Conference Agenda

Design of Falling Film Evaporator for High Temperature Heat Pump System Using Low GWP Refrigerant

Gilbong Lee, Bongsu Choi, Youngbok Lee, Junhyun Cho, Bong Seong Oh, Kibong Kim, Ki-chang Chang

Korea Institute of Energy Research, Korea, Republic of (South Korea)

Modal decomposition techniques for 2-D measurements of wave/turbulence flows

Olav Rømcke¹, Priyanka Gautam¹, Malte Loft², Simen Ellingsen¹

1: Norwegian University of Science and Technology (NTNU), Norway; 2: Hamburg University of Technology (TUHH), Germany

Numerical-Computational Modeling of Flow-Accelerated Corrosion Phenomena with the Multilevel Approach

Pedro Henrique Augusto Mota¹, João Marcelo Vedovotto², Aristeu da Silveira Neto³, Millena Martins Villar⁴

1: Universidade Federal de Uberlândia, Brazil; 2: Universidade Federal de Uberlândia, Brazil; 3: Universidade Federal de Uberlândia, Brazil; 4: Universidade Federal de Uberlândia, Brazil

VOF-DPM Simulations of Bubble Rise in Bi- and Poly-dispersed Liquid-Solid Suspensions

Sohela Manna, Vivek V. Buwa, Prantik Das

Indian Institute of Technology, Delhi, India

Effect of electric field on droplet formation in a co-flow microchannel

wang dongbao^1,2, Panagiota Angeli¹

1: University College London, United Kingdom; 2: Jiangsu University, China

Two-Phase flow pattern detection through an innovative machine learning strategy

Sauro Filippeschi, Jacopo Mazzini

Università di Pisa, Italy

Inferring deposition rate in a two-phase flow from particle movement using physics-informed neural networks with floating sensors

Mehrdad Mesgarpour^1,2, Mostafa Safdari Shadloo^3,4, Ananta Kumar Nayak³, Amiritpal singh³, Stephen Manova², Somchai Wongwises²

1: School of Business, Society and Engineering, Mälardalens University, Universitetsplan 1, 722 20, Västerås, Sweden; 2: King Mongkut’s University of Technology Thonburi (KMUTT), Bangmod, Bangkok, Thailand; 3: INSA Rouen Normandie, Univ Rouen Normandie, CNRS, Normandie Univ, CORIA UMR 6614, F-76000 Rouen, France; 4: Institut Universitaire de France, Rue Descartes, F-75231 Paris, France

Theoretical and numerical analysis of weakly compressible liquid-vapor flows in velocity equilibrium

Solène Schropff, Eric Daniel, Fabien Petitpas

Aix Marseille Univ, CNRS, IUSTI, Marseille, France

Effect of viscosity and surface tension on bubble swarm dynamics

Vladislav Shirokov^1,2, Pavlina Basarova¹, Sandra Orvalho²

1: University of Chemistry and Technology, Prague, Czech Republic; 2: Institute of Chemical Process Fundamentals of the Czech Academy of Sciences, Prague, Czech Republic

Experimental investigation of radial bubble size distributions in foam columns

Leon Knüpfer¹, Robin Götzelt¹, Kerstin Eckert^1,2, Sascha Heitkam^1,2

1: TU Dresden, Germany; 2: Helmholtz-Zentrum Dresden-Rossendorf, Germany

Analysis of the effect of surface tension using Structured Planar Laser-Induced fluorescence on flow at low speed in a rectangular duct.

David Hann, Ahmed Abou Sherif, Kathy Joihnson

University of Nottingham, United Kingdom

Initial experimental investigation of transparent two-phase loop thermosyphon cooling system

Valentin Scheiff¹, Konstantinos Kyprianidis¹, Rebei Bel Fdhila²

1: Mälardalens Universitet, Sweden; 2: Hitachi Energy Research

EXPERIMENTAL INVESTIGATION OF FLOW STRUCTURE AND CAVITATION EVOLUTION OF SUBMERGED WATERJET

Guangxin Ding¹, Ning Mao², Jianbin Hu³, Yubo Jin¹, Can Kang², Hyoung-bum Kim¹

1: School of Mechanical and Aerospace Engineering, Gyeongsang National University, Korea, Republic of (South Korea); 2: School of Energy and Power Engineering,Jiangsu University, China; 3: National Research Center of Pumps,Jiangsu University, China

A Study on Computational Cost and Accuracy for Bubble Modeling in the air-coal particle two-phase flow in a Slag-Fuming Furnace: Comparing S-Gamma and Discrete Models

Mehrdad Mesgarpour^1,2, Magnus Ek³, Andreas Lennartsson⁴, Konstantinos G. Kyprianidis¹, Somchai Wongwises², Rebei Bel Fdhila^1,5

1: School of Business, Society and Engineering, Mälardalens University, Universitetsplan 1, 722 20, Västerås, Sweden; 2: Fluid Mechanics, Thermal Engineering and Multiphase Flow Research Lab. (FUTURE), Department of Mechanical Engineering, King Mongkut’s University of Technology Thonburi (KMUTT), Bangmod, Bangkok 10140, Thailand; 3: Manager R&D strategic projects, Boliden Smelters, 932 81 Skelleftehamn, Sweden; 4: Division of Minerals and Metallurgical Engineering, Luleå University of Technology, 971 87 Luleå, Sweden; 5: Hitachi Energy Research, Forskargränd 7, 72178 Västerås, Sweden

