Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Date: Sunday, 28/Mar/2021
3:00pm
-
7:30pm
Welcome of Participants / Check-in
Location: Desk (Hôtel Hélios)
6:30pm
-
7:30pm
Welcome cocktail / Wine and Cheese party
7:30pm
-
8:30pm
Dinner
8:30pm
-
9:15pm
Symposium Opening and Opening Addresses
Location: conference room
Chair: Yves Wouters, Université Grenoble Alpes, France
Chair: Bruce Pint, ORNL, United States of America
9:15pm
-
9:55pm
Opening Conference (Invited Plenary)
Location: conference room
Chair: Bruce Pint, ORNL, United States of America
Chair: Yves Wouters, Université Grenoble Alpes, France
 

Compound Degradation: Stress Assisted Corrosion and Stress-Corrosion Cracking in Nickel Based Alloys at 550-600C

John Rayment Nicholls

Cranfield University, United Kingdom

9:55pm
-
10:30pm
Poster Hanging
Location: Espace Posters1
Posters from sessions A+E+J to be put in place
Date: Monday, 29/Mar/2021
7:30am
-
8:30am
Poster Hanging
Location: Espace Posters1
Posters from sessions B+C+D to be put in place
8:30am
-
10:10am
Session 1: Fundamentals of High Temperature Reactions
Location: conference room
Chair: Brian Gleeson, University of Pittsburgh, United States of America
Chair: Fabien Rouillard, CEA, France
 

High-Temperature Oxidation Behavior of Alumina-forming Austenitic Alloys

Shigenari Hayashi, Haruki Utsumi

Hokkaido University, Japan



Elucidation of competitive oxidation/sulfidation reactions on binary ferritic alloys

Christiane Stephan-Scherb1,2, Florian Falk1,3, Juho Lehmusto4, Oded Sobol1, Bruce Pint5

1: Bundesanstalt für Materialforschung und -prüfung, Germany; 2: Freie Universität Berlin, Germany; 3: Technische Universität Berlin, Germany; 4: Abo Akademi University, Finland; 5: Oak Ridge National Laboratory, U.S.

10:10am
-
10:30am
Coffee break
10:30am
-
11:30am
Session 3': Advanced characterization techniques
Location: conference room
Chair: Philippe Marcus, Chimie ParisTech-CNRS, France
Chair: Antony Fry, National Physical Laboratory, United Kingdom
 

High temperature oxidation of bare or pre-oxidized cladding material in SFP-LOCA conditions examined with 18O tracer techniques and Raman imaging

Anne Kasperski1,2, Christian Duriez1, Michel Mermoux2

1: Institut de Radioprotection et de Sûreté Nucléaire, PSN-RES, Cadarache BP 3, 13 115 St Paul-Lez-Durance cedex, France; 2: Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, 38 000 Grenoble

10:30am
-
12:00pm
Session 1': Fundamentals of High Temperature Reactions
Location: conference room
Chair: Brian Gleeson, University of Pittsburgh, United States of America
Chair: Fabien Rouillard, CEA, France
 

Effect of elevated pressure on the oxidation of cast iron alloy in water vapor

Mathias Christian Galetz1, Clara Schlereth Schlereth1, Ceyhun Oskay1, Stefan Wanjura2

1: DECHEMA Forschungsinstitut, Germany; 2: Siemens AG Power and Gas Division



The Effect of Microstructure on Steam Oxidation Behavior of the Fe-20Cr-35Ni-2.5 Nb (at.%) Steel at 1073 K

Mitsutoshi Ueda1, Jumpei Ohbayashi1,2, Tatsumi Yao1,3, Masao Takeyama1

1: School of Materials and Chemical Technology, Tokyo Institute of Technology, Japan; 2: Graduate Student, Tokyo Institute of Technology (Present address: Hitachi Metals, Ltd.); 3: Graduate Student, Tokyo Institute of Technology



Internal Oxidation And Microstructural Changes Of Fe-Mn-Si Steels During HFI Welding

Michael Spiegel, Philippe Schaffnit

Salzgitter Mannesmann Forschung Gmbh, Germany

11:30am
-
12:00pm
Session 4: Mechanical aspects of High Temperature Oxidation
Location: conference room
Chair: Eric Leon Andrieu, CIRIMAT-INPT, France
Chair: Dmitry Naumenko, Forschungszentrum Jülich GmbH, Germany
 

Characterization of progressive delamination from a blister induced by laser shock in ceramic coatings

Vincent Maurel, Vincent Guipont

Mines ParisTech, PSL University, France

12:00pm
-
1:30pm
Lunch
12:00pm
-
1:30pm
Lunch
1:30pm
-
4:30pm
Poster A: Fundamentals of High Temperature Reactions
Location: Espace Posters1
Posters from sessions A+E+J to be put in place Monday 11, before lunch
 

Oxidation Properties and Microstructural Evolution of Aluminide Coatings on Ni Base Alloys during High Temperature Exposure

Wencai Leng1, Rishi Pillai2, Timur Galiullin1, Willem J. Quadakkers1, Dmitry Naumenko1

1: Juelich Research Center, Germany; 2: Oak Ridge National Laboratory, USA



Microstructural Change of an Inner Scale Formed on Fe-Ni Alloy during Oxidation

Aya Harashima1,2, Yasumitsu Kondo1, Shigenari Hayashi2

1: Nippon Steel Corporation, Japan; 2: Hokkaido University, Japan



Influence of Atmosphere on High Temperature Oxidation of Fe-Cr Model Alloy

Christophe ISSARTEL1, Henri BUSCAIL1, Marion PONCET1, Stéphane MATHIEU2, Laurence LATU-ROMAIN3, Yves WOUTERS3

1: LVEEM, France; 2: IJL, France; 3: SIMAP, France



Oxidation Behavior Of A Commercial Alumina Forming Alloy - Influence Of Sulfur Traces In The Alloy

Justine ALLO1,2, Samuel JOUEN1, Manuel ROUSSEL2, David GIBOUIN1, Xavier SAUVAGE1

1: Normandie Univ, UNIROUEN, INSA Rouen, CNRS, Groupe de Physique des Matériaux, 76000 Rouen, France; 2: Manoir Industries, 12 Rue des Ardennes - BP 8401 - Pîtres, 27108 Val de Reuil, France



Improvement of the high temperature oxidation resistance of Ti-beta21S by mechanical surface treatments

Luc Lavisse1, Armand Kanjer1, Karine Cheveau1, Pascal Berger2, Albert Tidu3, Christophe Schuman3, Tony Montesin1, Maria del Carmen Marco de Lucas1, Virgil Optasanu1

1: ICB, UMR 6303 CNRS Université de Bourgogne, 9 av. Alain Savary, 21078 Dijon Cedex, France; 2: NIMBE, CEA, CNRS, Université Paris-Saclay, CEA Saclay, 91191, Gif sur Yvette Cedex, France; 3: LEM3-UMR-CNRS 7239, 7 rue Félix Savart, BP 15082, F-57013 Metz Cedex 03, France



Effect of Temperature on the Oxidation Mechanism of Ni-30Cr Alloy

Xian HUANG1,2, Laure MARTINELLI1, Sophie BOSONNET1, Paul FOSSATI1, Laurence LATU-ROMAIN2, Yves WOUTERS2

1: Den-Service de la Corrosion et du Comportement des Matériaux dans leur Environnement (SCCME), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France; 2: Univ. Grenoble-Alpes, CNRS, SIMaP, F-38000 Grenoble, France



Investigating Multi-layer Iron Oxide Scales by Atom Probe Tomography

Amanda Persdotter1, Torben Boll2,3, Torbjörn Jonsson1

1: Chalmers University of technology, Sweden; 2: Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Germany; 3: Karlsruhe Nano Micro Facility (KNMF), Karlsruhe Institute of Technology (KIT), Germany



Quantifying Minor Outward Diffusion through Oxide Scales by Atom Probe Tomography

