Product-Service-Systems for existing physical rehabilitation systems

Laban Asmar, Martin Rabe, Arno Kühn, Roman Dumitrescu

Fraunhofer IEM, Germany

WM6.1: Enabling Technologies
Location: Seminar room 1b
Chair: Marc-André Dittrich, IFW
 
10:00am - 10:20am

Improving cluster-based methods for usage anticipation by the application of data transformations

Andres Auquilla1,2, Yannick De Bock1, Joost Duflou1

1: KU Leuven, Belgium; 2: University of Cuenca, Ecuador


10:20am - 10:40am

Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool

Eckart Uhlmann1,2, Rodrigo Pastl Pontes1, Claudio Geisert1, Eckhard Hohwieler1

1: Fraunhofer Institute for Production Systems and Design Technology - IPK; 2: Technische Universität Berlin – Institute for Machine Tools and Factory Management - IWF

10:40am
-
11:00am
Coffee Break
11:00am
-
12:20pm
WM5.2: Systems Engineering
Location: Seminar room 1a
Chair: Michael Hesse, University of Paderborn, Heinz Nixdorf Institute
 
11:00am - 11:20am

Using Transitive Relations for Automatic Creation of Consistent Traceability in Model-based Systems Engineering

Atakan Sünnetcioglu1, Rainer Stark1,2

1: Fraunhofer IPK, Germany; 2: TU Berlin, Germany


11:20am - 11:40am

Configuration based process and knowledge management by structuring the software landscape of global operating industrial enterprises with Microservices

Eike Schäffer, Hannes Leibinger, Axel Stamm, Matthias Brossog, Jörg Franke

Friedrich-Alexander-University of Erlangen-Nuremberg, Germany


11:40am - 12:00pm

Specification Technique for Virtual Testbeds in Space Robotics

Ruslan Bernijazov, Michael Hillebrand, Christian Bremer, Lydia Kaiser, Roman Dumitrescu

Fraunhofer IEM, Germany


12:00pm - 12:20pm

Systematic Development of Smart Factory using CONSENS

Cheng Yee Low

Universiti Tun Hussein Onn Malaysia, Malaysia

WM6.2: Enabling Technologies
Location: Seminar room 1b
Chair: Marc-André Dittrich, IFW
 
11:00am - 11:20am

Use of RFID tags for monitoring resin flow and investigation of their influence on the mechanical properties of the composite

Elisabeth Maria Hardi1, Marius Veigt2, Michael Koerdt1, Axel S. Herrmann1, Michael Freitag2,3

1: Faserinstitut Bremen e.V., Germany; 2: BIBA – Bremer Institut für Produktion und Logistik GmbH, Germany; 3: Universität Bremen, Fachbereich Produktionstechnik, Germany


11:20am - 11:40am

Curing Transponder – Integrating RFID transponder into glass fiber-reinforced composites to monitor the curing of the component

Marius Veigt1, Hardi Elisabeth2, Koerdt Michael2, Herrmann Axel S.2,3, Freitag Michael1,3

1: BIBA - Bremer Institut für Produktion und Logistik GmbH, Germany; 2: Faserinstitut Bremen e. V; 3: Faculty of Production Engineering, University of Bremen


11:40am - 12:00pm

Development of a Handling System with integrated Sensors for Textile Preforms using Additive Manufacturing

Michael Brink1, Jan-Hendrik Ohlendorf1,3, Klaus-Dieter Thoben1,2

1: University of Bremen, Institut of Integrated Product Development (BIK), Bremen, Germany; 2: University of Bremen, BIBA – Bremer Institut für Produktion und Logistik GmbH, Bremen, Germany; 3: University of Bremen, MAPEX - Center for Materials and Processes, 28359 Bremen, Germany


12:00pm - 12:20pm

Testing Lora for food applications - Example application for airflow measurements inside cooled warehouses with apples

Reiner Jedermann1, Mykhailo Borysov1, Nico Hartgenbusch1, Sylvo Jaeger2, Marc Sellwig3, Walter Lang1,4

