| Abbassi, Abderrahman | Faculty of Sciences, Marrakesh, Morocco | Lean and Six Sigma in Services Healthcare |
| Abdeljaouad, Mohamed Amine | Commissariat à l'Energie Atomique et aux Energies Alternatives (CEA), France | Metaheuristics for production systems Presenter |
| Abdelkafi, Nizar | Politecnico di Milano, Italy | Operations Management in Engineer-to-Order Manufacturing |
| Abdul-Nour, Georges | Université du Québec à Trois-Rivières, Canada (QC) | Regular session : Maintenance improvement and lifecycle management |
| Abdulfatah, Tarek | Volvo Group Trucks Operations, Sweden | Smart and sustainable production and supply chains |
| Abe, Jair Minoro | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains
Regular Session : Robotics and Human aspects |
| Abraham, Emerson Rodolfo | RESUP- Research Group in Supply Chain Management - Postgraduate Program in Production Engineering, Universidade Paulista, São Paulo, Brazil | Production Management in Food Supply Chains |
| Acerbi, Federica | Politecnico di Milano, Italy | Marco Garetti Doctoral Workshop Track 1 - Acerbi Federica
Regular Session : Green production and circularity concepts Presenter |
| Achergui, Abdelhalim | Univ. Artois, UR 3926, Laboratoire de Genie Informatique et d'Automatique de l'Artois (LGI2A), 62400 Bethune, France | Regular Session : Improvement models and methods for green and innovative systems Presenter |
| Adrodegari, Federico | Department of Mechanical and Industrial Engineering, University of Brescia, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Adulyasak, Yossiri | HEC Montréal | Sustainability in Production Planning and Lot-Sizing |
| Aghezzaf, El-Houssaine | Ghent University, Belgium;
Industrial Systems Engineering (ISyE), Flanders Make, Belgium | Regular session : Improvement of design and operation of manufacturing systems
Sustainability in Production Planning and Lot-Sizing |
| Agrawal, Rajeev | Malaviya National Institute of Technology, India;
Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur (Rajasthan) INDIA - 302017, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Agrawal, Tarun Kumar | Department of Sustainable Production Development, KTH Royal Institute of Technology, Södertälje, Sweden | Data-driven methods for Supply Chain optimization Presenter |
| AIT MALEK, Hasnaa | LCFC, France;
Stellantis, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| AKTAS, EMEL | Cranfield University, United Kingdom | Production Management in Food Supply Chains |
| ALAOUI, NAJOUA | EMINES, Morocco;
Pantheon-Assas, Paris II University;
EMINES, Mohammed VI Polytechnique University | Marco Garetti Doctoral Workshop Track 2 - Alaoui Najoua
Regular session : Improvement of design and operation of manufacturing systems Presenter |
| Alewijnse, Bartje M. | University of Groningen, Netherlands | Smart Methods and Techniques for Sustainable Supply Chain Management Presenter |
| Alfnes, Erlend | Norwegian University of Science and Technology (NTNU), Trondheim, Norway | Operations Management in Engineer-to-Order Manufacturing |
| Alieva, Jamila | University of Gavle, Sweden | The New Digital Lean Manufacturing Paradigm |
| Allaoui, Hamid | Univ. Artois, UR 3926, Laboratoire de Genie Informatique et d'Automatique de l'Artois (LGI2A), 62400 Bethune, France | Regular Session : Improvement models and methods for green and innovative systems
Regular session : Maintenance improvement and lifecycle management |
| ALLAVENA, Thierry | Stellantis, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Almasarwah, Najat | Mutah University, Jordan | Regular Session : Robotics and Human aspects |
| Alonso, Ruben | R2M Solution Srl, Italy | Digital twins based on systems engineering and semantic modeling |
| Alvela Nieto, M.T. | University of Bremen, Faculty of Production Engineering, BIK-Institute for Integrated Product Development, 28359 Bremen, Germany | Regular Session : Advanced modelling approaches Presenter |
| Alves, Anabela | University of Minho, Portugal | The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice |
| Alves, Ricardo Rodrigo | Toyota, Brasil | Lean and Six Sigma in Services Healthcare |
| Alves de Queiroz, Thiago | Institute of Mathematics and Technology, Federal University of Catal˜ao, Catal˜ao-GO, Brazil | Production Management in Food Supply Chains |
| Amaral, Laryssa Carvalho de | Fluminense Federal University;
Federal Fluminense University - UFF, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Amaro, Paulo | Centro ALGORITMI, University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Amelete, Sam Gontran | Université du Québec à Trois-Rivières, Canada (QC) | Regular session : Maintenance improvement and lifecycle management Presenter |
| Amodeo, Lionel | University of Technology of Troyes, France | Hybrid Approaches for Production Planning and Scheduling |
| Andersen, Ann-Louise | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Anderson, Matthew | Glasgow Caledonian University, United Kingdom | Digital Transformation Approaches in Production Management Presenter |
| Angelakis, Panagiotis | LMS-University of Patras, Greece | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Ansari, Fazel | Vienna University of Technology (TU Wien), Austria | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Antomarioni, Sara | Università Politecnica delle Marche, Italy | Regular session : Maintenance improvement and lifecycle management Presenter |
| Antosz, Katarzyna | Rzeszow University of Technology, Poland | Lean and Six Sigma in Services Healthcare Presenter
Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Anzoom, Rashid | University of Illinois, Urbana-Champaign, United States of America | Regular Session : Advanced modelling approaches |
| Apostolou, Dimitris | Information Management Unit (IMU), Institute of Communication and Computer Systems (ICCS), National Technical University of Athens (NTUA), Greece | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Arica, Emrah | SINTEF, Norway | Digital Transformation Approaches in Production Management |
