Index of Authors

A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding last name. Select the presentation in the right-hand column to access session and presentation details.

Session Overview
 
List by Initial Letter: A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  Ç  Š  All Authors  
List Options: Authors and Sessions · Authors and Sessions (Short Titles) · Authors and Presentations
 
Author(s) Organization(s) Session
Adoua, Richard S.Rolls-RoyceHeat Transfer (II)
Akhtar, TayyabUniversity of Genoa, ItalyAero-acoustics, noise generation and reduction
Alekseik, OlhaAMVALORAxial compressor - Unsteady flows and interactions (I)
Amirante, DarioUniversity of Surrey, United KingdomModelling of Physical Phenomena
Ancora, Tullio Carlo MariaSapienza University of Rome, ItalyOperational experience of turbomachinery and integrated system  Presenter
Ando, TakashiAccelleron Switzerland Ltd. SwitzerlandTelemetry and dynamic pressure measurement
Asli, MajidBrandenburg University of TechnologyCombustor-Turbine Interaction
Aubert, StéphaneEcole Centrale de Lyon, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
aus der Wiesche, StefanMuenster University of Applied Sciences, GermanyAxial Turbine - Unsteady flows and interactions (II)  Presenter
Experimental and measuring techniques
Avanzi, FilippoDepartment of Industrial Engineering, Università degli Studi di Padova, ItalyHydraulic pumps (II)
Bacic, MarkoUniversity of Oxford, United Kingdom;
Rolls-Royce Plc, United Kingdom		Heat Transfer (I)
Bakken, Lars EirikNorwegian University of Science and Technology (NTNU)Radial Compressor
Balkowski, IngoSiemens Energy Global GmbH & Co. KG, GermanyTelemetry and dynamic pressure measurement
Balla, EsztellaBudapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, HungaryAero-acoustics, noise generation and reduction
Barata, Bruno A. C.von Karman Institute for Fluid Dynamics, BelgiumVibration Flutter Instability  Presenter
Baretter, AlbertoUniv. Lille, CNRS, ONERA, Arts et Métiers Institute of Technology, Centrale Lille, UMR 9014-LMFL-Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet, Av. Paul Langevin, Villeneuve-d’Ascq, Lille, F-59000, Hauts de France, FranceAxial Compressor - Unsteady flows and interaction (II)
Bargon, JonasTU Darmstadt, GermanyAxial compressor - Unsteady flows and interactions (I)
Barigozzi, GiovannaUniversità di Bergamo, ItalyHeat Transfer (II)  Presenter
Heat Transfer (II)  Presenter
Barnabei, Valerio FrancescoSapienza University of Rome, ItalyOperational experience of turbomachinery and integrated system
Barnes, ChrisRolls-Royce Plc, United KingdomHeat Transfer (I)
Barrier, RaphaëlDAAA, ONERA, Institut Polytechnique de Paris, 92190 Meudon, FranceAxial compressor - Numerical Simulations
Barsi, DarioUniversity of GenovaAxial Turbines - Design, Analysis and performance
Seals flow  Presenter
Baum, AndreasKSB SE & Co. KGaAHydraulic pumps and marine propeller
Beard, Paul F.University of Oxford, United KingdomHeat Transfer (II)
Bechlars, PatrickMTU Aero EnginesAxial Turbines - Numerical Simulation (III)
Beck, OliverMTU Aero Engines AG, GermanyModelling of Physical Phenomena
Becker, BerndRolls-Royce DeutschlandAxial compressor - Unsteady flows and interactions (I)
Behre, StephanMTU Aero Engines AGSteam Turbines
Békési, BenceBudapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, HungaryAero-acoustics, noise generation and reduction
Bellenoue, MarcPPRIME Institute, CNRS-ENSMA-University of Poitiers, Avenue Clèment Ader 1 86961, Chasseneuil, FranceExperimental and measuring techniques
Bellucci, JuriMorfo Design SRL, Sesto Fiorentino, ItalyAxial Turbines - Numerical Simulations (I)
Benini, ErnestoUniversity of Padova, Italy;
Università di Padova, Italy;
Università Degli Studi di Padova, Italy;
Department of Industrial Engineering, Università degli Studi di Padova, Italy		Axial Turbines - Numerical Simulations (I)
Design and Optimisation methods
Design and Optimisation methods
Fans (and propeller)
Fans (and propeller)
Hydraulic pumps (II)
Bensch, MartinLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Bergmann, MichaelGerman Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)  Presenter
Bermejo, ÓscarITP Aero, SpainVibration Flutter Instability  Presenter
Bernardi, ClaudioPolitecnico di Bari, ItalyVibration Flutter Instability  Presenter
Berten, StefanSulzer Management Ltd, SwitzerlandHydraulic pumps (II)
Beurville, AllanÉcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA  Presenter
Bezdíček, JiříBrno University of Technology, Faculty of Mechanical Engineering, Czech RepublicHydraulic Turbines (II)
Bianchini, AlessandroUniversity of Florence, ItalyWind turbines
Biassoni, DanieleUniversity of GenovaSeals flow
Bień, MaximilianTechnische Universität Braunschweig, GermanyElectric and Hybryd propulsion
Bien, MaximilianTechnische Universität Braunschweig, GermanyOperational experience of turbomachinery and integrated system
Biggs, MatthewSCITEK Consultants Ltd. United KingdomNovel Rigs and Methods III
Billon, KévinUniv. Lyon, Ecole Centrale de Lyon, LTDS UMR 5513, F-69134 Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Binder, NicolasISAE-SUPAERO, Université de Toulouse, 31400 Toulouse, France;
Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO), France		Axial Turbine - Unsteady flows and interactions (I)
Combustor-Turbine Interaction  Presenter
Bode, ChristophTU Braunschweig, GermanyFans (and propeller)
Boes, KevinPurdue University, United States of AmericaCombustor-Turbine Interaction  Presenter
Böhle, MartinUniversity of Kaiserslautern and Landau, GermanyAxial Turbines - Numerical Simulation (III)
Böhle, MartinRheinland-Pfälzische Technische University, GermanyHydraulic pumps and marine propeller
Bois, GérardENSAM-Arts et Métiers Institute of Technology, FranceHydraulic Pumps (I)  Presenter
Boldero, Jason S.Department of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow  Presenter
Bologna, VirginiaUniversity of Genova, Genova, ItalyAxial Turbines - Numerical Simulations (II)  Presenter
Bontempo, RodolfoUniversità degli Studi di Napoli Federico II, ItalyWind turbines  Presenter
Borbouse, MaximeUniversité de Liège, BelgiumTransition and turbulence Modeling  Presenter
Boudet, JérômeÉcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Boufidi, Elissavetvon Karman Institute for Fluid Dynamics, BelgiumAxial Turbines - Design, Analysis and performance
Bousfield, IanRolls-Royce plcFans
Bousquet, YannickISAE-SUPAERO, Université de Toulouse, 31400 Toulouse, France;
Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO), France		Axial Turbine - Unsteady flows and interactions (I)
Combustor-Turbine Interaction
Boussuge, Jean-FrançoisCentre Européen de Recherche et de Formation Avancée en Calcul Scientifique (CERFACS), FranceCombustor-Turbine Interaction
Boust, BastienPPRIME Institute, CNRS-ENSMA-University of Poitiers, Avenue Clèment Ader 1 86961, Chasseneuil, FranceExperimental and measuring techniques
Boxho, MargauxUniversité de Liège, Belgium;
Cenaero, Belgium		Transition and turbulence Modeling
Brach, MathiasUniversité de Liège, BelgiumAxial Compressor - Design Analysis and performance
Brandstetter, ChristophEcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, F-69134 Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Brillert, DieterUniversity of Duisburg-Essen, GermanyOperational experience of turbomachinery and integrated system
Seals flow
Brockmann, Till MartinChair of Turbomachinery at the University of Duisburg-Essen, GermanySeals flow  Presenter
Broglia, RiccardoCNR-INM Institute of Marine Engineering, ItalyWind turbines
Brumana, GiovanniUniversità di Bergamo, ItalyHeat Transfer (II)
Heat Transfer (II)
Brunn, OliverMAN Energy Solutions SESteam Turbines
Brunow, PatrickTU Braunschweig, GermanyFans (and propeller)  Presenter
Buffaz, NicolasSafran Helicopter Engines, FranceCombustor-Turbine Interaction
Butzen, MichaelPurdue UniversityExperimental and measuring techniques
Camarero Pueyo, Josué-InocenteLeibniz University Hannover, Institute of Turbomachinery and Fluid DynamicsSteam Turbines  Presenter
Cambuli, FrancescoDepartment of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, ItalyHydraulic Turbines (II)
Canepa, EdwardUniversity of Genoa, ItalyAero-acoustics, noise generation and reduction
Cantwell, ChrisImperial College London, United Kingdom;
Department of Aeronautics, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom;
Department of Aeronautics, Imperial College London, London, UK		Axial Compressor - Design Analysis and performance
Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling
Cappiello, AlessandroDelft University of Technology, The NetherlandsDesign and Optimisation methods  Presenter
Cardamone, RosalbaSapienza University of Rome, ItalyWind turbines  Presenter
Caries, ValentinÉcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, France;
Safran Aircraft Engines, Moissy-Cramayel, France		Workshop: Open Test Case Fan ECL5 – CATANA
Carlucci, AndreaUniversity of Genoa, ItalyTransition and turbulence Modeling  Presenter
Carta, MarioDepartment of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, ItalyHydraulic Turbines (II)
Casablanca, ManuelUniversità Degli Studi di Padova, ItalyDesign and Optimisation methods  Presenter
Fans (and propeller)  Presenter
Casoni, MarcoUniversità di Padova, Italy;
Università Degli Studi di Padova, Italy		Design and Optimisation methods
Fans (and propeller)
Castorrini, AlessioSapienza University of Rome, ItalyWind turbines
Cattanei, AndreaUniversity of Genoa, ItalyAero-acoustics, noise generation and reduction
Cattoli, GabrieleUniversity of Genova, Genova, Italy;
Morfo Design, Sesto Fiorentino, Firenze, Italy		Axial Turbines - Numerical Simulations (II)
Cavazzini, GiovannaUniversity of Padova, ItalyHydraulic Turbines (I)
Hydraulic Turbines (II)
Cengiz, KenanLeibniz University Hannover, GermanyTransition and turbulence Modeling  Presenter
Chana, KamUniversity of Oxford, United KingdomNovel Rigs and Methods III
Chanahan, NitikornKTH-Royal Institute of Technology, SwedenAxial Turbine - Unsteady flows and interactions (I)
Chatagny, LaurentSulzer Management Ltd, SwitzerlandHydraulic pumps (II)  Presenter
Cherubini, StefaniaPolitecnico di Bari, ItalyVibration Flutter Instability
Christodoulou, MariosSCITEK Consultants Ltd. United KingdomNovel Rigs and Methods III
Chu, Duy-LanhViettel Aerospace Institute, VietnamVibration Flutter Instability
Chung, Jin TaekKorea University, Republic of KoreaHeat Transfer (II)
Ciais, VivianeLiebherr-Aerospace Toulouse SASDesign and Optimisation methods
Cimmino, DanieleSulzer Management Ltd, SwitzerlandHydraulic pumps (II)
Clair, VincentÉcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Cochon, SébastienSafran Aircraft Engines, 77550 Moissy Cramayel, FranceAxial compressor - Numerical Simulations
Çokşen, Ahmetebm-papst Mulfingen GmbH & Co. KG, GermanyRadial Compressor
Cordone, AndreaUniversity of Ferrara, ItalyAxial Compressor - Unsteady flows and interaction (II)
Corral, RoqueUniversidad Politécnica de Madrid, SpainAxial compressor - Numerical Simulations  Presenter
Corsini, AlessandroSapienza University of Rome, ItalyOperational experience of turbomachinery and integrated system
Wind turbines
Wind turbines
Cottier, FrancoisMTU Aero Engines AG, GermanyHeat Transfer (II)
Modelling of Physical Phenomena  Presenter
Crea, ChiaraSafran Aircraft Engines, 77550 Moissy Cramayel, FranceAxial compressor - Numerical Simulations  Presenter
Crespo, JavierITP Aero, SpainVibration Flutter Instability
Da Valle, Lorenzovon Karman Institute for Fluid Dynamics, Belgium;
University of Liege, Belgium		Axial Turbine - Unsteady flows and interactions (II)  Presenter
Daku, GáborBudapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, HungaryAero-acoustics, noise generation and reduction
Aero-acoustics, noise generation and reduction
David, SimurdaInstitute of Thermomechanics, Czech Academy of Sciences, Czech RepublicSteam Turbines
Dazin, AntoineUniv. Lille, CNRS, ONERA, Arts et Métiers Institute of Technology, Centrale Lille, UMR 9014-LMFL-Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet, Av. Paul Langevin, Villeneuve-d’Ascq, Lille, F-59000, Hauts de France, FranceAxial Compressor - Unsteady flows and interaction (II)  Presenter
Axial compressor - Unsteady flows and interactions (I)
De Palma, PietroPolitecnico di Bari, ItalyVibration Flutter Instability
De Vanna, FrancescoUniversity of Padova, Italy;
Università Degli Studi di Padova, Italy;
Department of Industrial Engineering, Università degli Studi di Padova, Italy		Axial Turbines - Numerical Simulations (I)  Presenter
Design and Optimisation methods
Fans (and propeller)
Hydraulic pumps (II)  Presenter
De Vincentiis, LucaMorfo Design, Sesto Fiorentino, Firenze, ItalyAxial Turbines - Numerical Simulations (II)
Delibra, GiovanniSapienza University of Rome, ItalyOperational experience of turbomachinery and integrated system
Wind turbines  Presenter
Della Posta, GiacomoSapienza University of RomeVibration Flutter Instability
Dellacasagrande, MatteoUniversity of Genoa, Italy;
University of Genoa, Genova, Italy		Aero-acoustics, noise generation and reduction