1: University Bremen, Institute for Microsensors, -Actuators and -Systems, Otto Hahn Allee 1, 28359 Bremen, Germany; 2: Microsensys GmbH, In der Hochstedter Ecke 2, 99098 Erfurt, Germany; 3: Competence Center for Fruit Growing - Lake Constance (KOB), Schumacherhof 6, 88213 Ravensburg, Germany; 4: Microsystems Center Bremen, Otto Hahn Allee 1, 28359 Bremen, Germany

12:20pm
-
1:00pm
Lunch
1:00pm
-
2:10pm
WN7: Poster Session
Location: Spine
 

A case study for a unified designation of development information in a PDM System for Technical Inheritance

Wieben Scheidel, Iryna Mozgova

Leibniz Universität Hannover, Germany


Thermal analysis of perforated pin-fins heat sink under forced convection condition

Alhassan Salami Tijani

Universiti Teknologi MARA ,, Malaysia


Integrating sensors in castings made of aluminum – new approaches for direct sensor integration in gravity die casting

Rico Tiedemann1, Martin Fischer2, Matthias Busse2,3, Walter Lang1

1: Institute for Microsensors, Actuators and Systems (IMSAS), University of Bremen, Microsystems Center Bremen, Bremen, Germany; 2: Research Group Near-net-shaping Production Technologies, Faculty of Production Engineering, University of Bremen; 3: Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Bremen, Germany


Scenario-based Manufacturing Data Analytics with the Example of Order Tracing through BLE-Beacons

Sebastian Groggert, Hannes Elser, Quoc Hao Ngo, Robert H. Schmitt

Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen, Germany


Generating Correct, Compact, and Efficient PLC Code from Scenario-based Assume-Guarantee Specifications

Daniel Gritzner, Joel Greenyer

Leibniz Universität Hannover, Fachgebiet Software Engineering, Germany


Process-parallel center deviation measurement of a BTA deep-hole drilling tool

Sebastian Kaiser1, Berend Denkena1, Benjamin Bergmann1, Dieter Bolle2, Markus Mücke1

1: Institute of Production Engineering and Machine Tools (IFW), Leibniz Universität Hannover, Germany; 2: BTA Tiefbohrsysteme GmbH, Achim, Germany


Challenges and Opportunities of RFID Sensortags Integration by Fibre-Reinforced Plastic Components Production

Michael Brink1,5, Frank Berkemeyer2, Jan-Hendrik Ohlendorf1,4, Gerrit Dumstorff2,4, Klaus-Dieter Thoben1,3,5, Walter Lang1

1: University of Bremen, Faculty of Production Engineering, BIK - Institute for Integrated Product Development, 28359 Bremen, Germany; 2: University of Bremen, Faculty of Electrical Engineering, IMSAS - Institute for Microsensors, -actuators and -systems, 28359 Bremen, Germany; 3: BIBA - Bremer Institut für Produktion und Logistik GmbH, 28359 Bremen, Germany; 4: University of Bremen, MAPEX - Center for Materials and Processes, 28359 Bremen, Germany; 5: ForWind - Center for Wind Energy Research of the Universities of Oldenburg, Hannover and Bremen, 26129 Oldenburg, Germany


A multi-physics simulation approach for energy and cost analysis during the deceleration of high-speed trains

David Meinel, Tallal Javied, Sebastian Rast, Christian Zipp, Jörg Franke

FAPS Institute, Friedrich-Alexander University of Erlangen-Nuremberg, Germany


Hybrid Spindle – An approach for a milling machine tool spindle with extended working range for HSC and HPC

Berend Denkena1, Bernd Ponick2, Benjamin Bergmann1, Markus Mücke1, Jan Königsberg2

1: Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW)), An der Universität 2, 30823 Garbsen, Germany; 2: Leibniz Universität Hannover, Institute for Drive Systems and Power Electronics (IAL), Welfengarten 1, 30167 Hannover, Germany


Concept for the Implementation of a Scaling Strategy into the Paradigm of Technical Inheritance

Philipp Wolniak, Iryna Mozgova, Roland Lachmayer

Institut für Produktentwicklung und Gerätebau (Institute of Product Development), Leibniz Universität Hannover