Samer Daradkeh1,2, Oscar Recalde1,3, Martin Heilmaier1, Torben Boll1,2

1: Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Engelbert-Arnold-Str. 4, D-76131 Karlsruhe, Germany; 2: Karlsruhe Nano Micro Facility (KNMF), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany; 3: Advanced Electron Microscopy Division,Technische Universität Darmstadt, Alarich-Weiss-Straße 2, D-64206, Darmstadt, Germany



Chromium upgrading of standard ferritic stainless steels for SOC applications

Tobias Holt Nørby1, Louis Sadowski Cavichiolo2

1: Haldor Topsøe A/S, Denmark; 2: Technical University of Denmark



Chemical, structural and electronic properties of oxide scale formed at high temperature under synthetic air on stainless steels

Thibault ROY1,2, Laurence LATU-ROMAIN1, Ismaël GUILLOTTE2, Baptiste LATOUCHE2, Yves WOUTERS1

1: SIMaP Laboratory - University Grenoble-Alpes, France; 2: APERAM Stainless Steel



Comparison of Oxidation Behavior of Ti6242, Ti6246, TiXT and Ti685 Alloys

Benjamin Vincent, Luc Lavisse, Virgil Optasanu, Sébastien Chevalier, Ioana Popa, Tony Montesin

ICB, UMR 6303 CNRS Univ de Bourgogne, France



Morphology of the Oxidized Grain Boundaries: influence of the Grain Boundary Energy?

Suzanne Vernier1, Aurélien Prillieux2, Arnaud Proietti3, Eric Andrieu1, Lydia Laffont1

1: CIRIMAT-ENSIACET, France; 2: IRT Saint Exupéry; 3: Centre de microcaractérisation Raimond Castaing



Origins of the depassivation of chromia-forming alloys in silica-based liquids: theoretical and experimental evidences

Victor Szczepan, Carine Petitjean, Pierre-Jean Panteix, Michel Vilasi

Université de Lorraine, France



Influence of noble metals in the growth of the oxide scale in a commercial ferritic stainless steel EN 1.4509

Pablo Navarro1, Andres Nuñez1, Juan F. Almagro1, José A. Odriozola2

1: Acerinox Europa S.A.U.; 2: Instituto de Ciencia de Materiales de Sevilla, Centro Mixto CSIC/University of Seville



Simulation of High-Temperature Steel Oxidation by Means of the Cellular Automata Approach – Model Development and Experimental Verification

Maike Létang1, Katrin Jahns2, Ulrich Krupp1

1: Steel institute, RWTH University, Germany; 2: Faculty of Engineering and Computer Science, University of Applied Sciences Osnabrück, Germany



Comparison of Oxidation Resistance Between MAR-M246 and MAR-M246-modified with Nb at 1000 oC

Renato Baldan1, Laurence Latu-Romain2, Yves Wouters2, Artur Mariano de Sousa Malafaia3

1: Universidade Estadual Paulista, Brazil; 2: Université Grenoble Alpes, France; 3: Universidade Federal de São João Del Rei, Brazil



The Effect of Geometry on the Corrosion Kinetics of Ti-6Al-4V Alloy

Mohamad Mahdi Siblani, Maelig Ollivier, Loïc Favergeon

Mines Saint-Etienne, CNRS, UMR 5307 LGF, 42023 Saint-Etienne France



Effect of corrosive atmosphere on the oxidation behavior of CrMnFeCoNi and CrCoNi alloys

Wencke Schulz1, Christiane Stephan-Scherb1,2, Guillaume Laplanche3

1: Bundesanstalt für Materialforschung und -prüfung (BAM, Germany); 2: Freie Universität Berlin; 3: Ruhr-Universität Bochum, Germany



Modification of Protective Oxide-Scale Structure and Chemistry in High-Temperature Oxidation-Resistant Alloys through Surface Finish Application

Henry Ayoola1, Stephen House1, John Lyons1, Meng Li1, Bingtao Li1,2, Judith Yang1, Wissam Saidi1, Brian Gleeson1

1: University of Pittsburgh, United States of America; 2: Haynes International Inc, United States of America



Delta-Pu alloy oxidation: characterization of oxidation process and growth kinetics using XRD and XPS

Nicolas Favart1, Brice Ravat1, Lionel Jolly1, Benoît Oudot1, Lilian Berlu1, François Delaunay1, Ioana Popa2, Sébastien Chevalier2

1: CEA Valduc, France; 2: ICB UMP 6303 CNRS Univ. Bourgogne Franche-Comté



High Temperature Oxidation Behavior of Ti6242S Ti-based Alloy

Aurelie VANDE PUT1, Charlotte DUPRESSOIRE1, Carole THOURON1, Philippe EMILE2, Raphaëlle PERALDI2, Benjamin DOD2, Daniel MONCEAU1

1: CIRIMAT, Université de Toulouse, CNRS, France; 2: Airbus Operations S.A.S., Toulouse, France



Effect of mechanical loading on interdiffusion in γ-NiCrAl alloys

Camille Salsi1, Daniel Monceau2, Clara Desgranges3, Thomas Gheno1

1: DMAS, ONERA, University Paris Saclay, 92322 Châtillon, France; 2: CIRIMAT, CNRS/Université de Toulouse/INP Toulouse, 31030 Toulouse cedex 4, France; 3: Safran-Tech, Safran-Tech, rue des jeunes bois, Châteaufort, 78772 Magny-les-Hameaux, France



Mechanical Properties of Cr2O3 Bulks at High Temperatures

Makoto Nanko, Takahiro Kosugi

Nagaoka University of Technology, Japan



Electrochemical in-situ monitoring of stainless steel exposed to high temperature and molten salt

Fabiola Pineda1,2

1: Pontificia Universidad Católica de Chile, Chile; 2: Dictuc, Chile



Atmosphere influence on oxidation at high temperature of Ni-Cr-Si model alloys

Marion PONCET, Christophe ISSARTEL, Sébastien PERRIER, Henri BUSCAIL

LVEEM, France



test test test

Marlène Giamporcaro

Toulouse INP, France

Poster E: Mechanical aspects of High Temperature Oxidation
Location: Espace Posters2
Posters from sessions A+E+J to be put in place Monday 11, before lunch
 

Carburization And Stress Profiles In Austenitic And Ferritic Stainless Steels After Exposure At 500 – 650 °C In Carburizing Liquid Sodium: Comparison Between Experimental Observations And Simulations

Mohamed Slim1, Guillaume Geandier1, Marie Romedenne2, Fabien Rouillard3, Daniel Monceau4, Benoit Malard4

1: IJL, France; 2: Materials Science and Technology Division, Oak Ridge National Laboratory, USA; 3: CEA DEN- SCCME, France; 4: CIRIMAT, France



Mechanical Behavior Evolution of Titanium Alloy Exposed at Elevated Temperature.

