Conference Agenda

A comparative study of state-of-the-art constitutive models for concrete failure under shear-dominated stress states

K. Basche, A. Dummer, P. Hofer, G. Hofstetter, M. Neuner

Numerical study on prestressed concrete beams made continuous: blind predictions, post-dictions, and sensitivity studies

N. W. Kostense, Y. Yang, M. A. Hendriks, J. G. Rots

Numerical modeling of concrete under large deformations

M. Vazana, M. Jabareen

A position-based framework for modeling reinforced concrete beams and externally FRP-strengthened RC beams

D. S. Bomfim, F. Gatuingt, H. B. Coda, R. R. Paccola

Non-proportional sequentially-linear analysis for masonry structures: capturing combined foundation settlement and push-over loads

Z. Dai, P. A. Korswagen, J. G. Rots

Microstructural characterization and bonding performance evaluation of 3D-printed concrete-mortar composites

J.-S. Kim, C. Yoo, Y. Yang

Towards lattice modelling of additively manufactured cement-based composites with tailored Poisson's ratio-reinforcement

R. J. M. Bol, E. Schlangen, B. Šavija

Assessing structural failure in extrusion-based 3D concrete printing using a plasticity model with non-linear hardening

.-. Saif-Ur-Rehman, A. Robens-Radermacher, J. F. Unger, R. Wolfs

Multiphysics simulation of time-dependent early-age behaviour in 3D printed concrete

Y. Hammad, K. Van Tittelboom, R. Wan-Wendner, J. Vorel

Optimization of mixing time for printcrete using a non-contact monitoring system

R. Sheng, Y. Yuan, J.-Y. Zhang, J.-L. Zhang

Gradient-enhanced damage-plasticity approaches for modeling failure of concrete: phase-field fracture vs. localizing gradient damage

A. Dummer, K. Basche, P. Hofer, G. Hofstetter, T. Mader, M. Neuner

Numerical modelling of interlayer adhesion in 3D-printed concrete with LDPM

Y. Alzoubi, G. Muciaccia, L. Ferrara, A. Cibelli, R. Wan-Wendner

Nonlinear force-based 3D beam model with bond-slip and time-staged prestressing for RC and PC structures

L. Parente, D. Addessi, C.-L. Lee, E. Spacone

J-integral in random elastic medium

J. Eliáš, J. Martinásek, J.-L. Le

On mapping algorithms for material random fields in stochastic FE analysis of quasibrittle structures

J.-L. Le, J. Vievering

Boundary condition strategies for strain localization in discrete periodic unit cell

J. Raisinger, J. Eliáš

Effect of mesostructure heterogeneity on the moisture and heat diffusion in concrete through a multi-phase discrete modelling approach

A. Cibelli, J. Billiet, R. Wan-Wendner, J. Vorel, G. Di Luzio

A novel DEM-based coupled 3D thermo-hydro-mechanical mesoscopic model with phase changes for modelling concrete behavior

M. Krzaczek, J. Tejchman

Building a bio-chemo-mechanical simulation tool for microbial induced carbonate precipitation (MICP) in concrete: coarse graining nano to micro

A. Alex, E. Masoero, I. D. Ofiteru

Hybrid computational framework for nonlinear soil-structure interaction under seismic excitation using subdomain decomposition

F. Osman, S. Li, W. Larbi, N. Ayoub, J. Pais, R. Assaf

Shear and transverse bending in the webs of thin-walled bridge girders

F. Untermarzoner, J. Kollegger

Benchmark on the modelling of RC structures affected by Delayed Ettringite Formation

D. Bouhjiti, R. Zhao

Fracture-based modelling and ductility quantification for structural health monitoring of reinforced concrete

T. Fayyad

Coarse-grained chemo-mechanical simulations: a cornerstone for long-term predictions of concrete degradation

E. Masoero

Three-dimensional analysis of box girders considering nonlinear creep, shrinkage, and cracking effects

G. Di Luzio, G. Odescalchi, F. Puppo, S. Wu

Lessons learned from simulations of the gap test

M. Jirásek, C. Li

Personal reflections on 40 years of research in computational modeling of the load-bearing behavior of concrete structures

G. Hofstetter, A. Dummer, P. Gamnitzer, P. Hofer, M. Schreter, M. Neuner, T. Mader, S. Smaniotto, B. Valentini, B. Winkler