Conference Agenda

Mesoscale discrete modeling of monotonic, cyclic and fatigue loading of concrete

M. Vořechovský, V. Sadílek, J. Eliáš, J. Květoň, J. Mašek

A phase-field damage-plasticity approach for analyzing bonded anchors with supplementing reinforcements

M. Neuner, L. Mitrovic, K. Basche, P. Hofer, A. Dummer, I. Boumakis, N. Vita

An iterative-incremental energy-based micromechanical model for quasi-brittle materials with crack closure and friction

P. H. R. Silveira, R. Esposito

A scalable hybridized mixed finite element formulation for 3D crack propagation under large strain and contact

C. Runcie, A. Bijaya, K. Lewandowski, A. G. Shvarts, L. Kaczmarczyk, C. J. Pearce

A finite volume-based cyclic constitutive model for reinforced concrete

T. Jochyms, S. Grange

Size-effect law in gap test recreated with damaged-plasticity model

M. Szczecina, A. Winnicki

A frictional cohesive zone model for simulating quasi-brittle fracture: time-dependent vs time-independent regularizations of the frictional term

G. Cera, J. G. Rots, F. Messali, A. T. Slobbe

A novel meso-scale numerical implementation of the carbonation kinetics of cementitious materials

M. Tang, J. Billiet, R. Wan-Wendner, Q. T. Phung, S. C. Seetharam, J. Shao, E. Coppens

Multi-scale numerical investigation of freeze–thaw effects on fatigue behavior of RC slabs and development of strain energy-based damage factor

Y. Qin, X. Ji, Y. Takahashi

Multiscale thermo-elastic modeling of hydrating binders for waste confinement

N. Zeaiter, B. Bary, J. Yvonnet, G. La Valle

Multiscale strength modeling of low-carbon cement pastes: the roles of the stiffness of binder constituents and surrogate modeling

S. J. Schmid, M. Königsberger, B. Pichler, A. Ouzia

Influence of wall effect on drying shrinkage of self-compacting concrete

P. Havlasek, V. Smilauer, P. Reiterman, L. Dohnalova, W.-C. Liao

Multiscale modelling of carbonation in concrete made with RCA

E. Thommes, A. Fanara, L. Courard, F. Collin

Establishing trust in nonlinear failure analysis of concrete structures through facilitating nuanced quantification of uncertainties

M. Hendriks

Effects of fluid and aggregate fragmentation on dynamic concrete behavior using a novel DEM-based hydro-mechanical model

M. Krzaczek, M. Nitka, J. Tejchman

Modeling the contact problem for creep analysis in C-S-H nanoindentation

J. Němeček, J. Němečková, J. Němeček

Sensitivity and uncertainty analysis of surrogate-assisted micromechanical models for recycled aggregate concrete with ITZ considerations

A. O. Shittu, L. Göbel

2D framework for mesoscopic concrete simulations enriched with 3D topology information

J. Bobiński, B. Kondys

Microstructural characterization and numerical evaluation of interfacial transition zones in cement-based composites with biomineralized-coated aggregates

S.-Y. Chung, S.-E. Oh, J.-S. Kim

Multiscale modeling of the mechanical properties of mortars containing mineral additions and recycled sand

A. Adessina, J.-F. Barthélémy, A. Ben Fraj

Predictive modeling of concrete carbonation in urban tunnels using experimental data

L. López-de Abajo, J. C. Galvez, M. G. Alberti, A. Moragues

Do we need environmental boundary conditions for the time-dependent material behaviour of concrete?

W. Bachofner, P. Huber

Thermo-hydro-mechanical study of creep in concrete at 150°C and 90% RH: experimental characterization and modeling calibration

S. Cheng, S. Poyet, T. Honorio, B. Bary, F. Hild

Modelling of the wall effect with the two-phase Lattice Discrete Particle Model

J. Billiet, J. Wang, W. Botte, R. Wan-Wendner, J. Vorel

Computational evaluation of strains measured in tubbings of a segmental tunnel lining

M. Sorgner, F. Stadlbauer, A. Razgordanisharahi, C. Hellmich, B. Pichler, T. Pilgerstorfer, B. Moritz

Numerical study on matrix deterioration at the anodic region of impressed current cathodic protection system

Y. Ji, Z. Wang, T. Ishida

DCNN based on X-ray CT images for detection of cracking damage of in-service concrete structure

K. Ikeda, K. Shibano, M. Mukai, T. Suzuki

Study of the impact of coatings on the ageing assessment of double wall concrete containment building without metallic liner

A. Rima, G. El Tabbal, J.-L. Adia

Analysis with FEM and shear-lag theory for predicting stress distribution along interface of post-installed short-length epoxy anchor

A. Satoh

Seismic capacity assessment of existing corroded RC viaduct piers in marine environment

A. Safabakhsh, E. Michelini, S. Ravasini, B. Belletti