Investigation of the Influence of a Film Injection Slot on Thin Shear-Driven Films using Direct Numerical Simulation

Eric Nied¹, Jonas H. Rüsch², Markus Schatz², Bernhard Weigand¹, Leander Düntsch¹

1: University of Stuttgart, Institute of Aerospace Thermodynamics, Germany; 2: Helmut Schmidt University, University of the Federal Armed Forces Hamburg, Professorship Fluid Machinery for Energy Technology, Germany

Numerical Simulation on Phase Transition Characteristics of High-speed Impinging Supercooled Droplets

Haotian Chen, Sheng Xu, Bing Wang

School of Aerospace Engineering, Tsinghua University, Beijing, China

Estimation of high-resolution spatial distribution of airborne sea salt flux using numerical fluid dynamics and machine learning

Hitoshi Suto, Kota Fujiwara, Yasuo Hattori, Naoto Kihara, Keisuke Nakao

Central Research Institute of Electric Power Industry, Japan

EXPERIMENTAL INVESTIGATION OF WATER FLOW PATTERNS IN HORIZONTAL AND SLIGHTLY TILTED LARGE DIAMETER TUBE

Israel AGUILERA-CORTES^1,2, Adrien TOUTANT^1,2, Samuel MER^1,2

1: Laboratoire PROcédés, Matériaux et Energie Solaire (PROMES-CNRS), Tecnosud, Rambla de la Thermodynamique – 66100 Perpignan; 2: Université de Perpignan Via Domitia (UPVD), 52 Avenue Paul Alduy – 66100 Perpignan

Experimental Study of the Particle-Impact Erosion in Steam Generation Facilities Using a Submerged Impinging Jet Tester

Oluyele Adekanye, Marcio Bezerra Machado, Carlos Henao, Kevin Hodder, R. Sean Sanders

Pipeline Transport Processes Group, Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB, Canada

Experimental study on air-water swirling flows: bubble dynamics and swirling decay

Jaebeen Lee, Hyungmin Park

Seoul National University, Korea, Republic of (South Korea)

Effect of the force and torque models on the dynamics of ellipsoidal inertial particles in a turbulent wall-bounded flow

Antoine Michel, Boris Arcen

Université de Lorraine, CNRS, LEMTA, F-54000 Nancy, France

Experimental investigation of convective steam condensation in small diameter tubes

Camille Dedion¹, Sébastien Renaudière de Vaux², Baptiste Grosjean², Marc Miscevic¹, Pascal Lavieille¹, Frédéric Topin³

1: LAPLACE, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: CEA Cadarache, IRESNE/DER/SESI; 3: IUSTI, Aix-Marseille University, Marseille, France

Behavior of rigid sphere and nearby soft wall induced by pulsed laser

Yasuhiro Sugimoto

Kanazawa Institute of Technology, Japan

Wavenumber-frequency spectrum of wall pressure fluctuations in bubbly channel flow

Mingjin Wen, Yunqiao Liu, Benlong Wang, Hao Zhang

Shanghai Jiao Tong University, People's Republic of China

Numerical investigation of refrigerant vapor-lubrication oil two-phase flow in a scroll compressor

Dongsheng Zhang¹, Jiahua Hong², Jian Huang², Xiaoxi He²

1: Shanghai Nuclear Engineering Research&Design Institute Co. Ltd, China, People's Republic of; 2: GMCC Co. Ltd., Foshan, Guangdang, P. R. China

Mechanisms of cell detachment induced by bullet-shaped bubble in microchannel

Shoto Sekiguchi¹, Kazuya U. Kobayashi², Hiroaki Kusuno³, Yuta Kurashina¹, Kei Morikawa⁴, Yoshiyuki Tagawa¹

1: Tokyo University of Agriculture and Technology; 2: Nippon Institute of Technology; 3: Kansai University; 4: St. Marianna University School of Medicine

Effect of front and side confinement on a vertical heated plate with two-phase cooling.

Jean Daoud, Nicolas Baudin, Stéphane Roux, Jérôme Bellettre

LTEN/ Nantes Université, France

Three-dimensional measurement of liquid phase flow field induced by deformable single-bubble chain

Jinho Oh, Hyunduk Seo, Kyung Chun Kim

Pusan National University, Korea, Republic of (South Korea)

Influence of Thermophysical Properties of Heated Surface on Boiling Heat Transfer with Cryogenic Fluid

Masaharu Kubota^1,2, Yuki Sakamoto³, Junnosuke Okajima¹

1: Institute of Fluid Science, Tohoku University, Japan; 2: Graduate School of Engineering, Tohoku University, Japan; 3: Japan Aerospace Exploration Agency, Japan

Experimental Study on Boiling Characteristics in 3D Porous Media Using 100μm Copper Foam

Sangmin Song¹, Yun Seok Choi¹, Hyun Jin Yong¹, Il Woong Park¹, Hyun Sun Park²

1: Inha University, Korea, Republic of (South Korea); 2: Seoul National University, Korea, Republic of (South Korea)

Verification of an interface capturing model for two-phase flow with phase change and its application to flow boiling