Quentin SIRVIN1, Damien TEXIER1, Vincent VELAY1, Daniel MONCEAU2, Nicolas VACHE2, Eric ANDRIEU2, Benjamin DOD3, Yannick CADORET3

1: Institut Clément Ader (ICA) – UMR CNRS 5312 ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS ; Albi, France; 2: CIRIMAT- UMR CNRS 5085, ENSIACET-INPT ; Toulouse, France; 3: AIRBUS, Toulouse, France



Effects of reactive elements on the viscoplastic behavior of chromia scales thermally grown on model NiCr alloy

JEAN LUC GROSSEAU POUSSARD

La Rochelle University, France



High Temperature Titanium Alloys Challenges at Airbus

Julia Olszewska1, Fabienne Cournut1, Guillaume Abrivard1, Benjamin Dod2

1: Airbus CRT, France; 2: Airbus Commercial, France



Oxidation of thin Ni-based superalloy specimens: Kinetics Study and Mechanical Tests

Charles Romain1, Damien Texier1, Clara Desgranges2, Jonathan Cormier3, Stéphane Knittel4, Daniel Monceau5, Denis Delagnes1

1: Institut Clement Ader (ICA) - UMR CNRS 5312, Université de Toulouse, CNRS, INSA, UPS, Mines Albi, ISAE-SUPAERO, Campus Jarlard, 81013 Albi Cedex 09, France; 2: SAFRAN-Tech, Materials and Processes Department, Rue des Jeunes Bois, Châteaufort, 78114 Magny-les-Hameaux, France; 3: Institut Pprime, UPR CNRS 3346, ISAE-ENSMA, Chasseneuil-du-Poitou, France; 4: SAFRAN Aircraft Engines, Evry, France; 5: CIRIMAT, Université de Toulouse, CNRS, INPT, UPS, ENSIACET Toulouse, France



Influence of thermal history on change in structure, fracture behavior and stress of iron oxide scale during the isothermal transformation

Kosuke Hayashi1, Yasuyoshi Hidaka1, Kaita Hyodo2, Hideo Cho2, Yurika Yamanouchi3, Shigenari Hayashi3

1: Nippon Steel Corporation, Japan; 2: Aoyama Gakuin University, Japan; 3: Hokkaido University, Japan

Poster J: Advanced characterization techniques
Location: Espace Posters3
Posters from sessions A+E+J to be put in place Monday May,11 before lunch
 

Fast Cooling of Molten Salts as a Means for Coordination Characterization

Juho T. Lehmusto1, J. Matthew Kurley III2, James R. Keiser2, Stephen S. Raiman2

1: Abo Akademi University, Finland; 2: Oak Ridge National Laboratory, TN, USA



Effect of a pre-oxidation on the hydrogen desorption from Zircaloy-4

Clara Juillet1, Frantz Martin1, Quentin Auzoux1, Sophie Bosonnet1, Frédéric Miserque1, Marc Tupin2

1: Den-Service de la Corrosion et du Comportement des Matériaux dans leur Environnement (SCCME), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France; 2: Den-Service d’Etude des Matériaux Irradiés (SEMI), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France



Characterization of the aging of SOFC electrode materials by high temperature ESEM

Renaud PODOR1, Joseph LAUTRU1, Mathew NIANIA2, T. Ben BRITTON2, Stephen SKINNER2, John KILNER2, Bowen SONG3, Samuel J. COOPER4, Antonio BERTEI5, Nigel P. BRANDON3

1: ICSM - UMR5257, France; 2: Department of materials, Imperial College London, UK; 3: Department of Earth Science and Engineering, Imperial College London, UK; 4: Dyson School of Design Engineering, Imperial College London, UK; 5: Department of Civil and Industrial Engineering, University of Pisa, IT



3D surface reconstruction and BSE collection using high temperature ESEM

Renaud PODOR1, Joseph LAUTRU1, Jerôme MENDONCA1,2, Antoine CANDEIAS2, Dorian NOGUES2, Ales KOLOUCH3

1: ICSM - UMR5257, France; 2: NewTEC Scientific, 285 Rue Gilles Roberval, 30900 Nîmes, France; 3: CRYTUR, spol. s r.o., Turnov, Czech Republic



Physicochemical Evolution of the Fuel-Cladding Interface during Irradiation in Pressurized Water Reactor

Cloé Schneider1, Laurent Fayette1, Jérôme Sercombe1, Jérôme Favergeon2, Sébastien Chevalier3

1: CEA Cadarache, France; 2: Laboratoire Roberval - Université de Technologie de Compiègne, France; 3: ICB - Univ. Bourgogne Franche-Comté, France



Characterization of FeMnSiCrNi alloy oxidized at 800 oC in untreated and vacuum annealed conditions

Artur Mariano de Sousa Malafaia1, Laurence Latu-Romain2, Yves Wouters2

1: Universidade Federal de São João Del Rei, Brazil; 2: Université Grenoble Alpes, France

1:30pm
-
4:30pm
Poster B: Modeling, prediction and simulation
Location: Espace Posters1
Posters from sessions B+C+D to be put in place Tuesday 12, before lunch
 

Oxidation driven permeation of iron oxide scales by chloride from experiment guided 1st principles modelling

Valentina Cantatore, Marcedes Andrea Olivas Ogaz, Jesper Liske, Torbjörn Jonsson, Jan-Erik Svensson, Lars-Gunnar Johansson, Itai Panas

Chalmers University of Technology, Sweden



High temperature oxidation of Zr: experimental and numeric anisothermal studies

Laure MARTINELLI1, Caroline TOFFOLON-MASCLET1, Clara DESGRANGES2, Jean-Christophe BRACHET1, Fabrice LEGENDRE3, Sophie BOSONNET1, Daniel MONCEAU4

1: CEA, France; 2: Safran-Tech; 3: Ministère de la transition écologique et solidaire; 4: CIRIMAT



Development Of Hot Corrosion Modelling For Gas Turbines – Towards Application Of Monte Carlo Methods

Nigel Simms1, Joy Sumner1, Anand Kulkarni2

1: Cranfield University, United Kingdom; 2: Siemens Corporation, USA



Mechanistic Point Defect Corrosion Model and Experimental Characterization of Austenitic Stainless-Steel Engine Valves exposed to high temperature CO2

Iman Abdallah1, Taeho Kim1, Mark Caroll2, John H Perepezko3, Adrien Couet1,3

1: Department of Engineering physics, University of Wisconsin-Madison, Madison, WI 53706, USA; 2: Federal-Mogul Powertrain Division Tenneco, Southfield, MI, 48034, USA; 3: Department of Materials Science and Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA

Poster C: Oxidation in complex atmospheres (H2O, CO2, SO2, carburization...)
Location: Espace Posters2
Posters from sessions B+C+D to be put in place Tuesday 12, before lunch
 

Oxidation of 316L Stainless Steel during Plasma Treatments as a function of Temperature and Oxygen Partial Pressure

Carolina ESPARZA-CONTRO1,2, Laurence LATU-ROMAIN1,2, Grégory BERTHOME1, Marc MANTEL1,2

1: SIMaP Université Grenoble-Alpes, France; 2: Centre de Recherche Ugitech SA, France



Corrosion of Titanium Alloys in Pressurized Water at 300 °C and 350 °C

Sabrina SELVA1,2, Quentin BIGNON1,2, Quentin AUZOUX1, Frantz MARTIN1, Amandine RAYNAL1, Frédéric MISERQUE1, Michel TABARANT3, Laurence LATU-ROMAIN2, Yves WOUTERS2

1: Den-Service de la Corrosion et du Comportement des Matériaux dans leur Environnement (SCCME), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France; 2: Université Grenoble Alpes, CNRS, SIMaP, F-38402 Saint Martin d’Hères, France; 3: Den-Service d'Etudes Analytiques et de Réactivité des Surfaces (SEARS), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France



The effect of water vapour on the high temperature oxidation behaviour of Mo-20Si-52.8Ti

Matthias Weber1, Bronislava Gorr1, Hans-Jürgen Christ1, Susanne Ober2, Alexander Kaufmann2, Martin Heilmaier2, Ronja Anton3, Nadine Laska3, Uwe Schulz3

1: Institut für Werkstofftechnik, Universität Siegen, Siegen, Germany; 2: Institut für Angewandte Materialien, Karlsruher Institut für Technologie (KIT), Karlsruhe, Germany; 3: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Koeln, Germany



Evaluation of the oxidation and Cr evaporation properties of selected stainless steels used as BoP materials in SOFC

Mareddy Jayanth Reddy, Jan-Erik Svensson, Jan Froitzheim

High Temprature Corrosion Center, Chalmers University of Technology, Sweden



Oxidation of Mo-Si-B Alloys and Coatings in a Water Vapor Environment

John H Perepezko, Chad Harris

University of Wisconsin-Madison, United States of America



Laboratory corrosion testing under an oxy-fuel biomass combustion atmosphere: establishing a meaningful test on the basis of parameters obtained on a pilot biomass burning plant