| Arlinghaus, Julia C. | Fraunhofer-Institut für Fabrikbetrieb und -automatisierung IFF | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Arlinghaus, Julia C. | Otto-von-Guericke-Universität Magdeburg, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Arnone, Maurizio | LINKS FOUNDATION - Leading Innovation & Knowledge for Society, via Pier Carlo Boggio 61, 10138 Torino, Italy | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Ashouri, Sahand | Politecnico di Milano | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Aubry, Alexis | Université de Lorraine, CNRS, CRAN | Hybrid Approaches for Production Planning and Scheduling |
| Audy, Jean-François | Université du Québec à Trois-Rivières, Canada | Regular Session : Simulation and optimization of systems performances |
| Augustyn, Aleksandra | Rzeszow University of Technology, Poland | Lean and Six Sigma in Services Healthcare |
| Avazneli, Beka | Georgian Technical University, Georgia | System Identification for Manufacturing Control Applications |
| Avdeeva, Zinaida | Institute of control sciences RAS, Russian Federation | System Identification for Manufacturing Control Applications Presenter |
| AZZAMOURI, AHLAM | EMINES, Mohammed VI Polytechnique University | Regular session : Improvement of design and operation of manufacturing systems |
| Baalsrud Hauge, Jakob A.H.D. | Bremer Institut fuer Produktion und Logistik GmbH an der Universität Bremen, Germany;
HSB-City University of Applied Science, Bremen, Germany | Serious Games Analytics: Improving Games and Learning Support |
| Baalsrud Hauge, Jannicke | BIBA - Bremer Institut für Produktion und Logistik GmbH at the University of Bremen, Germany;
KTH – Royal Institute of Technology, Sweden | Data-based services as key enablers for Smart Products, Manufacturing and Assembly
Digital Transformations Towards Supply Chain Resiliency
Serious Games Analytics: Improving Games and Learning Support Presenter |
| Babai, M. Zied | Kedge Business School, France | Regular session : Additive Manufacturing and mass customization |
| BABOLI, Armand | INSA Lyon- LIRIS Laboratory, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Babovic, Elmir | “Dzemal Bijedic” University, Faculty of Information Technologies, Bosnia and Herzegovina | Digital Transformation Approaches in Production Management |
| Badakhshan, Ehsan | University of York, United Kingdom | Digital twins in companies first developments and future challenges Presenter |
| Badulescu, Yvonne | Geneva School of Business Administration, University of Applied Sciences Western Switzerland (HES-SO), Switzerland | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Bag, Surajit | University of Johannesburg, South Africa | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 Presenter |
| Bakhtadze, Natalia | V.A.Trapeznikov Institute of Control Sciences of Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications
System Identification for Manufacturing Control Applications |
| Ball, Peter | University of York, United Kingdom | Digital twins in companies first developments and future challenges |
| BALLOT, Eric | Centre de Gestion Scientifique - I3 - UMR CNRS 9217, MINES ParisTech, PSL Research University, 60 boulevard Saint-Michel, 75006 Paris, France | Digital twins based on systems engineering and semantic modeling |
| Bamoumen, Meryem | EMINES School of Industrial Management, Université Mohammed VI Polytechnique, Maroc | Modern scheduling and applications in industry 4.0 Presenter |
| Banaszak, Zbigniew | Koszalin University of Technology, Poland | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Barbosa, Christiane | Universidade Federal do Pará, Brazil | Lean and Six Sigma in Services Healthcare Presenter
Lean and Six Sigma in Services Healthcare |
| Barbosa, Christiane Lima | Pará Federal University, Belém, Pará, Brazil. | Lean and Six Sigma in Services Healthcare |
| Bari, Andrea | Politecnico di Torino, DIGEP, Corso Duca degli Abruzzi 24, 10129 Torino, Italy | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Barkhausen, Max | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems |
| Basten, Rob | Eindhoven University of Technology, The Netherlands | Regular session : Additive Manufacturing and mass customization |
| battaia, olga | KEDGE Business School Campus Bordeaux, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Battaïa, Olga | Kedge Business School, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| battini, daria | Department of Management and Engineering, University of Padova, Italy | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Bauernhansl, Thomas | Fraunhofer IPA, Germany | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Bazhina, Darya | National Research University Higher School of Economics (HSE University), Russian Federation | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty
Regular Session : Advanced modelling approaches |
| Belkadi, Farouk | Ecole Centrale de Nantes, France;
Ecole Central de Nantes, Laboratory of digital Sciences of Nantes, ECN-LS2N-UMR 6004 | Engineering of Smart-Product-Service-Systems of the Future
Regular session : Additive Manufacturing and mass customization |
| Bellenguez, Odile | IMT Atlantique | Sustainability in Production Planning and Lot-Sizing |
| Beltrame Canciglieri, Arthur | Industrial and Systems Engineering Graduate Program, Pontifical Catholic University of Parana, Curitiba, Brazil;
Robert Bosch, Ind. Plant - Curitiba, Brazil | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Ben Khalifa, Fatma | UR OASIS, ENIT, Tunisia | Regular session : Maintenance improvement and lifecycle management Presenter |
| Ben-Ammar, Oussama | Mines Saint-Etienne, Univ. Clermont Auvergne, CNRS UMR 6158 LIMOS, Centre CMP, Departement SFL, F-13541 Gardanne, France. | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Ben-Ammar, Oussama | Mines Saint-Etienne, France;
Department of Manufacturing Sciences and Logistics, Mines Saint-Etienne, University Clermont Auvergne, CNRS, UMR 6158 LIMOS CMP, Gardanne, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing
Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Bendadou, Abderrahim | LR-OASIS, National Engineering School of Tunis,University of Tunis El Manar, Tunis, Tunisia | Regular session : Optimization of supply chain agility and reconfigurability Presenter |
| Bendik, Falko | Otto-von-Guericke-Universität Magdeburg, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Benier, Vincent | Airbus Helicopters, 13700, Marignane, France | Regular session : Crossdock and transportation issues |
| Bennis, Fouad | Ecole Centrale de Nantes, France | Regular session : Optimization of production and transportation systems |
| BENTAHA, M.-Lounes | University of Lyon, France | Metaheuristics for production systems Presenter |
| Benvenga, Marco Marco Antonio Campos | Paulista University-Graduate Program in Production Engineering, Brazil | Production Management in Food Supply Chains |
| Benyoucef, Lyes | Aix-Marseille University, University of Toulon, CNRS, LIS, Marseille, France;
Aix-Marseille University, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing
New trends and challenges in Reconfigurable, Flexible or Agile Production System
Recent Advances in Sustainable Manufacturing |
| Bergeron, Erik | Université du Québec à Trois-Rivières, Canada | Regular Session : Simulation and optimization of systems performances |
| BERGHMAN, Lotte | TOULOUSE BUSINESS SCHOOL, France | Regular session : Crossdock and transportation issues |
| Bergmann, Ulf | Otto-von-Guericke-University, Germany | Regular session : Improvement of design and operation of manufacturing systems
Regular Session : Simulation and optimization of systems performances Presenter |
| Bernard, Alain | Centrale Nantes (LS2N UMR CNRS 6004), Nantes, France | Regular session : Frameworks and conceptual modelling for systems and services efficiency
Regular session : Optimization of supply chain agility and reconfigurability |
| Bernard, Alain | Ecole Centrale de Nantes, France;
Ecole Central de Nantes, Laboratory of digital Sciences of Nantes, ECN-LS2N-UMR 6004 | Engineering of Smart-Product-Service-Systems of the Future
Regular session : Additive Manufacturing and mass customization |
| Bernardini, Flávio Amadeu | Paulista University, Brazil | Regular Session : Robotics and Human aspects Presenter |
| Berrah, Lamia | Laboratoire d'Informatique, Systèmes, Traitement de l'Information et de la Connaissance (LISTIC), Université Savoie Mont Blanc;
LISTIC Université Savoie Mont Blanc, France | Digital Transformation of SME Manufacturers: The Crucial Role of Standard
Regular session : Maintenance improvement and lifecycle management |
| Berthier, Alice | University of Technology of Troyes, France | Hybrid Approaches for Production Planning and Scheduling |
| Bettayeb, Belgacem | CESI, LINEACT EA 7527, Lille Campus, 8 boulevard Louis XIV, 59046 Lille, France. | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Bevilacqua, Maurizio | Università Politecnica delle Marche, Italy | Regular session : Maintenance improvement and lifecycle management |
| Bhalla, Swapnil | Norwegian University of Science and Technology (NTNU), Trondheim, Norway | Operations Management in Engineer-to-Order Manufacturing Presenter |
| Bhowmick, Bhaskar | Indian Institute of Technology, Kharagpur, 721302, India | Digital Transformations Towards Supply Chain Resiliency |
| BIAN, Yuan | University of Chinese Academy of Sciences, China, People's Republic of | Finance-Driven Supply Chain Presenter |
| Birkie, Seyoum Eshetu | KTH Royal Institute of Technology, Sweden | Smart and sustainable production and supply chains Presenter |
| Bititci, Umit S | Edinburgh Business School, Heriot-Watt University | Recent Advances in Sustainable Manufacturing |
| Bocewicz, Grzegorz | Koszalin University of Technology, Poland | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Boffelli, Albachiara | University of Bergamo, Italy | Regular Session : Green production and circularity concepts |
| Bohlen, Lasse | Technische Universität Dresden, Chair of Business Informatics, esp. Intelligent Systems and Services, Germany | Blockchain in the Operations and Supply Chain Management |
| Bojko, Michael | Department of Factory Planning and Factory Management, Chemnitz University of Technology, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Bokhorst, J.A.C. | University of Groningen, Netherlands | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Bokrantz, Jon | Chalmers University of Technology, Sweden | Regular session : Maintenance improvement and lifecycle management Presenter |
| BOLLE, Sébastien | Orange Labs, France | Digital twins based on systems engineering and semantic modeling |
| Bolsi, Beatrice | Department of Science and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy | Production Management in Food Supply Chains Presenter |
| Bonilla, Silvia Helena | Graduate Studies in Production Engineering, Universidade Paulista | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Boniotti, Giulia | Quantra S.r.l., Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Borges, Gislayne Vieira | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare Presenter |
| Börner, Frank | Technische Universität Chemnitz, Germany | Regular Session : Supply chain and routing management |
| Bosani, Enrica | Whirlpool EMEA | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Bostel, Nathalie | Universit´e de Nantes;
LS2N UMR CNRS 6004 | Finance-Driven Supply Chain |
| Botta-Genoulaz, Valérie | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Metaheuristics for production systems Presenter
Recent Advances in Sustainable Manufacturing Presenter |
| Bottani, Eleonora | Department of Engineering and Architecture, University of Parma, Italy;
Department of Engineering and Architecture, University of Parma – Parco Area delle Scienze 181/A, 43124, Parma (Italy) | Digital twins in companies first developments and future challenges
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter
Production Management in Food Supply Chains