Axial compressor - Numerical Simulations
Axial Turbines - Numerical Simulations (I)
Transition and turbulence Modeling
Delon, XavierCERFACS, FranceAxial Turbines - Numerical Simulation (III)
Deneffe, NathanUniversité de Liège, BelgiumTransition and turbulence Modeling
Deurell, JonasSiemens Energy AB, SwedenFast Dynamic Pressure Measurement
di Mare, FrancescaRuhr-University Bochum, GermanyAxial Turbines - Design, Analysis and performance
Axial Turbines - Numerical Simulation (III)
Axial Turbines - Numerical Simulations (I)
Radial Turbine
Doerffer, PiotrInstitute of Fluid-Flow Machinery, Polish Academy of Sciences (IMP PAN), PolandFans
Dohme, NiklasAerzener Maschinenfabrik GmbH, Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover, Volkswagen AG, GermanyNovel Rigs and Methods IV
Donndorf, JanRuhr-University Bochum, GermanyAxial Turbines - Design, Analysis and performance  Presenter
Duchaine, FlorentCERFACS, FranceAxial Turbines - Numerical Simulation (III)  Presenter
Dufour, GuillaumeISAE-SUPAERO, Université de Toulouse, 31055 Toulouse, FranceAxial compressor - Numerical Simulations
Dygutsch, ThomasGerman Aerospace Center (DLR), GermanyFans
Eifert, AndrewRolls-Royce North AmericaExperimental and measuring techniques
Eschmann, GunterTU Dresden, GermanyHeat Transfer (II)
Eulitz, Frankvon Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, 1640 Rhode-St-Genèse, BelgiumTransition and turbulence Modeling
Vibration Flutter Instability
Facchini, BrunoUniversity of FlorenceAxial Turbines - Design, Analysis and performance
Falsetti, ChiaraDelft University of TechnologyHeat Transfer (II)
FAN, MengENSAM-Arts et Métiers Institute of Technology, FranceHydraulic Pumps (I)
Fang, HuaSchool of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;
Aero-Engine Corporation of China, Hunan Aviation Powerplant Research Institute, China		Novel Rigs and Methods III
Fatahi, SadeghLinköping University, SwedenHeat Transfer (I)
Ferrand, PascalEcole Centrale de Lyon, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Ferraro, FedericaTechnische Universität Braunschweig, GermanyOperational experience of turbomachinery and integrated system
Fiquet, Anne-LiseEcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, F-69134 Ecully, France;
Ecole Centrale de Lyon, France		Workshop: Open Test Case Fan ECL5 – CATANA  Presenter
Workshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Fischer, Alicevon Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, 1640 Rhode-St-Genèse, BelgiumTransition and turbulence Modeling  Presenter
Flaszyński, PawelInstitute of Fluid-Flow Machinery, Polish Academy of Sciences (IMP PAN), PolandFans
Fontaneto, Fabriziovon Karman Institute, Turbomachinery and Propulsion Dept., Rhode-St-Genèse, Belgium;
von Karman Institute for Fluid Dynamics, Belgium		Axial Compressor - Design Analysis and performance
Axial Turbines - Design, Analysis and performance
Franchina, NicolettaUniversità di Bergamo, ItalyHeat Transfer (II)
Heat Transfer (II)
Wind turbines  Presenter
Franke, PascalLeibniz Universität Hannover, GermanyModelling of Physical Phenomena
Frey, ChristianGerman Aerospace Center (DLR), GermanyFans
Workshop: Open Test Case Fan ECL5 – CATANA  Presenter
Frey, YuriRolls-Royce plc, Derby, UKTransition and turbulence Modeling
Frey Marioni, YuriRolls-Royce plcFans
Frey-Marioni, YuriRolls-Royce plc DerbyAxial Compressor - Design Analysis and performance
Fridh, JensKTH-Royal Institute of Technology, SwedenAxial Turbine - Unsteady flows and interactions (I)  Presenter
Friedrichs, JensTechnische Universität Braunschweig, GermanyElectric and Hybryd propulsion
Friedrichs, JensTU Braunschweig, Germany;
Technische Universität Braunschweig, Germany		Fans (and propeller)
Fans (and propeller)
Operational experience of turbomachinery and integrated system
Fröhlig, FriedrichRolls-Royce Solutions GmbH, GermanyDesign and Optimisation methods
Führing, AlexanderMTU Aero Engines AGModelling of Physical Phenomena
Furino, StefanoToffeeX, United KingdomHeat Transfer (I)
Gaeta, GiuliaSapienza University of Rome, ItalyWind turbines
Gaetani, PaoloPolitecnico di Milano, ItalyHeat Transfer (I)
Gallardo, Juan ManuelITP Aero, SpainVibration Flutter Instability
Gallis, PanagiotisDepartment of Energy, Politecnico di Torino, Corso Duca degli Abruzzi 24 10129, Torino, ItalyExperimental and measuring techniques  Presenter
Gansner, OttoPI Electronics AG, SwitzerlandTemperature and combustion measurement
Geiser, GeorgInstitute of Propulsion Technology, German Aerospace Center (DLR)Axial Turbine - Unsteady flows and interactions (I)
Genrup, MagnusLund university, SwedenHydraulic Pumps (I)
Ghirardi, ElisaUniversità di Bergamo, ItalyHeat Transfer (II)
Ghisu, TizianoDepartment of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, ItalyHydraulic Turbines (II)
Giannini, GiovanniDepartment of Industrial Engineering, University of Florence, ItalyWorkshop: Open Test Case Fan ECL5 – CATANA
Giauque, AlexisÉcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Gier, StefanRolls-Royce Deutschland, GermanyTelemetry and dynamic pressure measurement
Gily, MonicaAvio Aero, Torino, ItalyAxial Turbines - Numerical Simulations (I)
Axial Turbines - Numerical Simulations (II)
Giovannini, MatteoMorfo Design SRL, Sesto Fiorentino, ItalyAxial Turbines - Numerical Simulations (I)
Axial Turbines - Numerical Simulations (II)
Giuliani, FabriceCombustion Bay One e.UTelemetry and dynamic pressure measurement
Göing, JanInstitute of Jet propulsion and Turbomachinery, TU Braunschweig, GermanyNovel Rigs and Methods II
Göing, JanTechnische Universität Braunschweig, GermanyElectric and Hybryd propulsion
Göing, JanTU Braunschweig, Germany;
Technische Universität Braunschweig, Germany		Fans (and propeller)
Operational experience of turbomachinery and integrated system
Goinis, GeorgiosGerman Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)
Gopalkrishna, VinodRolls-Royce Plc, United KingdomHeat Transfer (I)
Gößling, JanLeibniz University Hannover, GermanyFans (and propeller)
Gottschalk, NickTU Braunschweig, GermanyFans (and propeller)
Granata, Angelo AlbertoMorfo Design SRL, Sesto Fiorentino, ItalyAxial Turbines - Numerical Simulations (I)
Grasa, SergioPurdue UniversityExperimental and measuring techniques  Presenter
Grosjean, NathalieEcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Grothe, PatrickRolls-Royce DeutschlandAxial compressor - Unsteady flows and interactions (I)
Grubert, JonasInstitute of Jet propulsion and Turbomachinery, TU Braunschweig, GermanyNovel Rigs and Methods II