Jakub Cranmer¹, Giovanni Giustini¹, Alex Skillen¹, Ryan Tunstall²

1: University of Manchester, United Kingdom; 2: Rolls-Royce, Derby, United Kingdom

Bubble Dynamics during the Hydrogen Production of an Alkaline Water Electrolysis

Deendarlianto Deendarlianto¹, Iskandar Ali Mubarok², Robertus D.D. Putra³, Chan Siew Hwa⁴

1: Universitas Gadjah Mada, Indonesia; 2: Universitas Gadjah Mada, Indonesia; 3: Universitas Gadjah Mada, Indonesia; 4: Nanyang Technological University, Sinagpore

Phase Field Modeling of Liquid Ammonia Spray

Paolo Guida, William L. Roberts

King Abdullah University of Science and Technology, Saudi Arabia

Numerical Simulation of chugging condensation

Chang Sun, Qian Hong, Dongsheng Zhang, Bo Yang

Shanghai Nuclear Engineering Research&Design Institute Co. Ltd, China, People's Republic of

The challenge of closure model selection: A machine-learning approach

Susann Hänsch, Fabian Schlegel, Ronald Lehnigk

Helmholtz-Zentrum Dresden-Rossendorf, Germany

Comparison of two-phase flow distribution according to the installation orientation of an annular distribution header

Jaedeok Ko¹, Ji Hwan Jeong²

1: Pusan National University, Korea, Republic of (South Korea); 2: Pusan National University, Korea, Republic of (South Korea)

A consistent workflow for CFD simulations of gassed stirred tanks

Mazen Draw¹, Chris Greenshields², Susann Hänsch¹, Benjamin Krull¹, Ronald Lehnigk¹, Dirk Lucas¹, Richard Meller¹, Fabian Schlegel¹

1: Helmholtz-Zentrum Dresden-Rossendorf, Germany; 2: CFD Direct Ltd, UK

Multiphase Flow modelling through restrictions using morphology-adaptive Euler-Euler approach

Michele Cristina Pedroso^1,2, Josiane Weise², Richard Meller³, Fabian Schlegel³, Rafael Franklin Lázaro Cerqueira², Emilio Ernesto Palladino²

1: Petroleo Brasileiro SA, Brazil; 2: Federal University of Santa Catarina; 3: Helmholtz-Zentrum Dresden-Rossendorf

Eulerian simulation of bubbly and fast fluidization using a new EMMS drag model

Alireza Behzadi, Mohit Tandon

Siemens Industries Software, United Kingdom

Large-Eddy-Simulation of two phase flows with heat transfer: A comparison of reinitialization equations for passive scalar transport

Damien Fouquet, Julien Carmona, Vincent Moureau

CORIA, CNRS, Normandie Univ, UNIROUEN, INSA Rouen, 76000 Rouen, France

PARTICLE IMAGE VELOCIMETRY ANALYSIS OF STRATIFIED LIQUID-LIQUID FLOW IN SEMI-CIRCULAR MICROCHANNEL

Muhammad Ridzuan Bin Khamaron¹, Nathalie Di Miceli Raimondi¹, Laurent Prat¹, Anne Lélias², Emmanuel Cid¹

1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: CEA Marcoule, Bagnols/Cèze, France

Evaporation From a free Water Surface in the absence of wind

Sudhakar Subudhi, Adarsh Saini

IIT Roorkee, India

Shear Effects on Catastrophic Phase Inversion and Effective Viscosity in Oil/Water Emulsion Flow

Natan Augusto Vieira Bulgarelli¹, William Monte Verde¹, Marcelo Souza de Castro^1,2

1: Center for Energy and Petroleum Studies (CEPETRO), Universidade Estadual de Campinas (UNICAMP), Brazil; 2: School of Mechanical Engineering, Universidade Estadual de Campinas, Brazil

DESIGN CHARACTERISTIC OF A LOOP-TYPE HEAT PIPE WITH SODIUM

Hyewon Kim¹, Hyeonmin Choi¹, Byung Ha Park², Hyungmo Kim¹

1: Gyeongsang National University, Korea, Republic of (South Korea); 2: Korea Atomic Energy Research Institute, Korea, Republic of (South Korea)

Numerical simulation of a two-phase thermosyphon loop with the neptune_cfd code - Application to passive safety systems.

Ethan Rollier^1,2, Nicolas Mérigoux¹, Thomas Prusek¹, Catherine Colin²

1: EDF R&D, MFEE, Chatou, France; 2: IMFT, Universite de Toulouse, CNRS, INPT, UPS, France

Study of Ice Basal Melting under the Influence of Thermohaline Double Diffusive Convection

Rongfu Guo¹, Yantao Yang^1,2

1: State Key Laboratory for Turbulence and Complex Systems, Department of Mechanics and Engineering Science, College of Engineering, Peking University, Beijing, P. R. China; 2: Laoshan Laboratory, Shandong, P. R. China

Suspension culture technology using Vibration Induced Circulating Flow

Tatsuki Kagiya, Shuya Kinoshita, Hiromichi Obara

Tokyo Metropolitan University, Japan

Simple Estimation of Water Mass Entrainment by Water Exit of a sphere using Two Directional Photography