Smart Methods and Techniques for Sustainable Supply Chain Management Presenter |
| BOUBAKER, Selmen | Capgemini Engineering, France | Regular session : Optimization of supply chain agility and reconfigurability Presenter |
| BOUHADDOU, Imane | ENSAM Meknes, Morocco | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Bouillot, Christian | University of Technology of Troyes, France | Hybrid Approaches for Production Planning and Scheduling |
| Bourguignon, Saulo Cabral | Universidade Federal Fluminense | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Bousdekis, Alexandros | Information Management Unit (IMU), Institute of Communication and Computer Systems (ICCS), National Technical University of Athens (NTUA), Greece | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 Presenter |
| Boutiche, Mohamed | USTHB, Algers, Algeria | Recent Advances in Sustainable Manufacturing |
| Bouzid, Mariam | Computer Laboratory and Digital Society (LIST3N), France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Brahimi, Nadjib | Rennes School of Business, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Brandenburg, Marcus | Chair of Supply Chain Management, University of Kassel, Germany;
School of Business, Flensburg University of Applied Sciences, Germany | Marco Garetti Doctoral Workshop Track 1 - Hettiarachchi Biman Darshana
Regular Session : Green production and circularity concepts |
| BRIAND, Cyril | LAAS CNRS, France | Regular session : Crossdock and transportation issues |
| Bril El-Haouzi, Hind | CRAN, France | Regular Session : Classification and data management methods |
| Brisou-Devendeville, Laure | Laboratoire MIS - Université de Picardie Jules Verne | Lean and Six Sigma in Services Healthcare |
| Broekaert, Jan Bart | SKEMA Business School, France | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions Presenter |
| Bruneliere, Hugo | IMT Atlantique, LS2N (UMR CNRS 6004), France | Low-Code and Model-Driven Engineering for Production System |
| Bruno, Giulia | Politecnico di Torino, Italy | Regular Session : Simulation and optimization of systems performances |
| Brunoe, Thomas Ditlev | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Brusset, Xavier | SKEMA Business School, France | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions Presenter |
| Bueno, Regis Cortez | Instituto Federal de Educação, Ciência e Tecnologia de São Paulo - Câmpus Suzano | Regular session : Crossdock and transportation issues |
| Bueno, Robson Elias | Graduate Studies in Production Engineering, Universidade Paulista | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Buscher, Udo | Technische Universität Dresden, Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Büyüközkan, Gülçin | Galatasaray University, Turkey | Regular Session : Risk and performance management of supply chains Presenter
Regular Session : Robotics and Human aspects Presenter |
| Caccamo, Chiara | Sintef Manufacturing, Norway | Digital Transformation Approaches in Production Management Presenter |
| CAILLARD, Simon | Laboratoire MIS - Université de Picardie Jules Verne | Lean and Six Sigma in Services Healthcare Presenter |
| Calado, Robisom Damasceno | Universidade Federal Fluminense;
Fluminense Federal University | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Canciglieri, Arthur Beltrame | PUCPR - Pontifical Catholic University of Paraná, Brazil | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Canciglieri Junior, Osiris | Industrial and Systems Engineering Graduate Program, Pontifical Catholic University of Parana, Curitiba, Brazil | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Cao, Yifan | Donghua University, China, People's Republic of | Data-driven methods for Supply Chain optimization Presenter |
| Capone, Christian | Kazakh-British Technical University, Kazakhstan | Regular session : Maintenance improvement and lifecycle management Presenter |
| Carrières, Vincent | Ecole Polytechnique de Montréal, Montréal, Canada;
Arts et Métiers, Paris, France | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Castanier, Bruno | Université d'Angers / LARIS EA7315 | Hybrid Approaches for Production Planning and Scheduling |
| Castro, Maria João | University of Minho, Portugal | The Future of Lean Thinking and Practice Presenter |
| Cauli, Nino | University of Cagliari, Italy | Digital twins based on systems engineering and semantic modeling |
| Cerqueus, Audrey | Mines Saint-Etienne, Univ Clermont Auvergne, CNRS, UMR 6158 LIMOS | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Chabanet, Sylvain | CRAN, France | Regular Session : Classification and data management methods Presenter |
| CHABLAT, Damien | Laboratoire des Sciences du Numérique de Nantes(LS2N), UMR CNRS 6004, Nantes, France;
Centre National de la Recherche Scientifique (CNRS) , France | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Chamani, Cheshmeh | Ghent University, Belgium;
Flanders Make, Belgium | Sustainability in Production Planning and Lot-Sizing Presenter |
| CHAOUNI BENABDELLAH, Abla | L2M3S, ENSAM, Moulay Ismail University, Meknes, Morocco;
ENSAM Meknes, Morocco | Smart and sustainable production and supply chains Presenter
Smart Methods and Techniques for Sustainable Supply Chain Management |
| Chari, Arpita | Chalmers University of Technology, Sweden | Smart and sustainable production and supply chains |
| Chaves, Sandra Maria do Amaral | Universidade Federal Fluminense | Lean and Six Sigma in Services Healthcare Presenter
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Chazelle, Valentin | CRAN, France | Regular Session : Classification and data management methods |
| Chehade, Hicham | University of Technology of Troyes, France | Hybrid Approaches for Production Planning and Scheduling |
| Cheikhrouhou, Naoufel | Geneva School of Business Administration, University of Applied Sciences Western Switzerland (HES-SO), Switzerland | Digital Transformations Towards Supply Chain Resiliency |
