Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
Preliminary Program for iCAT 2016
Session
QM: Quality Assurance for Additive Manufacturing
Time:
Tuesday, 29/Nov/2016:
1:45pm - 3:25pm

Session Chair: Olaf Diegel
Location: Room 2

Show help for 'Increase or decrease the abstract text size'
Presentations

Surface and dimensional measurements of additive manufactured workpieces

Martin Heinl1,2, Bogdan Galovskyi1,2, Tino Hausotte1,2

1Institute of Manufacturing Metrology (FMT), Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany; 2CRC Collaborative Research Center 814 - Additive Manufacturing, 91052 Erlangen, Germany


Selective laser melting of TiAl powder: Optical diagnostics

Igor Smurov1, Maria Doubenskaya1, Alexey Domashenkov1, Pavel Petrovskiy2

1University of Lyon, ENISE, LTDS, CNRS UMR5513, 42023, Saint-Etienne, France; 2Nation University od Science & Technology (MISIS), 119049, Moscow, Russia


Multimodal in-situ monitoring and defect detection for laser metal deposition by using infrared thermography and sheet-of-light imaging

Ulf Hassler1, Tobias Grulich1, Lars Seifert1, Günther Kostka1, Oliver Hentschel2, Michael Schmidt2

1Development Center for X-ray Technology (EZRT), Fraunhofer Institute for Integrated Circuits (IIS), Fuerth, Germany; 2Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Konrad-Zuse-Straße 3-5, 91052 Erlangen, Germany


Tasks for in-line quality control and in-situ optimisation of Additive Manufacturing Powder Bed Fusion Processes (Professional)

Simina Fulga1,2, Arjana Davidescu2, Ira Effenberger1, Alexander Verl3

1Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Germany; 2Politehnica University Timisoara, Romania; 3Institute for Control Engineering of Machine Tools and Manufacturing Systems, Germany


In-line quality control system for a reliable Additive Manufacturing -layer by layer inspection-

Simina Fulga1,2, Arjana Davidescu2, Ira Effenberger1, Alexander Verl3

1Department Machine Vision and Signal Processing, Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Stuttgart, Germany; 2Mechatronics Department, Politehnica University Timisoara, Timisoara, Romania; 3Institute for Control Engineering of Machine Tools and Manufacturing Systems, Stuttgart, Germany



 
Contact and Legal Notice · Contact Address:
Conference: iCAT 2016
Conference Software - ConfTool Pro 2.6.112
© 2001 - 2017 by H. Weinreich, Hamburg, Germany