Kotaro Takamure¹, Tomomi Uchiyama², Tomohiro Degawa²

1: Akita University, Japan; 2: Nagoya University, Japan

NUMERICAL MODELING OF HEAT & MASS TRANSFERS IN STEFAN-TYPE FLOWS USING A SHARP INTERFACE TWO-FLUID FORMULATION

Louis Libat, Vincent Le Chenadec, Can Selçuk, Eric Chénier

Gustave Eiffel University, Multiscale Modelling and Simulation Laboratory, Champs-sur-Marne, France

Non-Newtonian two-phase flow in rectangular microchannel with different surface wettability

Yuki Yamahata, Hiroshi Suyama, Yuma Fukuchi, Qian Zhao, Yukihiro Yonemoto, Akimaro Kawahara

Kumamoto univeresity, Japan

Estimation of Emulsion Volume Fraction using Ultrasonic Inline Rheometer

Wenqing Zheng¹, Kohei Ohie², Yuji Tasaka², yuichi Murai²

1: Graduate School of Engineering, Hokkaido University, Japan; 2: Faculty of Engineering, Hokkaido University, Japan

Comparative Analysis of Advection Schemes in Direct Numerical Simulations Using Algebraic VOF

Armita Karimi¹, Maike Baltussen², Kay Buist³, Hans Kuipers⁴

1: TU/e, Netherlands; 2: TU/e, Netherlands; 3: TU/e, Netherlands; 4: TU/e, Netherlands

Sloshing instability induced by a bubble flow

Marc Cordelle Vacher^1,2,3, Tullio Traverso³, Stéphane Perrard², Christophe Josserand¹, Sophie Ramananarivo¹

1: CNRS - Ecole polytechnique, France; 2: Université PSL, ESPCI, Physique et Mécanique des Milieux Hétérogène; 3: Saint-Gobain, Saint-Gobain Recherche Paris

Breakage & coalescence of surfactant-laden drops

Alessio Roccon^1,2, Giovanni Soligo³, Alfredo Soldati^1,2

1: University of Udine, Italy; 2: Institute of Fluid Mechanics and Heat Transfer, TU-Wien, Vienna, Austria; 3: Complex Fluids and Flows Unit, OIST, 904-0495 Okinawa, Japan

Simulation of Multiphase Ligament Dynamics using VOF and Taylor Analogy Modeling at Low Reynolds Numbers

Muhd Jamil Al Hakim Bin Mohd Rodzi, Andrzej F. Nowakowski

University of Sheffield, United Kingdom

MICROSCALE CFD SIMULATION TO INVESTIGATE TRANSPORT PHENOMENA IN MULTIPHASE PACKED-BED CATALYTIC REACTORS

Diego Fida, Giuseppe Pipitone, Alice De Matteis, Antonio Buffo, Gianluca Boccardo, Daniele Marchisio, Samir Bensaid

Politecnico di Torino, DISAT, Institute of Chemical Engineering, Torino, Italy

Direct Numerical Simulation assisted Large Eddy Simulation of emulsions

Githin Tom Zachariah¹, Harry E. A. Van den Akker^1,2

1: SFI Research Centre for Pharmaceuticals (SSPC), University of Limerick, Limerick, V94T9PX, Ireland; 2: Bernal Institute, University of Limerick, V94TP9X, Ireland

Numerical characterization of a confined evaporating liquid jet in crossflow

Maxence SIOR, Davide ZUZIO, Jean-Mathieu SENONER, Jean-Luc ESTIVALEZES, Olivier ROUZAUD

ONERA, France

Numerical modelling of a single Direct Reduced Iron particle smelting in a slag.

Jean Robin^1,2, Cesar Pairetti², Edouard Izard¹, Aliyeh Rafiei³, Stéphane Zaleski²

1: ArcelorMittal Maizières Research; 2: Sorbonne Université, Institut Jean Le Rond d’Alembert; 3: ArcelorMittal Global R&D Hamilton

Numerical simulation of nucleate boiling hydrogen bubble

Alessandro Novi, Antonio Cantiani, Samuel Ahizi, Jorge Pinho, Miguel Alfonso Mendez

Von Karman Institute for Fluid Dynamics, Belgium

INFLUENCE OF FRICTIONAL STRESS MODELS ON HYDRODYNAMICS OF 2D GAS-SOLID TAPERED FLUIDIZED BED

Lipak Kumar Sahoo¹, Sabita Sarkar²

1: Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore - 575025, India; 2: Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai - 600036, India

Effect of Liquid Flow Rate on Liquid Film Behavior and Local Heat Transfer Coefficient in Shear-driven Liquid Film Flow

Tomoki Hirokawa, Takuya Nakano, Osamu Kawanami

University of Hyogo, Japan

The Behavior of Thin Rectangular Particles Falling in Quiescent Air

Jongwon Lee, Juhan Bae, Wontae Hwang

Seoul National University, Korea, Republic of (South Korea)

Direct numerical simulations of nucleate boiling on unstructured meshes

Henri Lam¹, Savinien Pertant², Giovanni Ghigliotti^1,3, Manuel Bernard¹, Guillaume Balarac¹

1: University of Grenoble Alpes, CNRS, Grenoble-INP, Grenoble, 38041, France; 2: Université Rennes, CNRS, IPR (Institut de Physique de Rennes)–UMR 6251; 3: Massachusetts Institute of Technology, Department of Nuclear Science & Engineering, Cambridge, MA, U.S.