| Chen, Haoxun | Logistics and Optimization of Industrial Systems, University of Technology of Troyes, Troyes, France | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Chen, Hong | College of Electrical Engineering, Zhejiang University, Hangzhou 310027, Peoples Republic of China | The New Digital Lean Manufacturing Paradigm Presenter |
| CHEN, Mingyang | Business School, Henan University, China | Regular Session : Improvement models and methods for green and innovative systems |
| Chen, Xiaoxia | Chalmers University of Technology, Sweden | Smart and sustainable production and supply chains |
| Chen, Ying | Xi'an Jiaotong University, China, People's Republic of | Modern scheduling and applications in industry 4.0 Presenter |
| Cheng, Yongxi | Xi'an Jiaotong University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| CHERRAFI, Anass | ENSAM Meknes, Morocco | Smart Methods and Techniques for Sustainable Supply Chain Management |
| CHERRAFI, Anass | L2M3S, ENSAM, Moulay Ismail University, Meknes, Morocco | Smart and sustainable production and supply chains |
| Choi, Jonghwan | Sungkyunkwan University, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability Presenter |
| Chou, Xiaochen | Dalle Molle Institute for Artificial Intelligence, Switzerland;
University of Modena and Reggio Emilia, Italy | Production Management in Food Supply Chains |
| Christensen, Bjørn | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Chu, Chengbin | Laboratoire d’Informatique Gaspard-Monge (LIGM), UMR 8049, Univ Gustave Eiffel, ESIEE Paris, 93162 Noisy-le-Grand Cedex, France | Modern scheduling and applications in industry 4.0
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus |
| Chu, Chengbin | ESIEE Paris, Universite Paris-Est, 93162 Noisy-le-Grand, France | Supply Chain Risk Management under Coronavirus |
| Chu, Chengbin | Laboratoire d’Informatique Gaspard-Monge (LIGM), UMR 8049, Univ Gustave Eiffel, ESIEE Paris, 93162 Noisy-le-Grand Cedex, France | Modern scheduling and applications in industry 4.0 |
| Chu, Feng | IBISC, Univ Évry, University of Paris-Saclay, Évry, France | Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus |
| Ciarapica, Filippo Emanuele | Università Politecnica delle Marche, Italy | Regular session : Maintenance improvement and lifecycle management |
| Cimini, Chiara | University of Bergamo, Italy | The Future of Lean Thinking and Practice Presenter |
| Ciric, Danijela | University of Novi Sad, Faculty of Technical Sciences, Serbia | Regular session : Additive Manufacturing and mass customization |
| CLIVILLE, Vincent | LISTIC Université Savoie Mont Blanc, France | Regular session : Maintenance improvement and lifecycle management |
| Cocca, Paola | University of Brescia, Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly Presenter |
| Coelho, Leandro dos Santos | Industrial and Systems Engineering Graduate Program, Pontifical Catholic University of Parana, Curitiba, Brazil;
Department of Electrical Engineering, Federal University of Parana, Polytechnic Center, Curitiba, Brazil | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Coelho, Pedro Miguel Fernandes | Univ Coimbra, CEMMPRE, Department of Mechanical Engineering | Metaheuristics for production systems Presenter |
| Coelho, Sara Avelar | Universidade Federal Fluminense | Lean and Six Sigma in Services Healthcare |
| Colapinto, Cinzia | Department of Management, Ca' Foscari University of Venice, Italy | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Colombo, Beatrice | University of Bergamo, Italy | Marco Garetti Doctoral Workshop Track 2 - Colombo Beatrice
Regular Session : Green production and circularity concepts Presenter |
| COMPERAT, Jean-Robert | IREGE Université Savoie Mont Blanc, France | Regular session : Maintenance improvement and lifecycle management |
| Consenza, Harvey José Santos Ribeiro | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare |
| Correia, Paula Ferreira da Cruz | RESUP- Research Group in Supply Chain Management - Postgraduate Program in Production Engineering, Universidade Paulista, São Paulo, Brazil | Production Management in Food Supply Chains Presenter |
| CORTES-CORNAX, Mario | Univ. Grenoble Alpes, CNRS, Grenoble INP, LIG, France | Regular Session : Risk and performance management of supply chains |
| Cosenza, Harvey José Santos Ribeiro | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare |
| Costa, Federica | Politecnico di Milano, Italy | Regular session : Maintenance improvement and lifecycle management |
| Costa, Helder Gomes | Fluminense Federal University, Niterói, Rio de Janeiro, Brazil. | Lean and Six Sigma in Services Healthcare |
| Costa, Jaqueline Severino da | Agroindustrial Management Department, Universidade Federal de Lavras | Production Management in Food Supply Chains |
| Costa, Rui Pedro | Department of Production and Systems, School of engineering, University of Minho, Portugal | Regular session : Maintenance improvement and lifecycle management |
| Cottyn, Johannes | Ghent University, Belgium;
Industrial Systems Engineering (ISyE), Flanders Make, Belgium | Regular session : Improvement of design and operation of manufacturing systems |
| COUPAYE, Thierry | Orange Labs, France | Digital twins based on systems engineering and semantic modeling |
| Cui, Gaosheng | Shanxi Aerospace Tsinghua Equipment Co., Ltd., P. R. China | System Identification for Manufacturing Control Applications |
| Cung, Van-Dat | G-SCOP, France | Regular session : Crossdock and transportation issues
Regular Session : Risk and performance management of supply chains |
| da Rocha, Hevelyn dos Santos | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare |
| da Rocha, Tainá | Industrial and Systems Engineering Graduate Program, Pontifical Catholic University of Parana, Curitiba, Brazil;
Robert Bosch, Ind. Plant - Curitiba, Brazil | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| da Silva, Marcia Terra | Paulista University, Brazil | Regular Session : Robotics and Human aspects
The New Digital Lean Manufacturing Paradigm |
| Dahl, Håkon | SINTEF Manufacturing, Norway | Digital twins in companies first developments and future challenges |