Energy consumption analysis of modules for CPS retrofitting

Michael Rehe, Berend Denkena, Christian Wagener

Institute of Production Engineering and Machine Tools, Germany

2:10pm
-
3:50pm
WA8: Robotics & Enabling Technologies
Location: Seminar room 1a
Chair: Dominik Brouwer
 

Comparison of EEG Data Classification between Conventional Visual Cue-Marker and EMG-Based Marker on Brain Activity

Khairunnisa Johar1, Noor Ayuni Che Zakaria1, Muhammad Azmi Ayub1, Cheng Yee Low2, Fazah Akhtar Hanapiah3,4

1: Faculty of Mechanical Engineering, UNIVERSITI TEKNOLOGI MARA Selangor, Malaysia; 2: Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia; 3: Faculty of Medicine, UNIVERSITI TEKNOLOGI MARA Selangor, Malaysia; 4: Institute of Pathology, Forensic and Laboratory Medicine (I-PPerForM), Universiti Teknologi MARA Selangor, 47000 Sungai Buloh, Malaysia


Smart Human-Robot-Collaboration in Mechanical Joining Processes

Jens Meißner1, Frederik Schmatz1, Florian Beuß1, Jan Sender1, Wilko Flügge2, Eugen Gorr3

1: Fraunhofer Research Institution for Large Structures in Production Engineering IGP, Germany; 2: University of Rostock, Faculty of Mechanical Engineering and Marine Technology, Chair of Manufacturing Engineering, Germany; 3: Airbus Operations GmbH, Germany


Concept And Design Of A Spherical Joint Mechanism For Service Robots

Tim Fröhlich1, Ulrich Reiser1, Felix Meßmer1, Alexander Verl2

1: Unity Robotics, Germany; 2: Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen, Universität Stuttgart


Low power sensor node with photovoltaic power supply for radio-based process monitoring

Christoph von der Ahe1, Bernard Lüers2, Ludger Overmeyer1, Bernd Geck2, Tobias Fürtjes3

1: Institute of Transport and Automation Technology, Leibniz Universität Hannover, Germany; 2: bInstitute of Microwave and Wireless Systems, Leibniz Universität Hannover, Germany; 3: MARPOSS Monitoring Solutions GmbH, Germany


A Reinforcement Learning Strategy for the Swing-Up of the Double Pendulum on a Cart

Michael Hesse, Julia Timmermann, Eyke Hüllermeier, Ansgar Trächtler

Universität Paderborn, Heinz-Nixdorf-Institut, Germany

WA9: Structural Health Monitoring & Sensors
Location: Seminar room 1b
Chair: Jens Holtkötter, Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM
 

Wireless Online Impact Source Localization on a Composite

Sarah Aguasvivas Manzano, Dana Hughes, Nikolaus Correll

University of Colorado Boulder, United States of America


Mobile Automated Diagnostics of Stress State and Residual Life Prediction for a Component under Intensive Random Dynamic Loads

Iryna Mozgova1, Ihor Yanchevskyi2, Mykola Gerasymenko3, Roland Lachmayer1

1: Leibniz Universität Hannover, Germany; 2: National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Ukraine; 3: Kharkiv National University of Radioelectronics, Ukraine


Evaluation of an energy self-sufficient sensor for monitoring marine gearboxes

Tobias Schneider1, Thomas Kruse2, Benjamin Küster1, Malte Stonis1, Ludger Overmeyer1

1: IPH Hannover gGmbH, Germany; 2: REINTJES GmbH, Germany


Simultaneous Measurement of Strain and Temperature with two Resistive Strain Gauges made from Different Materials

Daniel Gräbner1, Gerrit Dumstorff1, Walter Lang1,2

1: University of Bremen, Institute for Microsensors, -actuators and - systems, Germany; 2: Microsystems Center Bremen, Germany


Investigation on the influence of material interfaces and impedance changes on the propagation of guided waves in laminated steel layers

Liv Rittmeier1, Tobias Losch2, Michael Sinapius1, Rolf Lammering2

1: Technische Universität Braunschweig, Germany; 2: Helmut Schmidt Universität, Germany

3:50pm End of Day / Goodbye

 
Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: SysInt 2018
Conference Software - ConfTool Pro 2.6.119
© 2001 - 2018 by Dr. H. Weinreich, Hamburg, Germany