Fans (and propeller)
Fans (and propeller)  Presenter
Gründmayer, JürgenMTU Aero Engines AG, GermanyFast Dynamic Pressure Measurement
Gunn, EwanTurbostreamWorkshop: Open Test Case Fan ECL5 – CATANA
H. Hanfy, AhmedInstitute of Fluid-Flow Machinery, Polish Academy of Sciences (IMP PAN), PolandFans  Presenter
Habán, VladimírBrno University of Technology, Faculty of Mechanical Engineering, Czech RepublicHydraulic Turbines (II)
Hager, Hans AlexanderChair of Turbomachinery and Flight Propulsion, Technische Universität Dresden, Dresden 01062, GermanyAxial Turbine - Unsteady flows and interactions (II)  Presenter
Hahne, MarioUniversity of Rostock, GermanyHydraulic pumps (II)  Presenter
Hake, LeanderMuenster University of Applied Sciences, GermanyAxial Turbine - Unsteady flows and interactions (II)
Experimental and measuring techniques
Hala, JindrichInstitute of Thermomechanics, Czech Academy of Sciences, Czech RepublicSteam Turbines
Hamabe, MasaakiIHI, JapanAxial Turbines - Numerical Simulations (II)
Hartmann, MaximilianMTU Aero Engines AG, GermanyAxial Turbine - Unsteady flows and interactions (I)  Presenter
Hartung, KonradJade University of Applied Sciences, GermanyDesign and Optimisation methods  Presenter
Hausknecht, JanDatatelTelemetry and dynamic pressure measurement
Helmsen, EikeLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Henke, MichaelAerzener Maschinenfabrik GmbH, Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover, Volkswagen AG, Germany;
Leibniz University Hannover, Germany		Novel Rigs and Methods IV
Novel Rigs and Methods IV
Herbst, FlorianInstitute of Propulsion Technology, German Aerospace Center (DLR)Axial Turbine - Unsteady flows and interactions (I)
Hergt, AlexanderGerman Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)
Hermann, JakobIfTA Ingenieurbüro für Thermoakustik GmbH, GermanyFast Dynamic Pressure Measurement
Hieke, MaxUniversity of Rostock, GermanyHydraulic pumps and marine propeller  Presenter
Hillewaert, Koen AlfonsUniversity of Liège, Aerospace and Mechanical Engineering Dept., Liège, Belgium;
Université de Liège, Faculté des Sciences appliquées, Belgium;
Cenaero, Belgium;
von Karman Institute for Fluid Dynamics, Belgium		Axial Compressor - Design Analysis and performance
Axial Turbines - Design, Analysis and performance
Transition and turbulence Modeling
Axial Compressor - Design Analysis and performance  Presenter
Hills, NickUniversity of Surrey, United KingdomModelling of Physical Phenomena
Hoang, Nhat-MinhViettel Aerospace Institute, VietnamVibration Flutter Instability  Presenter
Hoerner, StefanOVGU, GermanyHydraulic Turbines (I)
Höschler, KlausBrandenburg University of TechnologyCombustor-Turbine Interaction
Huang, MingruiSchool of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, ChinaNovel Rigs and Methods III
Hudec, MartinBrno University of Technology, Faculty of Mechanical Engineering, Czech RepublicHydraulic Turbines (II)
Hueso Rebassa, JosepCranfield UniversityFans
Hümmer, DanielIfTA Ingenieurbüro für Thermoakustik GmbH, GermanyFast Dynamic Pressure Measurement
Hushmandi, NarminLund university, SwedenHydraulic Pumps (I)  Presenter
Inhestern, LukasPurdue University, United States of AmericaCombustor-Turbine Interaction
Isler, Joao AndersonDepartment of Aeronautics, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom;
Department of Aeronautics, Imperial College London, London, UK		Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling  Presenter
Axial Compressor - Design Analysis and performance
Israel, UteMTU Aero Engines AG, GermanyHeat Transfer (II)  Presenter
Jan, GöingTechnical University Braunschweig, Institute of Jet Propulsion and Turbomachinery, GermanyElectric and Hybryd propulsion
Janiga, GáborOtto von Guericke University Magdeburg, Faculty of Process and Systems Engineering, Institute of Fluid Dynamics and Thermodynamics, GermanyAero-acoustics, noise generation and reduction
Janus, BertramDLR, GermanyNovel Rigs and Methods I
Jäppelt, BernhardMTU Aero Engines AG, GermanyModelling of Physical Phenomena
Jasmund, ChristophTechnische Universität Dresden, GermanyAxial compressor - Unsteady flows and interactions (I)  Presenter
Jeschke, PeterInstitute of Jet Propulsion and Turbomachinery, RWTH Aachen UniversityNovel Rigs and Methods IV
Job, Tim-DavidLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Jörg, SophiaInstitute of Power Plant Technology, Steam and Gas Turbines, RWTH Aachen University, GermanyOperational experience of turbomachinery and integrated system
Joseph, PierricUniv. Lille, CNRS, ONERA, Arts et Métiers Institute of Technology, Centrale Lille, UMR 9014-LMFL-Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet, Av. Paul Langevin, Villeneuve-d’Ascq, Lille, F-59000, Hauts de France, FranceAxial Compressor - Unsteady flows and interaction (II)
Axial compressor - Unsteady flows and interactions (I)  Presenter
Jung, FelixTU Darmstadt, GermanyAxial compressor - Unsteady flows and interactions (I)
Kaczyński, PiotrInstitute of Fluid-Flow Machinery, Polish Academy of Sciences (IMP PAN), PolandFans
Kainz, MarcANSYSWorkshop: Open Test Case Fan ECL5 – CATANA
Kaneider, SimonLandshut University of Applied Sciences, GermanyExperimental and measuring techniques
Karaefe, Renan Emreebm-papst Mulfingen GmbH & Co. KG, GermanyRadial Compressor
Kariman, Mohammad RezaTU Wien, AustriaSteam Turbines
Karpuk, StanislavTechnical University Braunschweig, Institute of Aircraft Design and Lightweight Structures, GermanyElectric and Hybryd propulsion
Kerikous, Emeel Botrous ShafikOVGU, GermanyHydraulic Turbines (I)  Presenter
Kim, Hye RimLeibniz University Hannover, GermanyWind turbines  Presenter
Kirkup, JoeUniversity of Oxford, United KingdomNovel Rigs and Methods III
Klappenberger, MoritzUniversity of Kaiserslautern and Landau, GermanyAxial Turbines - Numerical Simulation (III)  Presenter
Klausmann, FabianTU Darmstadt, GermanyAxial compressor - Unsteady flows and interactions (I)
Klose, BjörnGerman Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)
Kluge, TimLeibniz Universität Hannover, GermanyModelling of Physical Phenomena
Kocian, FrankDLR, GermanyNovel Rigs and Methods I
Kohl, Joop MoritzInstitute of Turbomachinery and Fluid Dynamics (TFD), Leibniz University Hanover, GermanyAxial Compressor - Design Analysis and performance
Koster, MaxLufthansa Technik AG, HamburgAxial Compressor - Unsteady flows and interaction (II)
Kouaissah, OtmanUniversity of Bergamo, ItalyWind turbines
Kovács, Kinga AndreaBudapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, HungaryAero-acoustics, noise generation and reduction