CFD Simulation of Multi-Point Absorber Wave Energy Converter

Shivam Gupta, Sumana Ghosh

IIT Roorkee, India

Effect of poly-dispersed bubbles on the skin frictional drag in horizontal turbulent bubbly channel flows

Koyo Sasaki¹, Yoshihiko Oishi¹, Hyun Jin Park², Yuji Tasaka², Yuichi Murai²

1: Muroran Institute of Technology, Japan; 2: Hokkaido University, Japan

Development of a Liquid Level Indicator Using a Distributed Fiber Optic Sensor by Heat transfer characteristics

hyewon lim¹, HeeHak Ahn², Hyungmo Kim¹

1: Gyeongsang National University, Korea, Republic of (South Korea); 2: R&D Center, Samhong Machinery Co.,Ltd, Korea, Republic of (South Korea)

Influence of wettability on the growth of gas bubbles on a solid surface

Mengyuan Huang^1,2, Ming Xu¹, Yifan Han², Xuegeng Yang¹, Kerstin Eckert^1,2, Gerd Mutschke²

1: Technical University of Dresden, Germany; 2: Helmholtz-Zentrum Dresden-Rossendorf

Unresolved Euler-Lagrange simulations of non-spherical particles with liquid injection

Nicola Vanzetto¹, Niels Deen^1,2, Yali Tang^1,2

1: Power and Flow group, Department of Mechanical Engineering, Eindhoven University of Technology, The Netherlands.; 2: Eindhoven Institute for Renewable Energy System, Eindhoven University of Technology, the Netherlands

Establishing Jet Loop Reactors as Scalable Bioelectrochemical Reactor Systems for Anodic and Cathodic Production Processes

Selma Iraqi Houssaini¹, Lukas Kneuer², Prof. Dr.-Ing. Michael Schlüter¹, Prof. Dr.-Ing Johannes Gescher²

1: Hamburg University of Technology, Germany, Institute of Multiphase Flows; 2: Hamburg University of Technology, Germany, Institute of Technical Microbiology

Rebound of a quasi-2D cylinder on a solid wall in clear water and in a suspension of particles

Alicia Aguilar-Corona¹, Micheline Abbas², Matthieu J. Mercier³, Laurent Lacaze³

1: Facultad de Ingenieria Mecanica, Universidad Michoacana de San Nicolas de Hidalgo,CP 58030, Morelia, Michoacan, Mexico; 2: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, France; 3: Institut de Mécanique des Fluides de Toulouse, Université de Toulouse, CNRS, France

Effect of bulk nanobubbles on the dynamics of laser-induced cavitation

Mingbo Li¹, Yuhan Li¹, Yawen Gao², Benlong Wang¹, Chao Sun²

1: Shanghai Jiao Tong University, China, People's Republic of; 2: Tsinghua University, China, People's Republic of

PHENOMENOLOGICAL MODELING OF TWO-PHASE GAS-LIQUID FLOW IN 180º CURVED PIPELINES WITH RECTANGULAR CROSS-SECTION

Ariel Jordan¹, Valdir Estevam^1,2, Marcelo Souza de Castro^1,2

1: School of Mechanical Engineering - Universidade Estadual de Campinas – UNICAMP, Campinas-Sao Paulo, Brazil; 2: Center for Energy and Petroleum Studies - CEPETRO – Universidade Estadual de Campinas – UNICAMP, Campinas-Sao Paulo, Brazil

Development of second-moment models for clustered particle-laden flows based on interface-resolved simulation data

Yan Xia, Zhaosheng Yu

Zhejiang University, China, People's Republic of

Numerical Study on the Influence of Microstructures on Mass Transfer in Liquid Films

Sangitha Muthulingam¹, Felix Febrian¹, Henning Bonart², Christian Kahle³, Georg Brösigke¹, Jens-Uwe Repke¹

1: Technische Universität Berlin, Germany; 2: Technische Universität Darmstadt; 3: University of Koblenz

Optimizing Pneumatically Agitated Bioreactors Using CFD: Bridging Pilot- and Industrial-Scale Gas Fermentation

Carolin Bokelmann, Ralf Takors

University of Stuttgart, Germany

Mathematical Modelling of nonlinear acoustic properties for multiple bubbles coated by visco-elastic shell and liquid

Ryoki Kawahata¹, Tetsuya Kanagawa²

1: Graduate School of Science and Technology, University of Tsukuba,Japan; 2: Institute of Systems and Information Engineering, University of Tsukuba, Japan

FLOW CHARACTERISATION DURING VASCULAR ACCESS IN AN ARTERIOVENOUS FISTULA

Tejaswi Josyula, Lisa Prahl Wittberg

FLOW, Department of Engineering Mechanics, KTH Stockholm, Sweden

IDENTIFICATION OF TWO-PHASE FLOW PATTERNS IN MICROTUBES USING IMAGE ANALYSIS AND MACHINE LEARNING TECHNIQUES

Jacqueline Biancon Copetti¹, Jeferson Diehl De Oliveira², Jean Schmith¹, Lucas Souza Dias¹, Elaine Maria Cardoso³

1: Universidade do Vale do Rio dos Sinos - Unisinos, Brazil; 2: University of São Paulo - USP, Polytechnic School, SISEA, Brazil; 3: São Paulo State University - UNESP, Brazil