| Dahlberg, Tomi | University of Turku | Blockchain in the Operations and Supply Chain Management |
| DAHMANI, Abdelhak | Aix Marseille University, University of Toulon, CNRS, LIS, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Dahmani, Sarra | SKEMA Business School, Université Côte d’Azur, Paris, France | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Dallery, Yves | Industrial Engineering Laboratory, Centralesupelec, University of Paris Saclay, France | Finance-Driven Supply Chain |
| Dan'Asabe, Godwin Geyi | University of Central Lancashire, United Kingdom | Regular Session : Risk and performance management of supply chains |
| Dandutse, Tanimu | University of Central Lancashire, United Kingdom | Regular Session : Risk and performance management of supply chains |
| DANTAN, Jean-yves | LCFC laboratory, Art et Métier Paristech, France | Regular session : Improvement of design and operation of manufacturing systems |
| Darras, Sylvain | Evolucare Technologies, France | Lean and Six Sigma in Services Healthcare |
| Davari, Morteza | SKEMA Business School, France | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| De Carolis, Anna | Politecnico di Milano, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| De Cock, Alexander | CodesignS, Flanders Make vzw,Belgium | Regular session : Improvement of design and operation of manufacturing systems |
| de Lara, Juan | Universidad Autónoma de Madrid, Spain | Low-Code and Model-Driven Engineering for Production System |
| de Lima, Luiz Antonio | Paulista University, Brazil | Regular Session : Robotics and Human aspects |
| De Marco, Chiara Eleonora | ciaotech | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| de Oliveira, Aline Rangel | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare |
| de Souza, Jonatas Santos | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains |
| de Souza, Nilson Amado | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains |
| Deitermann, Ferdinand | University of St. Gallen, Switzerland | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Del Monte, Claudia | Università degli Studi di Bergamo, Italy | The Future of Lean Thinking and Practice |
| Delmastro, Tiziana | LINKS FOUNDATION - Leading Innovation & Knowledge for Society, via Pier Carlo Boggio 61, 10138 Torino, Italy | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Delorme, Xavier | Mines Saint-Etienne, Univ Clermont Auvergne, CNRS, UMR 6158 LIMOS | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Deniaud, Ioana | Beta, CNRS UMR 7522, University of Strasbourg, Strasbourg, France | Regular Session : Risk and performance management of supply chains Presenter |
| Denno, Peter | National Institute of Standards and Technology, USA | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Despeisse, Mélanie | Chalmers University of Technology, Sweden | Smart and sustainable production and supply chains Presenter |
| Deuse, Jochen | Technische Universität Dortmund, Germany;
University of Technology Sydney, Australia | The Future of Lean Thinking and Practice |
| Devendeville, Laure | MIS Laboratory, France | Lean and Six Sigma in Services Healthcare |
| Dhanapal, Vignesh | Virginia Tech, Blacksburg, Virginia, United States of America | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Di Martinelly, Christine | IESEG School of Management;
LEM-CNRS (UMR 9221) | Regular session : New approaches for routing problem solving Presenter |
| Di Ruscio, Davide | University of L'Aquila, Italy | Low-Code and Model-Driven Engineering for Production System
Low-Code and Model-Driven Engineering for Production System |
| Dimitris, Kiritsis | EPFL SCI-STI-DK, Station 9, CH-1015 Lausanne, Switzerland | Digital twins based on systems engineering and semantic modeling |
| Ding, Jie | Beijing Institute of Technology, People's Republic of China | Digital twins based on systems engineering and semantic modeling |
| Ding, Linshan | Huazhong University of Science and Technology, Wuhan, China | Regular session : Optimization of production and transportation systems Presenter |
| Ding, Tong | School of Mechanical Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, China | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Ding, Yueyu | Urban Mobility Institute, Tongji University, Shanghai, China | Modern scheduling and applications in industry 4.0 |
| Ditlev Brunoe, Thomas | Aalborg University, Denmark | Marco Garetti Doctoral Workshop Track 1 - Mantravadi Soujanya
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| DOLATINEGHABADI, Parisa | Capgemini Engineering, France | Regular session : Optimization of supply chain agility and reconfigurability |
| Dolgui, Alexandre | IMT Atlantique, France;
IMT Atlantique, LS2N-CNRS, La Chantrerie, 4 Rue Alfred Kastler, 44307 Nantes, France;
IMT Atlantique, LS2N-CNRS, Nantes, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing
Data-driven methods for Supply Chain optimization
Learning and Robust Decision Support Systems for Agile Manufacturing environments
Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems
Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter
Sustainability in Production Planning and Lot-Sizing |
| dos Santos, Helton Almeida | Graduate Studies in Production Engineering, Universidade Paulista | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 Presenter |
| DOS SANTOS, NILZA APARECIDA | UNIVERSIDADE PAULISTA UNIP, Brazil;
FATEC COTIA, Sao Paulo, Brazil | The New Digital Lean Manufacturing Paradigm |
| Dotti, Stefano | University of Bergamo, Italy | Regular Session : Green production and circularity concepts |
| Dou, Runliang | School of Management, Tianjin University, Tianjin 300072, China | Smart and sustainable production and supply chains Presenter |
| Dransfeld, Sebastian | SINTEF Manufacturing, Norway | Digital twins in companies first developments and future challenges |
| Drei, Samuel Martins | Fluminense Federal University | Lean and Six Sigma in Services Healthcare Presenter |
| Drexel, Damian | FH Vorarlberg, Austria | Regular session : Optimization of supply chain agility and reconfigurability |