Alina Agüero1, Marcos Gutiérrez1, Andrea Illana2, Francisco Javier Pérez2, Manuel Benito3, Alberto Bahillo3

1: Instituto Nacional de Técnica Aeroespacial (INTA), Spain; 2: Universidad Complutense de Madrid; 3: CIEMAT



Comparative Study of High Temperature Materials in Molten Salts for Thermal Storage

Esraa Hamdy1, Johanna Nockert Olovsjö2, Jesper Ejenstam2, Thomas Helander2, Christine Geers1

1: Chalmers University of Technology, Sweden; 2: Kanthal – part of Sandvik Group, Sweden



Factors Affecting Corrosion of Structural Alloys in Molten Halide Salts

Stephen Raiman

Oak Ridge National Laboratory, United States of America



Breakaway characterization of Zircaloy-4 cladding samples oxidized in steam at high temperature using in-situ methods

Roland Zino1,2, Raphaël Chosson2, Maelig Ollivier1, Xavier Haller2, Florent Bourlier2, Eric Serris1

1: Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, Centre SPIN, F - 42023 Saint-Etienne France; 2: Framatome, Fuel BU, FDM, 69456 Lyon France



Oxidation of Austenitic Stainless Steels in Nuclear Primary Water: Effect of Irradiation and Water Chemistry

Cécilie Duhamel1, Anne-Cécile Bach1,2, Marc Maisonneuve1,2, Frantz Martin2, Stéphane Perrin3, Catherine Guerre2, Ian de Curières4, Jérôme Crépin1

1: MINES ParisTech, France; 2: CEA/DEN/DPC/SCCME/LECA; 3: CEA/DEN/DE2D/SEAD/LCBC; 4: IRSN



Corrosion behavior of two industrial nickel base polycristalline superalloys: oxidation and type-II corrosion

Romain Malacarne1,2, Stéphane Mathieu2, Michel Vilasi2, Clara Desgranges1, Stéphane Knittel3

1: Safran Tech; 2: Institut Jean Lamour; 3: Safran Aircraft Engines



Alumina Forming Alloys for Higher Efficiency in Thermal Energy Storage Systems

Jesper Ejenstam, Dilip Chandrasekaran, Maria Ivermark

Kanthal AB, Sweden



Oxidation Resistance in Pure Steam at 650ºC of NiAl Coating Deposited by Ni-electroplating and Al Slurry Application on P92 Steel

Andrea Illana1, Marcos Gutiérrez2, Alina Agüero2, Sonia Mato1, Francisco Javier Pérez1

1: Universidad Complutense de Madrid, Av. Complutense S/N, 28040 Madrid, Spain; 2: Instituto Nacional de Técnica Aeroespacial “Esteban Terradas”, Ctra. de Torrejón de Ardoz a Ajalvir, km 4,500 - 28850-Torrejón de Ardoz (Madrid), Spain



High Temperature Corrosion of CrMnFeNi High Entropy Alloy in Molten Salt

Mohamed elbakhshwan1, William Doniger1, Cody Falconer1, Michael Moorehead1, Calvin Parkin1, Chuan Zhangchuan.zhang@computherm.com2, Kumar Sridharan1, Adrien Couet1

1: University of Wisconsin Madison, United States of America; 2: Computherm Inc., United States of America



Behavior of boehmite sol-gel coated ADIs in water vapor at high temperatures

Olga Tsurtsumia1, Nugzar Khidasheli1, Marianne Nofz2, Regine Sojref2, Lili Nadaraia1, Axel Kranzmann2, Elguja Kutelia1

1: Georgian Technical University, Georgia; 2: Federal Institute for Materials Research and Testing (BAM), Germany



Sulfur contamination during cyclic test in high temperature (1000 oC): failure analysis of furnace super duplex stainless steel support and characterization of superalloy samples

Artur Mariano de Sousa Malafaia1, Rodrigo de Andrade Reis1, Samantha Pinto Gonçalves1, Francis Faria Goulart1, Roseli Marins Balestra1, Renato Baldan2

1: Universidade Federal de São João Del Rei, Brazil; 2: São Paulo State University, Brazil



Microstructure effect of Haynes 282 on the oxidation behavior in pressurized oxy-fuel condition

YOON SEOK KO1,2, Dong-Ik Kim1, Heung Nam Han2

1: Center for Energy Materials Research, Korea Institute of Science and Technology, Seoul, Korea; 2: Department of Materials Science and Engineering, Seoul National University, SEOUL, Korea



Oxidation of Mo-containing stainless-steel during high temperature: coating application against catastrophic oxidation

Andrea Olivas1, Leyla Wickström1, Eric Börjesson2, Hans Magnusson1

1: Swerim AB, Sweden; 2: RISE Research Institutes of Sweden AB, Sweden



High-Temperature Oxidation Behavior of Three Commercial Alloys in the Laboratory Air, 0.1 and 5 MPa CO2

Mohammad Hassan Shirani Bidabadi1,2, Somrerk Chandra-ambhorn1, Chi Zhang2, Hao Chen2, Zhi-Gang Yang2

1: King Mongkut’s University of Technology North Bangkok and Tsinghua university, Thailand; 2: Tsinghua University, Beijing, China

Poster D: Deposit Induced Corrosion
Location: Espace Posters3
Posters from sessions B+C+D to be put in place Tuesday 12, before lunch
 

Thermal Insulation of CMAS (Calcium-Magnesium-Alumino-Silicates)- Attacked Thermal Barrier Coatings

Germain Boissonnet1, Christine Chalk2, John Nicholls2, Gilles Bonnet1, Fernando Pedraza1

1: La Rochelle Université, France; 2: Cranfield University, UK



Crystal orientation and surface preparation effect on hot corrosion of a chromia-forming single crystal nickel-based superalloy

Xabier Montero1, Akira Ishida2, Tobias Meißner1, Hideyuki Murakami2,3, Mathias Galetz1

1: DECHEMA-Forschungsintitut, Germany; 2: National Institute of Materials Science, Research Center for Structural Materials; 3: Department of Nanoscience and Nanoengineering, Graduate School of Advanced Science and Engineering, Waseda University



Performance between Isothermal Type I and Type II Hot Corrosion against In-Situ Cyclic Type I-Type II Hot Corrosion Of Nickel-Based Superalloys

Adnan U Syed1, Tracey Roberts1, Nicolau I. Morar1, Adriana Encinas-Oropesa1, Marlene Grohne2, Martin Frommherz2, John R Nicholls1, Simon Gray1

1: Cranfield University, United Kingdom; 2: MTU Aero Engines, Germany



Corrosion Mechanisms of Structural Materials in Molten Salt Reactors

Alexandre Chmakoff1,2, Sylvie Delpech2, Laure Martinelli1

1: Den-Service de la Corrosion et du Comportement des Matériaux dans leur Environnement (SCCME), CEA, Université Paris-Saclay, F-91191, Gif-sur-Yvette, France; 2: IPNO-IN2P3-CNRS, Groupe Radiochimie, Univ. Paris Sud, Bât. 100, 91406 Orsay, France



The Influence of Chromium and Aluminum on the Oxidation Kinetics After Breakaway Oxidation (Secondary Protection) of FeCrAl Alloys at 600 °C

Johan Eklund, Amanda Persdotter, Sedigheh Bigdeli, Imran Hanif, Torbjörn Jonsson, Jan-Erik Svensson

Chalmers University of Technology, Sweden



Fireside Corrosion of Superheater / Reheater Tubes In Coal and Biomass-fired Combustors – Systematic Data Generation For Database Application

Nigel Simms, Stefano Mori, Joy Sumner, John Oakey

Cranfield University, United Kingdom



Role of MgSO4 in hot corrosion behavior of a NiAl coating on a commercial Ni-based superalloy

Yaping Wang, Rishi Pillai, Elena Yazhenskikh, Dmitry Sergeev, Michael Müller, Willem J. Quadakkers, Dmitry Naumenko

Forschungszentrum jülich, Germany



Evaluation of metallic and ceramic coatings for corrosion protection of waste- and biomass-fired fluidized bed boiler superheater tubes