Numerical study on focused ultrasound in bubbly liquid: medical application of ultrasound and microbubbles

Takeru Hasegawa, Naoto Mitsume, Tetsuya Kanagawa

University of Tsukuba, Japan

Flow Dynamics of Aqueous Two-Phase Systems in Millifluidic Channels

Joseph Abhisheka Rao Boravelli, Anil B Vir

Indian Institute of Technology Tirupati, India

Effect on particles by bubble-induced flow

Yutian He¹, Varghese Mathai¹, Patel Kuntal²

1: UMASS, amherst, United States of America; 2: MAX PLANCK INSTITUTE FOR SOLAR SYSTEM RESEARCH, gottingen, germany

Visualization and image-based measurement of two-dimensional flowing foam

Shimpei Saito¹, Yuki Mizushima², Soumei Baba¹, Naoki Takada¹

1: National Institute of Advanced Industrial Science and Technology (AIST), Japan; 2: Shizuoka University, Japan

The influence of surfactants on the critical velocity of head-to-head bubble collision

Quan Liu, Xiaoping Guan, Ning Yang

Institute of Process Engineering, Chinese Academy of Sciences, China, People's Republic of

Particle-laden gravity currents: lock-release slumping regime at the laboratory scale

Yvan Dossmann¹, Cyril Gadal², Jean Schneider¹, Cyrille Bonamy³, Julien Chauchat³, Sébastien Kiesgen de Richter¹, Matthieu Mercier², Florence Naaim-Bouvet⁴, Marie Rastello³, Laurent Lacaze²

1: Université de Lorraine, LEMTA, France; 2: Université de Toulouse, CNRS, INPT, IMFT, Toulouse, France; 3: Univ. Grenoble Alpes, CNRS, Grenoble INP, LEGI, Grenoble, France; 4: Univ. Grenoble Alpes, INRAE, CNRS, IRD, Grenoble INP, IGE, Grenoble, France

Experiments in curved ducts with two-phase flow (water-air) explain the operational issues of surging and gas locking in Electrical Submersible Pump (ESP) systems

Benjamim Anderson César Pitra¹, Valdir Estevam^1,2, Marcelo Souza de Castro^1,2

1: School of Mechanical Engineering - FEM - Universidade Estadual de Campinas – UNICAMP, Campinas - Sao Paulo, Brazil; 2: Center for Energy and Petroleum Studies - CEPETRO – Universidade Estadual de Campinas – UNICAMP, Campinas - Sao Paulo, Brazil

Modelling of Biomass Pyrolysis in Fluidized Bed for Bioenergy Generation

Abderraouf Adjizi¹, Amine Chadil¹, Isabelle Navizet¹, Enrica Masi², Ali Ozel³, Jamal Chaouki⁴

1: CNRS, Univ Gustave Eiffel, Univ Paris-Est Créteil, UMR 8208, MSME, Marne-La-Vallée, 77454, France; 2: Institut de Mécanique des Fluides de Toulouse (IMFT), Université de Toulouse, CNRS, Toulouse, France; 3: School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom; 4: Department of Chemical Engineering, Polytechnique Montreal, PO Box 6079, Succ. Centre-ville, Montreal, QC, H3C 3A7, Canada

A Three-Dimensional Impulse Criterion for The Sediment Particle Entrainment

Yicong Zhu, Ping Wang

Key Laboratory of Mechanics on Disaster and Environment in Western China, The Ministry of Education of China, Department of Mechanics, Lanzhou University, China, People's Republic of

Temperature imaging of fluid flows using lifetime-based laser-induced phosphorescence of particles

Gauthier Rousseau¹, Nathan Pellerin¹, Mart Giesbergen¹, Hessel Adelerhof¹, Bastien Carde¹, Benoit Fond², Sergey Borisov³, Koen Blanckaert¹, Marianne Pons¹

1: Institute of Hydraulic Engineering and Water Resources Management, TU Wien, Karlsplatz 13, 1040 Vienna, Austria; 2: ONERA, The French Aerospace Lab, Department of Aerodynamics, Aeroelasticity and Aeroacoustics (DAAA), Paris-Saclay University; 3: Institute of Analytical Chemistry and Food Chemistry, Graz University of Technology,Stremayrgasse 9, 8010 Graz, Austria

Improved laser-produced aerosol scavenging via pre-injection of charged water mist: an experimental investigation

Ruicong Xu^1,2, Avadhesh Sharma³, Hugo Laffolley⁴, Shuichiro Miwa^1,2, Shunichi Suzuki^1,5

1: Department of Nuclear Engineering and Management, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan; 2: Nuclear Professional School, The University of Tokyo, 2-22 Shirane-shirakata, Tokai-mura, Ibaraki, 319- 1188, Japan; 3: School of Mechanical Engineering (SMEC), Vellore Institute of Technology, Chennai, Tamil Nadu, 600127, India; 4: Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki, 319-1184, Japan; 5: Institute of Engineering Innovation, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan

Flow boiling and condensation experiment in a wide range of gravity conditions aboard China’s Space Station

Wang-Fang DU^1,3, Xiao ZHAO¹, Fa-Long HE², Kai LI^1,3, Jian-Fu ZHAO^1,3

1: Institute of Mechanics, Chinese Academy of Science, China; 2: Tianjin Chengjian University, China; 3: University of the Chinese Academy of Sciences, China

