Carburization And Stress Profiles In Austenitic And Ferritic Stainless Steels After Exposure At 500 – 650 °C In Carburizing Liquid Sodium: Comparison Between Experimental Observations And Simulations
Mohamed Slim1, Guillaume Geandier1, Marie Romedenne2, Fabien Rouillard3, Daniel Monceau4, Benoit Malard4
1IJL, France; 2Materials Science and Technology Division, Oak Ridge National Laboratory, USA; 3CEA DEN- SCCME, France; 4CIRIMAT, France
Mechanical Behavior Evolution of Titanium Alloy Exposed at Elevated Temperature.
Quentin SIRVIN1, Damien TEXIER1, Vincent VELAY1, Daniel MONCEAU2, Nicolas VACHE2, Eric ANDRIEU2, Benjamin DOD3, Yannick CADORET3
1Institut Clément Ader (ICA) – UMR CNRS 5312 ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS ; Albi, France; 2CIRIMAT- UMR CNRS 5085, ENSIACET-INPT ; Toulouse, France; 3AIRBUS, Toulouse, France
Effects of reactive elements on the viscoplastic behavior of chromia scales thermally grown on model NiCr alloy
JEAN LUC GROSSEAU POUSSARD
La Rochelle University, France
High Temperature Titanium Alloys Challenges at Airbus
Julia Olszewska1, Fabienne Cournut1, Guillaume Abrivard1, Benjamin Dod2
1Airbus CRT, France; 2Airbus Commercial, France
Oxidation of thin Ni-based superalloy specimens: Kinetics Study and Mechanical Tests
Charles Romain1, Damien Texier1, Clara Desgranges2, Jonathan Cormier3, Stéphane Knittel4, Daniel Monceau5, Denis Delagnes1
1Institut Clement Ader (ICA) - UMR CNRS 5312, Université de Toulouse, CNRS, INSA, UPS, Mines Albi, ISAE-SUPAERO, Campus Jarlard, 81013 Albi Cedex 09, France; 2SAFRAN-Tech, Materials and Processes Department, Rue des Jeunes Bois, Châteaufort, 78114 Magny-les-Hameaux, France; 3Institut Pprime, UPR CNRS 3346, ISAE-ENSMA, Chasseneuil-du-Poitou, France; 4SAFRAN Aircraft Engines, Evry, France; 5CIRIMAT, Université de Toulouse, CNRS, INPT, UPS, ENSIACET Toulouse, France
Influence of thermal history on change in structure, fracture behavior and stress of iron oxide scale during the isothermal transformation
Kosuke Hayashi1, Yasuyoshi Hidaka1, Kaita Hyodo2, Hideo Cho2, Yurika Yamanouchi3, Shigenari Hayashi3
1Nippon Steel Corporation, Japan; 2Aoyama Gakuin University, Japan; 3Hokkaido University, Japan
|