| Dreyer, Heidi | Norwegian University of Science and Technology (NTNU), Norway | The Future of Lean Thinking and Practice Presenter |
| Dridi, Mahjoub | Nanomedicine Lab, Univ. Bourgogne Franche-Comté, UTBM, France | Regular session : New approaches for routing problem solving |
| Duarte, Gilson Tristão | Paulista University-Graduate Program in Production Engineering, Brazil | Production Management in Food Supply Chains |
| Dubovitskay, Alevtina | Lucerne University of Applied Sciences and Arts, Switzerland | Blockchain in the Operations and Supply Chain Management |
| Ducq, Yves | University of Bordeaux, France | Regular session : Additive Manufacturing and mass customization |
| Dümmel, Johannes | Karlsruhe Institute of Technology (KIT), Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly Presenter |
| DUMONDELLE, Samuel | Capgemini Engineering, France | Regular session : Optimization of supply chain agility and reconfigurability |
| DUTTA, GOUTAM | Indian Institute of Management , Ahmedabad, India | Digital Transformations Towards Supply Chain Resiliency |
| EDOUARD, Aurélie | ENSAM, France | Marco Garetti Doctoral Workshop Track 2 - Edouard Aurélie |
| Eghbali-Zarch, Maryam | University of Tehran, Iran, Islamic Republic of | Lean and Six Sigma in Services Healthcare |
| Ekwaro-Osire, Henry | BIBA - Bremer Institut für Produktion und Logistik | Data-based services as key enablers for Smart Products, Manufacturing and Assembly Presenter
Marco Garetti Doctoral Workshop Track 2 - Ekwaro-Osire Henry |
| El Abdellaoui, Salma | OMP France | Metaheuristics for production systems |
| EL FIRDOUSSI, SELWA | EMINES, Mohammed VI Polytechnique University | Regular session : Improvement of design and operation of manufacturing systems |
| El Hilali Alaoui, Ahmed | Euromed University 32 Rue Meknes, Fez, Morocco | Lean and Six Sigma in Services Healthcare |
| EL MHAMEDI, Abderrahman | PARIS8, France | Regular session : New approaches for routing problem solving |
| El Ouadghiri, Moulay Driss | Moulay Ismail University, IA Laboratory, Meknes, Morocco | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Eleftheriadis, Ragnhild | Sintef Manufacturing, Norway | Digital Transformation Approaches in Production Management |
| Elfirdoussi, Selwa | EMINES School of Industrial Management, Université Mohammed VI Polytechnique, Maroc | Modern scheduling and applications in industry 4.0 |
| ELİGÜZEL, İbrahim Miraç | Gaziantep University, Turkey | Regular Session : Classification and data management methods Presenter
Regular session : New approaches for routing problem solving Presenter |
| Elpashev, Denis | V.A.Trapeznikov Institute of Control Sciences of Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications |
| Emmanouilidis, Christos | University of Groningen, Netherlands | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Ermolova, Maria | Trapeznikov Institute of Control Sciences, Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications |
| Eslami, Yasamin | Université de Lorraine, CNRS, CRAN, Nancy, France | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Espinouse, Marie-Laure | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France | Sustainability in Production Planning and Lot-Sizing |
| ESTENDER, ANTONIO CARLOS | UNIVERSIDADE PAULISTA UNIP, Brazil | The New Digital Lean Manufacturing Paradigm |
| ETIENNE, Alain | LCFC, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| F. Giskeødegård, Marte | NTNU, Norway | Operations Management in Engineer-to-Order Manufacturing |
| FABRY, Quentin | LAAS CNRS, France | Regular session : Crossdock and transportation issues |
| Farias Filho, José Rodrigues | Fluminense Federal University, Niterói, Rio de Janeiro, Brazil. | Lean and Six Sigma in Services Healthcare |
| Farias Filho, José Rodrigues de | Fluminense Federal University | Lean and Six Sigma in Services Healthcare |
| Feng, Xuehao | Ocean College, Zhejiang University, P.R.China | Regular session : Crossdock and transportation issues |
| FENIES, PIERRE | EMINES, Mohammed VI Polytechnique University;
Pantheon-Assas, Paris II University | Regular session : Improvement of design and operation of manufacturing systems |
| Fera, Marcello | University of Campania Luigi Vanvitelli, Italy | Digital Transformations Towards Supply Chain Resiliency |
| Fertsch, Marek | Poznan University of Technology, Poland | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Fertsch, Michał | Poznan University of Technology, Poland | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Feyzioğlu, Orhan | Galatasaray University, Turkey | Regular Session : Robotics and Human aspects
Regular Session : Risk and performance management of supply chains |
| Finco, Serena | Department of Management and Engineering, University of Padova, Italy | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Fischer, Jan | Siemens AG, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Flores-Garcia, Erik | KTH Royal Institute of Technology, Sweden | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Flores-García, Erik | KTH Royal Institute of Technology, Sweden | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability Presenter |
| FOLZ, Pauline | Orange Labs, France | Digital twins based on systems engineering and semantic modeling |
| Fontes, Dalila B.M.M. | LIAAD- INESCTEC, Porto, Portugal;
Faculdade de Economia, Universidade do Porto, Porto, Portugal | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Forget, Pascal | Université du Québec à Trois-Rivières, Canada | Regular Session : Simulation and optimization of systems performances |
| FORMENTINI, Marco | DISI, University of Trento, Italy | Production Management in Food Supply Chains Presenter |
| Fornasiero, Rosanna | CNR, Italy;
CNR-IEIIT, Italy | Regular Session : AI-based approaches for quality and performance improvement of production systems Presenter
Smart Supply Chain and Production in Society 5.0 Era |
| Fortuna, Blaž | Jožef Stefan Institute, Slovenia;