Enhancing Self-Jumping of Condensate Droplets on Micro/Nanostructured Surfaces

Soumei Baba, Shimpei Saito, Naoki Takada

National Institute of Advanced Industrial Science and Technology (AIST), Japan

Thermal-electrical simulation of Li-ion battery embedded in phase change material

Gabriel Murbach, Gabriel Bertacco dos Santos, Elaine Maria Cardoso, Edemar Morsch Filho

São Paulo State University

Particle-Resolved Direct Numerical Simulations of catalytic flows: dry reforming of methane

Abdelhamid HAKKOUM¹, Amine CHADIL¹, Céline LEONARD¹, Jamal CHAOUKI²

1: CNRS, Univ Gustave Eiffel, Univ Paris-Est Créteil, UMR 8208, MSME, Marne-La-Vallée, 77454, France; 2: Process Engineering Advanced Research Lab (PEARL), Chemical Engineering Department, Polytechnique Montreal, P.O. Box 6079, Station Centre-Ville, Montreal, Quebec, H3C 3A7, Canada

In-line tracking of coating layer formation in fluidized bed spray granulation with impedance spectroscopy

Maike Orth¹, Maximilian Becker², Anupam Kumar³, Matthias Kuhl³, Thorsten A. Kern², Stefan Heinrich¹, Shaik Asif¹, Dennis Kähler²

1: Hamburg University of Technology, Institute of Solids Process Engineering and Particle Technology, Germany; 2: Hamburg University of Technology, Institute for Mechatronics in Mechanics, Germany; 3: University of Freiburg, Department of Microsystems Engineering, Germany

Coalescence of oil droplets induced by Kelvin force in a paramagnetic aqueous carrier phase

Xueyong Lu¹, Kilian Ortmann¹, Kerstin Eckert^1,2, Zhe Lei^1,2

1: Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Dresden, Germany; 2: Technische Universität Dresden, Institute of Process Engineering and Environmental Technology, Dresden, Germany

A modified KTGF model for wet particle fluidization

Qiushi Xu, Ning Yang

Institute of Process Engineering，Chinese Academy of Sciences, China, People's Republic of

Droplet Impact on Drone Propeller

Mohd Rafe Ali, Kiran Raj M

INDIAN INSTITUTE OF TECNOLOGY MADRAS, India

Computational Modeling of Multi-Phase Flows for Fluid-Structure Interaction

Gabriel Sabino Oliveira, Pedro Henrique Augusto Mota, João Marcelo Vedovotto, Millena Martins Villar

Federal University of Uberlandia, Brazil

An overlapping dynamic mesh method to modeling acoustic wave-particule interactions

Ronan PLIQUE, Joël DUPAYS, Julien LABAUNE, Philippe GRENARD

DMPE, Onera, Université Paris-Saclay, 91120, Palaiseau, France

Impact of droplets on single pillared superhydrophobic surface

MAN MOHAN SINGH PATEL, PARMOD KUMAR

Indian Institute of Technology, mandi, India

Modeling premixed methane/air combustion from micro to macro scale for fluidized bed applications

Ivan Girault^1,2, Enrica Masi¹, Amine Chadil²

1: IMFT, France; 2: MSME, France

Experiments of hydrogen combustion in a fluidized bed

Lucas Sanchez, Vincent Baruzzini, François Roch Mendy, Enrica Masi, Thierry Schuller, Rudy Bazile

IMFT, France

Development of measurement method for gas-solid-liquid three-phase annular flow in a high-speed air-lift pump using ultrasonic pulse echography

Ren Yamamoto¹, Hyun Jin Park¹, Yuji Tasaka¹, Yuichi Murai¹, Satoru Takano², Kazuya Shimizu², Sotaro Masanobu²

1: Hokkaido University, Japan; 2: National Maritime Research Institute

Investigating the dynamics of finite-size spheroids in homogeneous turbulence

Markus Uhlmann¹, Manuel Moriche², Manuel Garcia-Villalba²

1: KIT, Germany; 2: TU Wien, Austria

Exploring the impact of operating parameters on hydrodynamics and oxygen mass transfer in a downflow bubble column: an experimental investigation

Adib ESSID, Jean pierre FONTAINE, Alina-Violeta URSU, Christophe VIAL

Université Clermont Auvergne, CNRS, Clermont Auvergne INP, Institut Pascal

Effects of Pipe Diameter on the Initiation Mechanism and Flow Development of Horizontal Air-Water Slug Flow

Akmal Irfan Majid^1,2, Yusnanda Agus Nusirwan¹, Okto Dinaryanto⁴, Arif Widyatama^1,2, Yosephus Ardean Kurnianto Prayitno^2,3, Indarto Indarto^1,2, Deendarlianto Deendarlianto^1,2

1: Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Indonesia; 2: Center for Energy Studies, Universitas Gadjah Mada, Indonesia; 3: Department of Mechanical Engineering, Vocational School, Universitas Gadjah Mada, Indonesia; 4: Department of Mechanical Engineering, Institut Teknologi Dirgantara Adisucipto, Yogyakarta-Indonesia

Void Fraction monitoring in Gas-liquid Two-phase flow by electrical impedance tomography (EIT) combined with machine learning