Kováts, PéterOVGU, GermanyHydraulic Turbines (I)
Kramer, SarahArianeGroup GmbH, Munich, GermanyNovel Rigs and Methods I
Kreitz, KatharinaVectoflow GmbH, GermanyAerodynamic and Vibration Measurements
Krewinkel, RobertMAN Energy Solutions SE, TU Graz AustriaHeat Transfer (II)
Krewinkel, RobertGraz University of Technology, Institute of Thermal Turbomachinery and Machine DynamicsAxial Turbines - Numerical Simulation (III)
Kuestner, ChristophInstitute of Turbomachinery and Fluid Dynamics (TFD), Leibniz University Hanover, GermanyAxial Compressor - Design Analysis and performance
Kuntzagk, StefanLufthansa Technik AG, HamburgAxial Compressor - Unsteady flows and interaction (II)
Küstner, ChristophLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyElectric and Hybryd propulsion
Lachenmaier, NicolasRolls-Royce Solutions GmbH, GermanyDesign and Optimisation methods  Presenter
Landfester, ChristianGerman Aerospace Center (DLR), Institute of Future Fules, CologneAxial Turbines - Numerical Simulation (III)
Lange, MartinTechnische Universität Dresden, Germany;
Chair of Turbomachinery and Flight Propulsion, Technische Universität Dresden, Dresden 01062, Germany		Axial compressor - Unsteady flows and interactions (I)
Axial Turbine - Unsteady flows and interactions (II)
Lantz, AndreasSiemens Energy AB, SwedenTemperature and combustion measurement
Laufer, Anna-LisaGE Aerospace, Advanced Aviation Technology, 85748 Garching bei München, Germany.Axial Turbine - Unsteady flows and interactions (II)
Lavagnoli, SergioVon Karman Institute, Belgium;
von Karman Institute for Fluid Dynamics, Belgium		Axial Turbine - Unsteady flows and interactions (II)
Axial Turbine - Unsteady flows and interactions (II)
Transition and turbulence Modeling
Le Guyader, SébastienSafran Helicopter Engines, FranceCombustor-Turbine Interaction
Lea, BenediktRuhr-University-Bochum, GermanyRadial Turbine  Presenter
Lemmer, JanInstitute of Jet Propulsion and Turbomachinery, RWTH Aachen UniversityNovel Rigs and Methods IV
Lengani, DavideUniversity of Genova, Italy;
University of Genoa, Genova, Italy		Axial compressor - Numerical Simulations
Axial Turbines - Numerical Simulations (I)
Seals flow
Leonardi, StefanoUniversity of Texas at DallasVibration Flutter Instability
Lewis, LeoUniversity of Oxford, United KingdomHeat Transfer (I)
Li, HaidongRolls-RoyceHeat Transfer (II)
Licheri, FabioDepartment of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, ItalyHydraulic Turbines (II)  Presenter
Lieder, DanielTechnische Universität Braunschweig, GermanyOperational experience of turbomachinery and integrated system  Presenter
Linnemann, NickUniversity of Duisburg-Essen, GermanyOperational experience of turbomachinery and integrated system  Presenter
Lippinois, EricSafran Aircraft Engines, 77550 Moissy-Cramayel, FranceAxial Turbine - Unsteady flows and interactions (I)
Lo Presti, FedericoRuhr University Bochum, GermanyAxial Turbines - Numerical Simulation (III)
Radial Turbine
Axial Turbines - Design, Analysis and performance
Axial Turbines - Numerical Simulations (I)
Lock, Gary D.Department of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow
Loir, VictorThe von Karman Institute for Fluid Dynamics, BelgiumRadial Turbine  Presenter
Lopes, GustavoVon Karman Institute, Belgium;
von Karman Institute for Fluid Dynamics, Belgium		Axial Turbine - Unsteady flows and interactions (II)
Transition and turbulence Modeling
Löschner, UdoUniversity of Applied Sciences Mittweida, GermanyDesign and Optimisation methods
Lück, SebastianTechnical University Braunschweig, Institute of Jet Propulsion and Turbomachinery, Germany;
Technische Universität Braunschweig, Germany		Electric and Hybryd propulsion
Electric and Hybryd propulsion  Presenter
Operational experience of turbomachinery and integrated system
Ludeneit, FelixLeibniz University Hannover, Institute of Turbomachinery and Fluid DynamicsVibration Flutter Instability  Presenter
Lundbladh, AndersGKN Aerospace, SwedenHydraulic Pumps (I)
Lundgren, JonasSAABHeat Transfer (I)
Luquet, DavidSafran Aircraft Engines, 77550 Moissy-Cramayel, FranceAxial Turbine - Unsteady flows and interactions (I)
Macafee, IanWIKA Optical Sensing Ltd, United KingdomFast Dynamic Pressure Measurement
MacManus, DavidCranfield UniversityFans
Fans (and propeller)
Maennle, TobiasRolls-Royce Solutions GmbH, GermanyDesign and Optimisation methods
Magrini, AndreaUniversità di Padova, Italy;
Università Degli Studi di Padova, Italy;
Department of Industrial Engineering, Università degli Studi di Padova, Italy		Design and Optimisation methods  Presenter
Design and Optimisation methods
Fans (and propeller)  Presenter
Fans (and propeller)
Hydraulic pumps (II)
Mailach, RonaldTechnische Universität Dresden, Germany;
Chair of Turbomachinery and Flight Propulsion, Technische Universität Dresden, Dresden 01062, Germany		Axial compressor - Unsteady flows and interactions (I)
Axial Turbine - Unsteady flows and interactions (II)
Malcaus, MariaDepartment of Industrial Engineering, University of Florence, ItalyWorkshop: Open Test Case Fan ECL5 – CATANA
Manna, MarcelloUniversità degli Studi di Napoli Federico II, ItalyWind turbines
Mansour, MichaelMechanical Power Engineering Department, Faculty of Engineering—Mataria, Helwan University, Cairo 11718, Egypt;
Laboratory of Fluid Dynamics & Technical Flows, University of Magdeburg “Otto Von Guericke”, 39106 Magdeburg, Germany		Hydraulic Pumps (I)  Presenter
Marathi, JagannathBosch Digital Twin Industries, GermanyAerodynamic and Vibration Measurements
Marconcini, MicheleDepartment of Industrial Engineering, University of Florence, ItalyWorkshop: Open Test Case Fan ECL5 – CATANA
Maroldt, NiklasLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyExperimental and measuring techniques
Vibration Flutter Instability
Martin, LoïcSafran Aero Boosters, BelgiumVibration Flutter Instability
Martinez Luque, RaulSafran Aircraft Engines, FranceFans
Marty, JulienDAAA, ONERA, Institut Polytechnique de Paris, 92190 Meudon, France;
Département Aérodynamique, Aéroélasticité, Acoustique, Office National d’Études et de Recherches Aérospatiales (ONERA), Université Paris Saclay, F-92190 Meudon, France		Axial compressor - Numerical Simulations
Axial Compressor - Unsteady flows and interaction (II)
Mason, SamSCITEK Consultants Ltd. United KingdomNovel Rigs and Methods III
Matesanz-Garcia, JesusUniversidad Politécnica de Madrid, SpainAxial compressor - Numerical Simulations
Mauersberger, StefanUniversity of Applied Sciences Mittweida, GermanyDesign and Optimisation methods