Rikard Norling, Kristina Hellström, Anders Hjörnhede, Emina Caliskan

RISE Research Institutes of Sweden, Sweden



Corrosion of austenitic steels and nickel alloys in molten KNO3-NaNO3 at different temperatures – role of alloying elements and microstructure

Michael Spiegel1, Patrik Schraven2

1: Salzgitter Mannesmann Forschung Gmbh, Germany; 2: Mannesmann Stainless Tubes



Effects of biomass cofiring with bituminous coal and lignite on nickel-based steel and alloy corrosion

Xabier Montero1, Mario Rudolphi1, Michael Spiegel2, Mathias, C. Galetz1

1: DECHEMA-Forschungsintitut, Germany; 2: Salzgitter Mannesmann Forschung GmbH

4:30pm
-
5:00pm
Coffee break
4:30pm
-
5:00pm
Coffee break
5:00pm
-
6:00pm
Session 4': Mechanical aspects of High Temperature Oxidation
Location: conference room
Chair: Eric Leon Andrieu, CIRIMAT-INPT, France
Chair: Dmitry Naumenko, Forschungszentrum Jülich GmbH, Germany
 

Determination of the Oxygen Enriched Zone of Ti–6Al–4V Alloy and Its Effect On Creep Between 450 and 600°C

Dominique Poquillon1, Coralie Parrens1, Alessandro Pugliara2, Maxime Perrais1, Benoit Malard1

1: CIRIMAT; 2: UMS Castaing



The Effect of Supercritical CO2 exposure at 750 °C on the Mechanical Properties of Stainless Steel and Ni-based Structural Alloys

Juho Lehmusto1, Sebastien Dryepondt2, Bruce A. Pint2

1: Abo Akademi University, Finland; 2: Oak Ridge National Laboratory, TN, USA

5:00pm
-
7:00pm
Session 2: Modeling, prediction and simulation
Location: conference room
Chair: David John Young, University of New South Wales, Australia
Chair: Daniel MONCEAU, CNRS Toulouse-INP UPS, France
 

Zirconium Oxidation at High Temperature - Revisiting Diffusion Profiles

Pierre BARBERIS

Framatome, France



The Effect of Cracking Of Thermally Grown Oxide Layers In Thermal Barrier Coatings Examined Using FIB Tomography And Inverse Modelling

Antony Fry1, Minal Patel1, David Gorman1, Ateeb Farooqui1, Jiyu Wu1, Louise Wright1, Mark Baker2, John Watts2

1: National Physical Laboratory, United Kingdom; 2: University of Surrey, United Kingdom



Investigation and simulation of the influence of the oxide scale damage on the high temperature oxidation kinetics of titanium

Clément CISZAK1, Daniel MONCEAU1, Clara DESGRANGES2

1: CIRIMAT, Université de Toulouse, CNRS, INP-ENSIACET, 4 allée Emile Monso - BP44362, 31030 Toulouse, France; 2: Safran-Tech, Materials and Processes Department, Rue des Jeunes Bois, Châteaufort, 78114 Magny-les-Hameaux, France



Investigating high-temperature corrosion using Calphad approach - Oxidation of FeCrAl alloys after breakaway at 600 ⁰C

Sedi Bigdeli1, Johan Eklund1, Amanda Persdotter1, Imran Hanif1, Henrik Larsson2,3, Jesper Liske1, Torbjörn Jonsson1

1: Chalmers University of Technology, Sweden; 2: KTH Royal Institute of Technology, Sweden; 3: Thermo-Calc software, Sweden

6:00pm
-
7:30pm
Session 5: Alloy Design
Location: conference room
Chair: Michael Spiegel, Salzgitter Mannesmann Forschung Gmbh, Germany
Chair: Clara DESGRANGES, Safran, France
 

About the influence of manganese and silicon on chromia growth: a kinetic and mechanistic investigation of the oxidation behavior of chromia forming nickel-based model alloys

Thomas Perez1, Stéphane Mathieu1, Yohan Parsa2, Laurence Latu-Romain2, Yves Wouters2, Michel Vilasi1

1: University of Lorraine, CNRS, IJL, 54000 Nancy, France; 2: Univ. Grenoble Alpes, CNRS, SIMaP, 38000 Grenoble, France



Development of SOFC Interconnect Stainless Steels for Sustainable Development Goals: a Review

Somrerk Chandra-ambhorn

King Mongkut's University of Technology North Bangkok, Thailand



Measurement of Oxygen Solubility at Oxide-Alloy Interfaces in Multicomponent alloys to Guide Oxidation-Resistant Alloy Design

Rishi Pillai, Jonathan Poplawsky, Michael Brady, Jim Keiser, Bruce Pint

Oak Ridge National Laboratory, United States of America

7:00pm
-
9:00pm
Dinner
7:30pm
-
9:00pm
Dinner
9:00pm
-
10:00pm
Poster A': Fundamentals of High Temperature Reactions
Location: Espace Posters1
Poster E': Mechanical aspects of High Temperature Oxidation
Location: Espace Posters2
Poster J': Advanced characterization techniques
Location: Espace Posters3
9:00pm
-
10:00pm
Poster B': Modeling, prediction and simulation
Location: Espace Posters1
Poster C': Oxidation in complex atmospheres (H2O, CO2, SO2, carburization...)
Location: Espace Posters2
Poster D': Deposit Induced Corrosion
Location: Espace Posters3
Date: Tuesday, 30/Mar/2021
8:30am
-
10:10am
Session 3: Advanced characterization techniques
Location: conference room
Chair: Philippe Marcus, Chimie ParisTech-CNRS, France
Chair: Antony Fry, National Physical Laboratory, United Kingdom
 

Atomic scale observation of early oxidation stages of stainless steel

Philippe Marcus, Li Ma, Frédéric Wiame, Vincent Maurice

Chimie ParisTech-CNRS, France



Description of Some Approaches to Elucidate Oxidation Mechanisms Using PEC-ASTAR Coupling: the Particular Case of Chromia.

Laurence LATU-ROMAIN1, Stéphane MATHIEU2, Michel VILASI2, Gilles RENOU1, Florence ROBAUT1, Yohan PARSA1, Thomas PEREZ2, Thibault ROY1, Xian HUANG3, Laure MARTINELLI3, Sophie BOSONNET3, Paul FOSSATI3, Yves WOUTERS1

1: Univ. Grenoble Alpes, CNRS, SIMaP, 38000 Grenoble, France; 2: IJL, University of Lorraine, France; 3: CEA-Saclay, France

10:10am
-
10:30am
Coffee break
Date: Wednesday, 31/Mar/2021
8:30am
-
10:10am
Session 6: Oxidation of novel metallic materials (intermetallics, MMCs, HEAs...)
Location: conference room
Chair: Shigenari Hayashi, Hokkaido University, Japan
Chair: Laure Martinelli, CEA, France
 

Oxidation behavior of Alx(CoCrFeNi)100-x high entropy alloys

Juliusz Dąbrowa1, Grzegorz Cieślak2, Mirosław Stygar1, Marek Zajusz1, Monika Jawańska1, Aleksander Gil1, Jerzy Jedliński1, Tadeusz Kulik2, Marek Danielewski1

1: AGH University of Science and Technology, Poland; 2: Warsaw University of Technology, Poland



Oxidation Behavior of Advanced Multinary Single Crystalline Co-Base Superalloys Between 850 and 1050 °C

Sebastian P. Hagen, Martin Weiser, Sannakaisa Virtanen

Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Germany



Cr-rich Cr-Si Alloys for Temperatures Beyond Ni-Bases Superalloys: Improvement by Platinum Alloying

Anke Silvia Ulrich1, Christine Geers2, Valentina Cantatore2, Alexander Knowles3, Michael Wharmby4, Itai Panas2, Mathias Christian Galetz1