Fuyang Yang¹, Prima Asmara Sejati^1,2, Miwa Shuichiro³, Takei Masahiro¹

1: Chiba University, Japan; 2: Universitas Gadjah Mada,Indonesia; 3: Tokyo University, Japan

Flow boiling heat transfer of alternative refrigerant to R410A in a horizontal tube

Young Soo Chang, Amal Vasu

Kookmin University, Korea, Republic of (South Korea)

Effect of rotor parameters on the production of model w/o emulsions: Experiments and simulations with the Lattice Boltzmann Method

Lucas de Araujo Almeida^1,2, Rayane Reinholz Boone Corona², Ramon Silva Martins^1,2, Humberto Belich Junior¹, Rogério Ramos²

1: Multiphysics Modeling Laboratories (MM Labs), Universidade Federal do Espírito Santo (Ufes), Vitória, Brazil; 2: Research Group for Oil and Gas Flow and Measurement (NEMOG), Universidade Federal do Espírito Santo (Ufes), Vitória, Brazil

An experimental analysis of the effect of dissolved gas on pool boiling

Francois Clemens¹, Marco Marengo², Nicolas Miché¹, Marco Bernagozzi¹, Bhaskar Chakraborty¹, Joel De Coninck¹, Mirko Gallo³, Anastasios Georgoulas¹

1: University of Brighton, United Kingdom; 2: University of Pavia, Italy; 3: Sapienza University of Rome

Flow characteristics of film flow discharged from rectangular nozzle

Shigeo Hosokawa, Motoki Ohara, Miu Yoshioka

Kansai University, Japan

Pool Boiling heat transfer on structured surfaces for immersion cooling applications

Chiara Falsetti

TU Delft, Netherlands, The

Entropy-stable and low-dissipative numerical method for compressible two-phase flow at all Mach numbers

Jueun Cho, Jae Yoon Yoon, Dokyun Kim

Hongik University, Korea, Republic of (South Korea)

Weber dependency of jet fragmentation: a Direct Numerical Simulation investigation

Romain Vallon^1,2, Malek Abid¹, Fabien Anselmet¹

1: Aix Marseille University, CNRS, Centrale Méditerranée, IRPHE, Marseilles, France; 2: École Centrale de Lyon, CNRS, INSA Lyon, Université Claude Bernard Lyon 1, LMFA, Écully, France

Highly reduced modeling of bubble dynamics based on temporal scale separation

Kazuki Maeda, Emin Saridede

School of Aeronautics and Astronautics, Purdue University

Effects on gas-liquid flows of the enhanced stability of bubbles in liquid mixtures

Thomas Gouëzec

TotalEnergies, France

Effect of bubble size on the stability of flowing liquid films in binary oil mixtures

Ange Combrouze

SIMM - ESPCI Paris, France

Behavior and Effects of Self-Excited Sweeping Water Jet in Air and Water Media and Its Interaction with Soft Materials

Fernando Kevin Miranda, Michal Zelenak, Zdenek Riha

Fluid Jets Department, UGN, Czech Academy of Sciences, Czech Republic

Experimental study of flow regimes in a partially-filled horizontally rotating cylinder.

Hélène SCOLAN, Benjamin Pattedoie, Laurent Martin Witkowski, Jean-Louis Marié, Jean-Philippe Matas

Laboratoire de Mécanique des Fluides et d'Acoustique (LMFA) UMR5509 / CNRS - UCB Lyon 1 - Centrale Lyon - INSA Lyon, France

Enhancement of Heat Transfer in Subcooled Flow Boiling with EDM-Modified Surfaces Using 3M™ Novec™ HFE-7100 Dielectric Liquid

Marcos Conde-Fontenla, Concepción Paz, Adrián Cabarcos, Miguel Concheiro

University of Vigo, Spain

Application of the Lucas-Kanade Optical Flow Method for Void Fraction Estimation in Subcooled Flow Boiling

Adrián Cabarcos, Concepción Paz, Marcos Conde-Fontenla, Miguel Concheiro

Universidade de Vigo, Spain

CFD Modeling of Hydrodynamics for Hydrogen Production in a Fluidized Bed Reactor of the Cu-Cl Cycle

Vishal Dhakane, Ashutosh Yadav

IIT Jammu, India

Numerical Simulation of Single Bubble Growth during Depressurization

Kazuma Tani^1,3, Seiya Tanaka², Takehiro Himeno³

1: MQue Inc.; 2: Doshisha University; 3: The University of Tokyo

Comparative Assessment on Gas Hydrate Agglomeration Under Flow at Different Scales

Leandro S. Valim^1,2, Luiz H. M. Lino¹, Adriana Teixeira², Adrieli A. Souza², Amadeu K. Sum³, Rigoberto E. M. Morales⁴, Moisés A. M. Neto⁴, Celina C. Kakitani⁴, Laécio M. Júnior⁴, Annie F. Dufour⁵, Nicolas Lesage⁵, Erick Serris¹, Jean-Michel Henri¹, Gianluca Lavalle¹, Ana Cameirão¹

1: École des Mines de Saint-Étienne, France; 2: Petrobras, Brazil; 3: Colorado School of Mines, USA; 4: UTFPR, Brazil; 5: TotalEnergies, France