Mennicken, MaximilianGerman Aerospace Center (DLR), GermanyFans (and propeller)
Meyer, MarcusRolls-Royce DeutschlandAxial Compressor - Design Analysis and performance
Modelling of Physical Phenomena
Transition and turbulence Modeling
Meyer, PatrickTechnische Universität Braunschweig, GermanyElectric and Hybryd propulsion
Mhgoub, MosaabTechnical University of BerlinCombustor-Turbine Interaction  Presenter
Mian, Haris HameedNorwegian University of Life Sciences, NorwayWind turbines
Mihalyovics, JanSiemens Energy Global GmbH & Co. KG, GermanyFast Dynamic Pressure Measurement
Mimic, DajanInstitute of Turbomachinery and Fluid Dynamics (TFD), Leibniz University Hanover, Germany;
Leibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, Germany;
Leibniz Universität Hannover, Germany;
Cluster of Excellence SE²A – Sustainable and Energy Efficient Aviation TU Braunschweig, Braunschweig, Germany		Axial Compressor - Design Analysis and performance
Electric and Hybryd propulsion
Modelling of Physical Phenomena
Modelling of Physical Phenomena  Presenter
Misul, Daniela AnnaDepartment of Energy, Politecnico di Torino, Corso Duca degli Abruzzi 24 10129, Torino, ItalyExperimental and measuring techniques
Möller, Felix M.German Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)
Axial Turbines - Numerical Simulation (III)
Montomoli, FrancescoImperial College London, United Kingdom;
ToffeeX, United Kingdom;
Department of Aeronautics, Imperial College London, London, UK		Axial Compressor - Design Analysis and performance
Heat Transfer (I)  Presenter
Transition and turbulence Modeling
Moriguchi, ShotaIHI, JapanAxial Turbines - Numerical Simulations (II)  Presenter
Morsbach, ChristianGerman Aerospace Center (DLR), GermanyAxial Compressor - Unsteady flows and interaction (II)
Moxey, DavidDepartment of Engineering, King’s College London, Strand Campus, London, WC2R 2LS, United KingdomAxial Turbines - Numerical Simulations (II)
Mushtaq, NoraizPolitecnico di Milano, ItalyHeat Transfer (I)
Nachtigal, PhilippLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyElectric and Hybryd propulsion  Presenter
Nadali Najafabadi, HosseinLinköping University, SwedenHeat Transfer (I)  Presenter
Naqavi, IftekharRolls-Royce plc DerbyAxial Compressor - Design Analysis and performance
Nascimben, FrancescoUniversity of Padova, ItalyHydraulic Turbines (I)  Presenter
Nghiem, Quoc-HuyViettel Aerospace Institute, VietnamVibration Flutter Instability
Nguyen, Phi-MinhViettel Aerospace Institute, VietnamVibration Flutter Instability
Nilberto, AlessandroUniversity of Genoa, ItalyAero-acoustics, noise generation and reduction  Presenter
Notaristefano, AndreaAvio Aero, Torino, ItalyAxial Turbines - Numerical Simulations (II)
Obertacke, RalfEVI-GTIAerodynamic and Vibration Measurements
Aerodynamic and Vibration Measurements
Odenbach, StefanTU Dresden, GermanyHeat Transfer (II)
Steam Turbines
Oehlert, KarstenJade University of Applied Sciences, GermanyDesign and Optimisation methods
Oettinger, MarcelMTU Aero Engines AG, GermanyAxial Turbine - Unsteady flows and interactions (I)
Modelling of Physical Phenomena
Orsini, LorenzoUniversity of FlorenceAxial Turbines - Design, Analysis and performance  Presenter
Seals flow
Ottavy, XavierCNRS, Ecole Centrale de Lyon, INSA Lyon, Universite Claude Bernard Lyon 1, LMFA, UMR5509, F-69134 Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Palermo, DonatoGKN Aerospace, SwedenHydraulic Pumps (I)
Palkus, KacperMTU Aero Engines Polska, Tajecina 108, 36-002, Jasionka, Poland;
Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland		Seals flow  Presenter
Paniagua, GuillermoPurdue University, United States of AmericaCombustor-Turbine Interaction
Experimental and measuring techniques
Paoletti, BenoitEcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, 69130, Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA
Papi, FrancescoUniversity of Florence, ItalyWind turbines
Pastorino, Giacomovon Karman Institute for Fluid Dynamics, Belgium;
Université de Liège, Faculté des Sciences appliquées, Belgium		Axial Turbines - Design, Analysis and performance  Presenter
Patinios, MariosGE Aerospace, Advanced Aviation Technology, 85748 Garching bei München, Germany.Axial Turbine - Unsteady flows and interactions (II)
Pavesi, GiorgioUniversity of Padova, ItalyHydraulic Turbines (I)
Pehle, LukasInstitute of Power Plant Technology, Steam and Gas Turbines, RWTH Aachen University, GermanyOperational experience of turbomachinery and integrated system  Presenter
Pérez, ÓscarITP Aero, SpainVibration Flutter Instability
Persico, GiacomoPolitecnico di Milano, ItalyWind turbines
Petronio, DanieleUniversity of Genova, Genova, Italy;
University of Genoa, Italy		Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling
Petrovic, VojislavJoanneum Research GmbH, AustriaTelemetry and dynamic pressure measurement
Picchi, AlessioUniversity of FlorenceAxial Turbines - Design, Analysis and performance
Pilkington, AndrewUniversity of Oxford, United KingdomHeat Transfer (I)  Presenter
Pinardi, AndreaPolitecnico di Milano, ItalyHeat Transfer (I)  Presenter
Pinelli, LorenzoDepartment of Industrial Engineering, University of Florence, ItalyWorkshop: Open Test Case Fan ECL5 – CATANA  Presenter
Pinelli, MicheleUniversity of Ferrara, Italy;
University of Ferrara - Department of Engineering, Via Saragat 1, 44122, Ferrara, Italy		Axial Compressor - Unsteady flows and interaction (II)
Hydraulic Pumps (I)
Pini, MatteoDelft University of Technology, The NetherlandsDesign and Optimisation methods
Piovan, MattiaUniversity of Ferrara, ItalyAxial Compressor - Unsteady flows and interaction (II)
Piovesan, TommasoCranfield University, United KingdomFans (and propeller)  Presenter
Polklas, ThomasMAN Energy Solutions SESteam Turbines
Prinsier, Johanvon Karman Institute for Fluid Dynamics, BelgiumVibration Flutter Instability
Pronk, Ola IlsethNorwegian University of Science and Technology (NTNU)Radial Compressor  Presenter
Przytarski, Pawel JanUniversity of Genova, ItalyAxial compressor - Numerical Simulations  Presenter
Puddu, PierpaoloDepartment of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, ItalyHydraulic Turbines (II)
Pueyo, Josué-Inocente CamareroLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Rabs, MichaelMAN Energy Solutions SE, Oberhausen, GermanyNovel Rigs and Methods IV
Radermacher, BenediktTU Darmstadt, GermanyAxial compressor - Unsteady flows and interactions (I)  Presenter
Raina, GretaSafran Aircraft Engines, 77550 Moissy-Cramayel, France;