1: High Temperature Materials, DECHEMA-Forschungsinstitut, Frankfurt am Main, Germany; 2: Sweden Energy and Materials, Chalmers University of Technology, Gothenburg, Sweden; 3: University of Birmingham, School of Metallurgy and Materials, Birmingham, UK; 4: DESY Photon Science, Hamburg, Germany

10:10am
-
11:00am
Coffee break
11:00am
-
12:00pm
Session 7: Oxidation in complex atmospheres (H2O, CO2, SO2, carburization...)
Location: conference room
Chair: Stéphane Mathieu, University of Lorraine, France
Chair: Mathias Christian Galetz, Dechema Forschungsinstitut, Germany
 

Effects of Interactions Among Gaseous Oxidants on Selective Oxidation of Alloy Chromium

Chengyang Jiang, Yun Xie, Jianqiang Zhang, David John Young

Materials Science & Engineering, University of New South Wales, Australia



High-Temperature Corrosion of Additively Manufactured Cu and NiCu Alloys in Carburizing CH4 and CO-Containing Atmospheres

Katrin Jahns1,2, Robin Bappert3, Christian Haase3, Anke S. Ulrich4, Clara Schlereth4, Christine Geers5, Peter Böhlke2, Mathias C. Galetz4, Ulrich Krupp3

1: Faculty of Engineering and Computer Science, University of Applied Sciences Osnabrück, Osnabrueck, Germany; 2: KME Germany GmbH & Co. KG, Osnabrück, Germany; 3: Steel Institute IEHK, RWTH Aachen University, Aachen, Germany; 4: DECHEMA Research Institute, Frankfurt am Main, Germany; 5: Energy and Materials, Chalmers University of Technology, Gothenburg, Sweden

12:00pm
-
1:30pm
Lunch
1:30pm
-
5:00pm
Unstructured afternoon
5:00pm
-
5:30pm
Coffee break
5:30pm
-
8:10pm
Session 7': Oxidation in complex atmospheres (H2O, CO2, SO2, carburization...)
Location: conference room
Chair: Stéphane Mathieu, University of Lorraine, France
Chair: Mathias Christian Galetz, Dechema Forschungsinstitut, Germany
 

Effect of Pre-Irradiation and Environment on Structural Materials Corrosion in Molten Fluoride Salt Reactors

Cody Falconer1, Will Doniger1, Mohamed Elbakshwan2, Kumar Sridharan1,2, Adrien Couet1,2

1: Department of Materials Science & Engineering, University of Wisconsin-Madison, United States of America; 2: Department of Engineering Physics, University of Wisconsin-Madison, United States of America



Corrosion Monitoring of a Commercially Used Stainless Steel in Contact with a Quaternary Molten Salt for CSP Applications

V. Encinas-Sánchez, M.I. Lasanta, M.T. de Miguel, G. García-Martín, Francisco Javier Pérez

Complutense University of Madrid, Spain



Dual Atmosphere Effect at 600 °C - Challenges, Mitigation Strategies and Mechanistical Insights

Claudia Goebel, Kerem O Gunduz, Matthieu Tomas, Jan-Erik Svensson, Jan Froitzheim, Anton chyrkin

Chalmers University of Technology, Sweden



Corrosion Behaviour of Some Commercial Alloys Under Cyclic Reaction in CO2 at 650°C

Xuteng Xi, Jianqiang Zhang, David Young

University of New South Wales, Australia

7:30pm
-
8:30pm
Special Session: Plenary lecture
Location: conference room
Chair: Sébastien Chevalier, Univ. Bourgogne Franche-Comte, France
 

Evolution of ideas and techniques in the field of high temperature oxidation of metals, Part II

Alain Galerie

Université Grenoble Alpes, France

8:30pm
-
10:30pm
Banquet
Date: Thursday, 01/Apr/2021
7:30am
-
8:30am
Poster Hanging
Location: Espace Posters1
Posters from sessions F+G+H+I to be put in place
8:30am
-
10:00am
Session 8: Deposit induced corrosion
Location: conference room
Chair: John H Perepezko, University of Wisconsin-Madison, United States of America
Chair: Michel vilasi, Université de Lorraine, France
 

Environmental Factors Affecting Internal Oxidation of Gas Turbine Components Caused by Deposit-Induced Depletion

Patrick Brennan, Mathew Kovalchuk, Brian Gleeson

University of Pittsburgh, United States of America



Alloy-Induced Hot Corrosion

Joy Sumner, Andrew Potter, Kehinde Okewole, Nigel Simms

Cranfield University, United Kingdom



The Effect of Iron Chloride Formation on Corrosion Under PbCl2 Including Deposits

Hanna Kinnunen1, Sonja Enestam1, Patrik Yrjas2

1: Valmet Technologies Oy, Finland; 2: Åbo Akademi University, Finland

10:00am
-
10:30am
Coffee break
10:30am
-
12:00pm
Session 9: Protective Coatings
Location: conference room
Chair: John Rayment Nicholls, Cranfield University, United Kingdom
Chair: Alina Agüero Bruna, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
 

Behaviour of Aluminized Steels in Pressurized Steam

Fernando PEDRAZA1, Claire BOULESTEIX1, Vladislav KOLARIK2, Maria del Mar JUEZ-LORENZO2, Alina AGUERO3, Ignacio BARAIBAR3, Axel KRANZMANN4, Maria MOSQUERA FEIJOO4, Francisco Javier PEREZ TRUJILLO5, Andrea ILLANA5

1: Université de La Rochelle, France; 2: Fraunhofer Institut für Chemische Technologie, Germany; 3: Instituto Nacional de Técnica Aeroespacial (INTA), Spain; 4: Bundesanstalt für Materialforschung und prüfung (BAM), Germany; 5: Universidad Complutense de Madrid, Spain



Microstructure and thickness effects on breakaway oxidation of MCrAlY coatings: experiments and simulations

Damien TEXIER1, Maxime ECOCHARD1, Catherine RIO2, Thomas GHENO2

1: Institut Clément Ader -UMR CNRS 5312, France; 2: DMAS, ONERA, Université Paris Saclay, France



In-situ monitoring of the oxidation of coated and uncoated austenitic stainless steels at temperatures lower than 600°C

Laurent Brissonneau1, Aurore Mathieu1, Frédéric Navacchia1, Henri Buscail2, Frédéric Riffard2, Raphaël Roland2, Christophe Issartel2, Sébastien Perrier2

1: CEA Cadarache, France; 2: Université Clermont Auvergne, LVEEM

12:00pm
-
2:00pm
Lunch
2:00pm
-
3:30pm
Meetings: Time slot reserved to organize Business meetings
3:30pm
-
5:00pm
Poster F: Protective coatings (including TBC, EBC)
Location: Espace Posters1
Posters from sessions F+G+H+I to be put in place Thursday May,14 before lunch
 

A Novel Phosphate-ceramic Coating for High Temperature Oxidation Resistance of Ti65 Alloys

Lingyan Kong

Institute of metal research, China, People's Republic of



Oxidation Behavior of SOFC Interconnect Steel with CuFe Coating

Shujiang Geng

Northeastern University, China, People's Republic of



Utilizatiion of Oxygen Pump Sensor for the Understanding of Pt Effect on the Formation Kinetics of Alumina

Michihisa Fukumoto1, Kano Nakajima1, Hideyuki Murakami2,3

1: Akita University, Japan; 2: National Institute for Materials Science, Japan; 3: Waseda University, Japan



Evaluation of Oxidation Resistance of Pt-coated Ni-Al Alloys through Oxygen Pump-Sensor

Kano Nakajima1, Michihisa Fukumoto1, Hideyuki Murakami2,3

1: Akita University, Japan; 2: National Institute for Materials Science, Japan; 3: Waseda University, Japan



Non-Line-of-Sight Barrier Coatings for Improved Superalloy Corrosion Lifetimes

David A. Britz1, Lance A. Scudder1, Sukti Chatterjee1, Yuriy Melnik1, Kenichi Ohno1, Eric Liu1, Thomas Knisley1, Jeffrey W. Anthis1, Mark Saly1, David M Thompson1, Haiming Ma2, Brian Gleeson2, Pravin Narwankar1