ISAE-SUPAERO, Université de Toulouse, 31400 Toulouse, France		Axial Turbine - Unsteady flows and interactions (I)  Presenter
Rannou, ClemenceUniv. Lille, CNRS, ONERA, Arts et Métiers Institute of Technology, Centrale Lille, UMR 9014-LMFL-Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet, Av. Paul Langevin, Villeneuve-d’Ascq, Lille, F-59000, Hauts de France, France;
Département Aérodynamique, Aéroélasticité, Acoustique, Office National d’Études et de Recherches Aérospatiales (ONERA), Université Paris Saclay, F-92190 Meudon, France		Axial Compressor - Unsteady flows and interaction (II)
Rasquin, MichelCenaero, BelgiumTransition and turbulence Modeling
Rätz, HenningAerzener Maschinenfabrik GmbH, Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover, Volkswagen AG, GermanyNovel Rigs and Methods IV
Rees, ThomasToffeeX, United KingdomHeat Transfer (I)
Rinnert, TobiasTechnische Universität Berlin, GermanyHydraulic pumps and marine propeller  Presenter
Rispoli, FrancoSapienza University of Rome, ItalyOperational experience of turbomachinery and integrated system
Wind turbines
Rocca, AndreaCenaeroAxial Compressor - Design Analysis and performance
Rödiger, TimLandshut University of Applied Sciences, GermanyExperimental and measuring techniques  Presenter
Romanò, FrancescoUniv. Lille, CNRS, ONERA, Arts et Métiers Institute of Technology, Centrale Lille, UMR 9014-LMFL-Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet, Av. Paul Langevin, Villeneuve-d’Ascq, Lille, F-59000, Hauts de France, FranceAxial Compressor - Unsteady flows and interaction (II)
Röseler, TobiasSulzer Pumpen (Deutschland) GmbHHydraulic pumps (II)
Roths, JohannesPhotonics Laboratory, Munich University of Applied Sciences, Germany MTU Aero Engines AG, GermanyTemperature and combustion measurement
Roussette, OlivierArts et MétiersAxial compressor - Unsteady flows and interactions (I)
Rovira Sala, CarolaGerman Aerospace Center (DLR), Germany;
Universidad Politécnica de Madrid, Spain		Fans  Presenter
Rozi, KhoiriDiponegoro University, Semarang, IndonesiaSteam Turbines
Rudas, BartolomejDoosan Skoda Power, Czech RepublicSteam Turbines
Rudolf, PavelBrno University of Technology, Faculty of Mechanical Engineering, Czech RepublicHydraulic Turbines (II)
Russo, MatteoUniversity of Genoa, Genova, ItalyAxial Turbines - Numerical Simulations (I)  Presenter
Sadowski, WojciechRuhr University Bochum, GermanyAxial Turbines - Numerical Simulations (I)
Radial Turbine
Salvadori, SimoneDepartment of Energy, Politecnico di Torino, Corso Duca degli Abruzzi 24 10129, Torino, ItalyExperimental and measuring techniques
Sangan, Carl M.Department of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow
Santolin, Alberto45 Engineering S.r.l, ItalyHydraulic Turbines (II)
Saracoglu, BayindirThe von Karman Institute for Fluid Dynamics, BelgiumRadial Turbine
Sato, HirokiIHI, JapanAxial Turbines - Numerical Simulations (II)
Satta, FrancescaUniversity of Genoa, Genova, ItalyAxial Turbines - Numerical Simulations (I)
Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling
Schappler, MoritzLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Schatz, MarkusHelmut-Schmidt-University Hamburg, GermanyModelling of Physical Phenomena  Presenter
Schiffer, Heinz-PeterTU Darmstadt, GermanyAxial compressor - Unsteady flows and interactions (I)
Schlechtriem, StefanInstitute of Space Propulsion, German Aerospace Center (DLR), Lampoldshausen, GermanyNovel Rigs and Methods I
Schluess, DanielMTU Aero Engines AG, GermanyAxial Turbine - Unsteady flows and interactions (I)
Schneider, Alexandra PatriziaEcole Centrale de Lyon, CNRS, Universite Claude Bernard Lyon 1, INSA Lyon, LMFA, UMR5509, F-69134 Ecully, FranceWorkshop: Open Test Case Fan ECL5 – CATANA
Workshop: Open Test Case Fan ECL5 – CATANA  Presenter
Schnell, RainerGerman Aerospace Center (DLR), GermanyFans
Fans (and propeller)
Schoenbeck, RaykAneCom AeroTest, GermanyNovel Rigs and Methods IV
Schricker, AlexanderPiezocryst GmbHTelemetry and dynamic pressure measurement
Schuler, JohannaLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyExperimental and measuring techniques  Presenter
Schulz, YannikInstitute of Turbomachinery and Fluid Dynamics (TFD), Leibniz University Hanover, GermanyAxial Compressor - Design Analysis and performance  Presenter
Schulze, SebastianRuhr University Bochum, GermanyAxial Turbines - Numerical Simulations (I)  Presenter
Schuster, SebastianChair of Turbomachinery at the University of Duisburg-Essen, GermanySeals flow
Schwarz, TimRheinland-Pfälzische Technische University, GermanyHydraulic pumps and marine propeller  Presenter
Schwarzer, DanielLeibniz University Hannover, GermanyWind turbines
Scobie, James A.Department of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow
Seehausen, HendrikLeibniz University Hannover, GermanyTransition and turbulence Modeling
Seel, ThomasLeibniz University Hannover, GermanyNovel Rigs and Methods IV
Serena, AlbertoNorwegian University of Science and Technology (NTNU)Radial Compressor
Seume, ErikTechnische Universität Braunschweig, GermanyOperational experience of turbomachinery and integrated system
Seume, Joerg R.Aerzener Maschinenfabrik GmbH, Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover, Volkswagen AG, GermanyNovel Rigs and Methods IV
Seume, Joerg R.Leibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyExperimental and measuring techniques
Vibration Flutter Instability
Steam Turbines
Shenouda, MenaLaboratory of Fluid Dynamics & Technical Flows, University of Magdeburg “Otto Von Guericke”, 39106 Magdeburg, GermanyHydraulic Pumps (I)
Sherwin, SpencerImperial College London, United Kingdom;
Department of Aeronautics, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom;
Department of Aeronautics, Imperial College London, London, UK		Axial Compressor - Design Analysis and performance
Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling
Shi, ShengxianSchool of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, ChinaNovel Rigs and Methods III
Siddiqui, Muhammad SalmanNorwegian University of Life Sciences, NorwayWind turbines
Siller, HenriGerman Aerospace Center (DLR), Institute of Propulsion Technology, GermanyAerodynamic and Vibration Measurements
Silvio, GeistHelmut-Schmidt-University Hamburg, GermanyModelling of Physical Phenomena
Simoni, DanieleUniversity of Genoa, Genova, ItalyAxial Turbines - Numerical Simulations (I)
Transition and turbulence Modeling
Sisti, ManuelaUniversity of Oxford, United KingdomHeat Transfer (II)  Presenter
Siviero, MonicaUniversity of Padova, ItalyHydraulic Turbines (II)