1: Applied Materials Inc, 3225 Oakmead Village Dr., Santa Clara, California 95054, USA; 2: Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA



Silicon Effect on Type II Hot Corrosion Behavior of Pt-Modified Aluminide Coatings

Seyed Amir Azarmehr, Kourosh Shirvani, Ali Solimani, Xabier Montero, Mathias Galetz

Iranian Research Organization for Science and Technology (IROST), Germany



Differences in the recession phenomena of an yttrium disilicate environmental barrier coating with the velocity of the gases and the moisture content

Francis Rebillat1, Manon Fernandez1,2, Guillaume Couegnat1, Jean-François Henne2

1: Laboratoire des Composites ThermoStructuraux (LCTS), Pessac; 2: Safran Ceramics, Mérignac



Thermochemical And Thermomechanical Interactions Of Molten Sand With Environmental Barrier Coatings

Thibault Mouret, Francis Rebillat, Laurence Maillé

Laboratoire des Composites ThermoStructuraux (LCTS), France



Synthesis of self-regenerating Al-Ni diffusion coating through aluminothermic reduction

Romain Troncy1,2, Fernando Pedraza1,2, Gilles Bonnet1,2

1: La Rochelle Université, France; 2: LaSIE UMR CNRS 7356



Increased resistance of a Nickel-based superalloy to Both High-temperature Oxidation and Type-II Hot Corrosion by an Al/Cr Slurry Coating

Gilles BONNET1, Benjamin GREGOIRE2, Xabier MONTERO2, Mathias GALETZ2, Fernando PEDRAZA1

1: La Rochelle University, France; 2: DECHEMA Forschunginstitut, Germany



Oxidation behavior of flash aluminized pure nickel

Thomas Kepa, Fernando Pedraza

Laboratoire des Sciences de l’Ingénieur pour l’Environnement LaSIE UMR-CNRS 7356, Université de La Rochelle, Avenue Michel Crépeau, 17042 La Rochelle Cedex 1, France



Micro-mechanical Testing of Aged Thermal Barrier Coatings

Minal Patel1,2, Helen Jones1, Tony Fry1, Mark Baker2, John Watts2

1: National Physical Laboratory; 2: University of Surrey



Beneficial Effect Of A Ca-based Coating On The Protection At 1000°C Of A Commercial 20-12Si Stainless Steel

Frédéric Riffard, Rémi Cussat, Henri Buscail, Sébastien Perrier

LVEEM, France



Numerical modeling of the energy evolution in a blister under thermal cycling with consideration of temperature gradients

Lara Mahfouz1,2, Vincent Maurel2, Vincent Guipont2, Basile Marchand2, Florent Coudon1, Mark Harvey1, Alain Koster2

1: Safran Tech, Safran SA; 2: Centre des matériaux MINES ParisTech



New Developments in Molten Salts Corrosion Resistant Coatings for Concentrating Solar Power Plants

Pauline Audigié, Sergio Rodríguez, Alina Agüero

Instituto Nacional de Técnica Aeroespacial (INTA), Spain



Thin Nano-structured La2O3 Coating Deposited by Electroplating to Protect Interconnectors in Solid Oxide Electrolysis

Maria del Mar Juez Lorenzo, Vladislav Kolarik, Erik Walschburger

Fraunhofer ICT, Germany



The Effect of Various Additions on the Oxidation Behaviour of the γ/γ’ Ni-base Alloy

Jarosław DĄBEK, Monika MIGDALSKA, Monika JAWAŃSKA, Magdalena ZIĄBKA, Monika WÓJCIK-BANIA, Jerzy JEDLIŃSKI

AGH University of Science and Technology, Poland



Modified Coatings for High Temperature Protection Obtained via Electroless Plating

Virgilio Genova, Giulia Di Iorio, Cecilia Bartuli, Laura Paglia, Francesco Marra, Giovanni Pulci

Sapienza University of Rome, Italy



A New Strategy to Obtain MCrAlY Protective Coating: Electroless Metal Plating Approach

Francesco Marra, Virgilio Genova, Giulia Di Iorio, Cecilia Bartuli, Laura Paglia, Giovanni Pulci

Sapienza University of Rome, Italy



Pre-Oxidation to Improve Liquid Metal Compatibility

Bruce Pint, Jiheon Jun

Oak Ridge National Laboratory, United States of America



Effectiveness of SiO2/TiO2/Al2O3-based/TiO2 coating for suppressing circumferential cracking in boiler tubes of thermal power plants

Makoto Kawase, Akifumi Ido, Masahiko Morinaga

Central Research Institute of Electric power Industry, Japan



Effect of Fe on Erosion-Corrosion Resistance of Ni-Cr-Fe Alloys in Fluidized Bed Biomass Boiler Condition

Suzue Yoneda1, Yasuki Miyakoshi1, Takashi Kogin2, Eiji Ishikawa3, Manabu Noguchi4, Shigenari Hayashi5

1: Hokkaido Research Organization; 2: Dai-ichi High Frequency Co., Ltd.; 3: EBARA Environmental Plant Co., Ltd.; 4: EBARA Corporation; 5: Hokkaido University



The effect of thermal barrier coatings on the elevated temperature corrosion resistance of TIMETAL 1100 titanium alloy

Jaroslaw Mizera1, Ryszard Sitek2

1: Ecole Polytechnique de Varsovie, Pologne; 2: Ecole Polytechnique de Varsovie, Pologne



In-situ monitoring of the oxidation of coated and uncoated austenitic stainless steels at temperatures lower than 600°C. Part B Fitting and Model

Laurent Brissonneau, Aurore Mathieu, Frédéric Navacchia

CEA Cadarache, France



Evaluation of AISI 409L Stainless Steel without and with Mn-Co Oxide Coating at 600 ºC for the Use as an SOFC Interconnect

Wanna Homjabok, Thammaporn Thublaor, Panya Wiman, Thamrongsin Siripongsakul, Somrerk Chandra-ambhorn

King Mongkut's University of Technology North Bangkok, Thailand

Poster G: Oxidation of novel metallic materials (intermetallics, MMCs, HEAs...)
Location: Espace Posters2
Posters from sessions F+G+H+I to be put in place Thursday May,14 before lunch
 

High temperature oxidation behavior of Ta-Mo-Cr-Ti-Al refractory high entropy alloys with different Ta concentrations

Steven Schellert1, Bronislava Gorr1, Franz Mueller1, Hans-Jürgen Christ1, Stephan Laube2, Hans Chen2, Alexander Kauffman2, Martin Heilmaier2

1: Institut für Werkstofftechnik, Universität Siegen, Siegen, Germany; 2: Institut für Angewandte Materialien, Karlsruher Institut für Technologie (KIT), Karlsruhe, Germany



High Temperature Oxidation and Co-, Cr-Volatilisations from CoCrMo Alloy

Walairat Chandra-ambhorn1, Phacharaphon TUNTHAWIROON2, Pongpun WATASUNTONPONG3, Phisan PONPO1, Kenta Yamanaka4, Akihiko Chiba4, Somrerk Chandra-ambhorn5, Patthranit WONGPROMRAT1

1: Chemical Engineering Department, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, 1 Soi Chalongkrung 1, Ladkrabang, Bangkok, 10520, Thailand.; 2: Industrial Engineering Department, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, 1 Soi Chalongkrung 1, Ladkrabang, Bangkok, 10520, Thailand.; 3: Mechanical Engineering Department, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, 1 Soi Chalongkrung 1, Ladkrabang, Bangkok, 10520, Thailand.; 4: Institute for Materials Research, Tohoku University, 980-8577, Japan.; 5: Department of Materials and Production Technology Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok, 1518, Pibulsongkram Road, Bangsue, Bangkok, 10800, Thailand.