Slama, VaclavDoosan Skoda Power, Czech RepublicSteam Turbines  Presenter
Souverein, LouisInstitute of Space Systems, University of Stuttgart, Germany
Novel Rigs and Methods I
Stadler, AndreaPhotonics Laboratory, Munich University of Applied Sciences, Germany MTU Aero Engines AG, GermanyTemperature and combustion measurement
Stapelfeldt, SinaImperial College London, United KingdomAxial Turbine - Unsteady flows and interactions (II)
Štefan, DavidBrno University of Technology, Faculty of Mechanical Engineering, Czech RepublicHydraulic Turbines (II)  Presenter
Steinkamp, NelliMTU Aero Engines AGSteam Turbines
Stotz, StephanMTU Aero Engines AGOperational experience of turbomachinery and integrated system
Stöwer, MarcelLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics, GermanyElectric and Hybryd propulsion
Suchla, Dominik AntonLeibniz Universität Hannover, GermanyModelling of Physical Phenomena  Presenter
Suman, AlessioUniversity of Ferrara, ItalyAxial Compressor - Unsteady flows and interaction (II)
Suman, AlessioUniversity of Ferrara - Department of Engineering, Via Saragat 1, 44122, Ferrara, ItalyHydraulic Pumps (I)
Tang, HuiDepartment of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow
Teichel, Sönkeebm-papst Mulfingen GmbH & Co. KG, GermanyRadial Compressor  Presenter
Tejero, FernandoCranfield UniversityFans  Presenter
Thamsen, Paul UweTechnische Universität Berlin, GermanyHydraulic pumps and marine propeller
Thévenin, DominiqueOVGU, GermanyHydraulic Turbines (I)
Thévenin, DominiqueLaboratory of Fluid Dynamics & Technical Flows, University of Magdeburg “Otto Von Guericke”, 39106 Magdeburg, GermanyHydraulic Pumps (I)
Thilker, FynnFH | JOANNEUM Gesellschaft mbH, AustriaNovel Rigs and Methods II
Thomas, AnastasiaLGTechLink, USTemperature and combustion measurement
Thore, Carl-JohanLinköping University, SwedenHeat Transfer (I)
Thys, MarsUniversité de Liège, BelgiumTransition and turbulence Modeling
Tiedemann, ChristianDLR, GermanyNovel Rigs and Methods III
Tieghi, LorenzoSapienza University of Rome, ItalyWind turbines
Tomlin, RubenToffeeX, United KingdomHeat Transfer (I)
Toracchio, Riccardovon Karman Institute, Turbomachinery and Propulsion Dept., Rhode-St-Genèse, Belgium;
University of Liège, Aerospace and Mechanical Engineering Dept., Liège, Belgium		Axial Compressor - Design Analysis and performance  Presenter
Torner, BenjaminUniversity of Rostock, GermanyHydraulic pumps (II)
Trafford, AlexImperial College London, United KingdomAxial Turbine - Unsteady flows and interactions (II)  Presenter
Uffrecht, WielandTU Dresden, GermanyHeat Transfer (II)
Steam Turbines
Umbricht, WalterDistran-Zürich, SwitzerlandNovel Rigs and Methods II
Unton, TimRolls-Royce North AmericaExperimental and measuring techniques
Vad, JánosBudapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, HungaryAero-acoustics, noise generation and reduction  Presenter
Aero-acoustics, noise generation and reduction  Presenter
Vasilopoulos, IliasRolls-Royce DeutschlandModelling of Physical Phenomena  Presenter
Vazquez, RaulRolls-Royce plc, Derby, UKTransition and turbulence Modeling
Vazquez-Diaz, RaulRolls-Royce plc DerbyAxial Compressor - Design Analysis and performance
Vella, SimonDepartment of Mechanical Engineering, University of Bath, Bath, United KingdomSeals flow
Verstraete, TomThe von Karman Institute for Fluid Dynamics, BelgiumRadial Turbine
Vivarelli, GuglielmoImperial College London, United Kingdom;
Department of Aeronautics, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom;
Department of Aeronautics, Imperial College London, London, UK		Axial Compressor - Design Analysis and performance  Presenter
Axial Turbines - Numerical Simulations (II)
Transition and turbulence Modeling
Voigt, JakobLeibniz University Hannover, Institute of Turbomachinery and Fluid DynamicsAxial Turbines - Numerical Simulation (III)  Presenter
von Hößlin, StefanMTU Aero Engines AG, GermanyAerodynamic and Vibration Measurements
Vorreiter, ArneAerzener Maschinenfabrik GmbH, Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover, Volkswagen AG, GermanyNovel Rigs and Methods IV
Waldhauser, WolfgangJoanneum Research GmbH, AustriaTelemetry and dynamic pressure measurement
Wanzek, SilkeMTU Aero Engines AG, GermanyModelling of Physical Phenomena
Weigel, Bernhard V.TU Dresden, GermanyHeat Transfer (II)  Presenter
Steam Turbines  Presenter
Weiler, HenrikLufthansa Technik AG, HamburgAxial Compressor - Unsteady flows and interaction (II)
Wein, LarsLeibniz University Hannover, Institute of Turbomachinery and Fluid Dynamics;
Leibniz Universität Hannover, Germany		Axial Turbines - Numerical Simulation (III)
Modelling of Physical Phenomena
Transition and turbulence Modeling
Wind turbines
Werner-Spatz, ChristianLufthansa Technik AG, HamburgAxial Compressor - Unsteady flows and interaction (II)
Willinger, ReinhardTU Wien, AustriaSteam Turbines  Presenter
Wingel, ChristopherInstitut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO), FranceCombustor-Turbine Interaction
Wirsum, ManfredInstitute of Power Plant Technology, Steam and Gas Turbines, RWTH Aachen University, GermanyOperational experience of turbomachinery and integrated system
Witte, MatthiasUniversity of Rostock, GermanyHydraulic pumps and marine propeller
Wurm, Frank-HendrikUniversity of Rostock, GermanyHydraulic pumps (II)
Hydraulic pumps and marine propeller
Yao, ChunhuiSchool of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, ChinaNovel Rigs and Methods III
Ye, JunjieDepartment of Aeronautics, Imperial College London, South Kensington Campus, London, SW7 2AZ, United KingdomAxial Turbines - Numerical Simulations (II)  Presenter
Yin, TingyunUniversity of Cagliari, ItalyHydraulic Turbines (I)  Presenter
Zachos, PavlosCranfield University, United KingdomFans (and propeller)
Zamiri, AliKorea University, Republic of KoreaHeat Transfer (II)
Zanetti, GiacomoUniversity of Padova, Italy;
45 Engineering S.R.L., Italy		Hydraulic Turbines (I)
Hydraulic Turbines (II)  Presenter
Zanini, NicolaUniversity of Ferrara, Italy;
University of Ferrara - Department of Engineering, Via Saragat 1, 44122, Ferrara, Italy		Axial Compressor - Unsteady flows and interaction (II)  Presenter
Hydraulic Pumps (I)
Zeisberger, AndreasPhotonics Laboratory, Munich University of Applied Sciences, Germany MTU Aero Engines AG, GermanyTemperature and combustion measurement
Zeng, FeiAero-Engine Corporation of China, Hunan Aviation Powerplant Research Institute, ChinaNovel Rigs and Methods III
Zhuang, QingyuanSiemens, NetherlandsAxial Compressor - Unsteady flows and interaction (II)  Presenter