Corrosion Studies of Alumina-Forming Alloys in Liquid Lead Heat Transfer Fluid

Peter Dömstedt1, Kristina Lindgren2, Mattias Thuvander2, Peter Szakálos1

1: Royal Institute of Technology, Sweden; 2: Chalmers University of Technology, Sweden



A Study on High Temperature Oxidation Behavior of the New Developed Ni-Base Alumina-Forming 233 Alloy

Bingtao Li, Lee Pike, Krishna Srivastava, Ramanathan Krishnamurthy

Haynes International, United States of America

Poster H: Ceramics, MAX phases and high temperature ceramic composites
Location: Espace Posters3
Posters from sessions F+G+H+I to be put in place Thursday May,14 before lunch
 

Oxidation resistance of Ti2AlC MAX phase ceramics with different phase composition

Naoya Yamaguchi, Hirotaka Kawasaki, Makoto Nanko

Nagaoka University of Technology, Japan



Influence of Yttrium on Oxidation of Mo(Si,Al)2

Erik Ström1, Aina Edgren1,2, Magnus Hörnqvist Colliander2

1: Kanthal AB; 2: Chalmers University of Technology



Oxidation in Extreme Conditions of Diboride-based Composites Containing Additional Compounds

Charlène Pellegrini1,2, Olivier Rapaud2, Marianne Balat-Pichelin1

1: PROMES-CNRS, UPR8521, 7 rue du four solaire, 66120 Font-Romeu Odeillo (France); 2: IRCER-CNRS, UMR 7315, Centre Européen de la Céramique, 12 Rue Atlantis, 87068 Limoges (France)

Poster I: Influence of additive manufacturing on HTO
Location: Espace Posters4
Posters from sessions F+G+H+I to be put in place Thursday May,14 before lunch
 

Effect of Niobium as Alloying Element on Austenitic Stainless Steels Oxidation.

Henri BUSCAIL, Christophe ISSARTEL, Frédéric RIFFARD

UCA LVEEM, France



High Temperature Corrosion of AISI 316L Stainless Steel: Comparison between Additive Manufacturing and Conventional Metallurgy

Corentin SIRI1, Ioana POPA1, Alexis VION2, Cécile LANGLADE3, Sébastien CHEVALIER1

1: ICB, UMR 6303 CNRS, Univ. Bourgogne Franche-Comté, 21078 Dijon cedex; 2: BV PROTO, rue de Leupe, 90400 Sévenans; 3: ICB-LERMPS, Univ. Bourgogne Franche-Comté, rue de Leupe, 90010 Belfort cedex



Oxidation behavior of Alloy718 built by additive manufacturing

Yen-Ling Kuo1, Shigenari Hayashi1, Koji Kakehi2

1: Hokkaido University, Japan; 2: Tokyo Metropolitan University, Japan



Investigation of the reactivity in oxidizing atmosphere at high temperature of laser beam melted Inconel 625

Nicolas Ramenatte1, Léo Portebois2, Lionel Aranda1, Stéphane Mathieu1, Michel Vilasi1

1: Institut JeanLamour, France; 2: Halle des matériaux, France



Isothermal and Cyclic Oxidation of the Alloy 718 produced by Additive Manufacturing compared to a Wrought 718 alloy

Tom SANVIEMVONGSAK1,2, Daniel MONCEAU1, Martin MADELAIN1, Bruno MACQUAIRE2

1: CIRIMAT, Université de Toulouse, CNRS, Toulouse-INP, UPS, ENSIACET, 4 allée Emile Monso, CS44362, 31030 Toulouse, France; 2: Safran Tech – Safran Group, rue des Jeunes Bois, 78772 Magny-les-Hameaux, France



Influence of high temperature oxidation of Ti-6Al-4V alloy fabricated by laser and electron beam melting on tensile properties at room temperature

Antoine Casadebaigt1,2, Jonathan Hugues2, Daniel Monceau1

1: CIRIMAT, France; 2: IRT SAINT EXUPERY, France

5:00pm
-
5:30pm
Coffee break
5:30pm
-
6:40pm
Session 9': Protective Coatings
Location: conference room
Chair: John Rayment Nicholls, Cranfield University, United Kingdom
Chair: Alina Agüero Bruna, Instituto Nacional de Técnica Aeroespacial (INTA), Spain
 

Oxidation resistance and electrical conductivity of Co-W coated ferritic stainless steel for solid oxide fuel cell application - a comparative study -

LU GAN1,2, Hideyuki MURAKAMI1,2, Xiaber MONTERO3

1: National Institute of Materials Science, Japan; 2: Waseda University, Japan; 3: DECHEMA-Forschungsinstitut, Germany



Advanced design of oxidation protection coatings for Mo-based alloys by magnetron sputtering

Ronja Anton1, Nadine Laska1, Uwe Schulz1, Susanne Obert2, Alexander Kauffmann2, Martin Heilmaier2, Matthias Weber3, Bronislava Gorr3

1: Institute of Materials Research, DLR – German Aerospace Center, Cologne, Germany; 2: Institute of Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; 3: Institute of Materials Engineering, University of Siegen, Siegen, Germany

6:40pm
-
7:10pm
Session 10: Protective coatings (including TBC, EBC)
Location: conference room
Chair: Elizabeth J. Opila, University of Virginia, United States of America
Chair: Fernando PEDRAZA, Université de La Rochelle, France
 

Oxidation behaviour and performance of oxide dispersion strengthened bond coats in thermal barrier coatings

Christoph Vorkötter1, Sebastian Hagen2, Robert Vaßen1

1: Forschungszentrum Jülich GmbH, Germany; 2: Friedrich-Alexander Universität Erlangen-Nürnberg

7:10pm
-
9:00pm
Dinner
9:00pm
-
10:00pm
Poster F': Protective coatings (including TBC, EBC)
Location: Espace Posters1
Poster G': Oxidation of novel metallic materials (intermetallics, MMCs, HEAs...)
Location: Espace Posters2
Poster H': Ceramics, MAX phases and high temperature ceramic composites
Location: Espace Posters3
Poster I': Influence of additive manufacturing on HTO
Location: Espace Posters4
Date: Friday, 02/Apr/2021
8:30am
-
10:00am
Session 10': Protective coatings (including TBC, EBC)
Location: conference room
Chair: Elizabeth J. Opila, University of Virginia, United States of America
Chair: Fernando PEDRAZA, Université de La Rochelle, France
 

Improved CMAS resistance of Environmental Barrier Coatings via Tailoring Phase and Composition of Mixed Rare Earth Silicates

Rebekah I. Webster, Cameron K. Miller, Clark A. Luckhardt, Elizabeth J. Opila

University of Virginia, United States of America



New generation of UHTC matrix composites reinforced with a 3D carbon fibrous preform

Francis Rebillat1, Caroline Liegaut1,3, Pierre Bertrand2, Laurence Maille1

1: Laboratoire des Composites ThermoStructuraux (LCTS), France; 2: Université de Technologie de Belfort-Montbéliard (UTBM), Sévenans; 3: Ariane group, rue de Touban, Le Haillan



Environmental Barrier Coatings based on rare earth silicates: optimization of process parameters and characterization

Giulia Di Iorio, Laura Paglia, Francesco Marra, Virgilio Genova, Giovanni Pulci

Sapienza University of Rome, Italy

10:00am
-
10:30am
Coffee break
10:30am
-
11:00am
Best Poster Award Presentation
Location: conference room
Chair: Michel vilasi, Université de Lorraine, France
Chair: Sébastien Chevalier, Univ. Bourgogne Franche-Comte, France
11:00am
-
12:00pm
Conclusion of the Symposium
Location: conference room
Chair: Bruce Pint, ORNL, United States of America
Highlights of scientific conclusions from the conference with the analysis of the survey
12:00pm
-
1:00pm
Lunch

 
Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: HTCPM 2021
Conference Software - ConfTool Pro 2.6.136+CC
© 2001 - 2021 by Dr. H. Weinreich, Hamburg, Germany