Qlector d.o.o., Slovenia | Digital twins based on systems engineering and semantic modeling
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Foussard, Ernest | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France;
Univ. Grenoble Alpes, Inria, CNRS, Grenoble INP, LIG, 38000 Grenoble, France | Sustainability in Production Planning and Lot-Sizing Presenter |
| Fragapane, Giuseppe | Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway | Autonomous Robots in Delivery Logistics Presenter |
| Franchi, Beatrice | Department of Engineering and Architecture, University of Parma, Parma, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Franciosi, Chiara | University of Salerno, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Frank, Jana | FIR an der RWTH Aachen, Germany | Regular Session : Simulation and optimization of systems performances |
| Franke, Susanne | Department of Factory Planning and Factory Management, Chemnitz University of Technology, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Franzini, Alberto | Politecnico di Milano, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Frauenberger, Dirk | ETH Zurich, Switzerland | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Frein, Yannick | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France | Regular session : Crossdock and transportation issues |
| Freire, Joana | Universidade Federal do Rio de Janeiro, Brazil | Lean and Six Sigma in Services Healthcare Presenter |
| Freitag, Mike | Fraunhofer IAO, Germany | Regular session : Frameworks and conceptual modelling for systems and services efficiency Presenter |
| Freitas, Inês | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Fridtun Brenden, Stine | Norwegian University of Science and Technology (NTNU), Department of Mechanical and Industrial Engineering | Digital Transformation of SME Manufacturers: The Crucial Role of Standard Presenter |
| Friedewald, Axel | Hamburg University of Technology (TUHH), Germany | Digital Transformation Approaches in Production Management |
| Friedli, Thomas | University of St. Gallen, Switzerland | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| FRONT, Agnès | Univ. Grenoble Alpes, CNRS, Grenoble INP, LIG, France | Regular Session : Risk and performance management of supply chains |
| Fujii, Nobutada | Kobe University, Japan | Smart Supply Chain and Production in Society 5.0 Era |
| Fujii, Nobutada | Kobe Universtiy, Japan;
Kobe University, Japan;
Graduate School of System Informatics, Kobe University | Gastronomic Service System Design
Gastronomic Service System Design
Smart Supply Chain and Production in Society 5.0 Era
Smart Supply Chain and Production in Society 5.0 Era |
| Gadeyne, Klaas | Flanders Make, Belgium | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Gagnon, Léo | Université du Québec à Trois-Rivières, Canada | Regular Session : Simulation and optimization of systems performances |
| Gaiardelli, Paolo | University of Bergamo, Viale Marconi, 5, 24044 Dalmine, BG, Italy;
University of Bergamo, Italy | Engineering of Smart-Product-Service-Systems of the Future
Regular Session : Green production and circularity concepts
The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice |
| Galli, Matteo | University of Parma, Italy | Serious Games Analytics: Improving Games and Learning Support |
| gallo, mosè | Università degli studi di Napoli Federico II, Italy | Modern scheduling and applications in industry 4.0 |
| Ganesan, Viswanath Kumar | Tata Consultancy Services, Chennai, India | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Garel, benjamin | CHU de Martinique | Lean and Six Sigma in Services Healthcare |
| Garrido, Manuel | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Gauthier, François | Université du Québec à Trois-Rivières, Canada (QC) | Regular session : Maintenance improvement and lifecycle management |
| Gayialis, Sotiris P. | National Technical University of Athens, Greece | Blockchain in the Operations and Supply Chain Management |
| Genta, Gianfranco | Department of Management and Production Engineering, Politecnico di Torino, Italy | Regular Session : Supply chain and routing management Presenter |
| Gérard, Olivier | MIS Laboratory, France;
Evolucare Technologies, France | Lean and Six Sigma in Services Healthcare Presenter |
| Ghasemi, Shirin | University of Tehran, Iran, Islamic Republic of | Autonomous Robots in Delivery Logistics |
| Giannetsos, Thanassis | Ubitech Ltd, Digital Security & Trusted Computing Group, Greece | Digital twins based on systems engineering and semantic modeling |
| Gicquel, Céline | Université Paris Saclay, LRI, 91190 Gif-sur-Yvette, France | Sustainability in Production Planning and Lot-Sizing |
| Gildseth, Arne | Blueday Technology AS, Norway | Operations Management in Engineer-to-Order Manufacturing |
| Gíslason, Þorgeir Páll | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Recent Advances in Sustainable Manufacturing |
| Gkournelos, Christos | LMS-University of Patras, Greece | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Gonçalves, Margarida | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Gong, Yeming | EMLYON Business School, 23 avenue Guy de Collongue, 69134 Ecully cedex, France | Regular Session : Simulation and optimization of systems performances
Smart and sustainable production and supply chains |
| GONG, Yeming | EMLYON Businees school, France | Regular Session : Improvement models and methods for green and innovative systems |
| González Chávez, Clarissa Alejandra | Chalmers University of Technology, Sweden | Smart and sustainable production and supply chains |
| Görzig, David | Fraunhofer IPA, Germany | Regular session : Frameworks and conceptual modelling for systems and services efficiency Presenter |
| Goswami, Adrijit | Indian Institute of Technology Kharagpur | Digital Transformations Towards Supply Chain Resiliency
Digital Transformations Towards Supply Chain Resiliency |
| Granin, Sergey | Moscow Institute of Physics and Technology, Russian Federation | System Identification for Manufacturing Control Applications
System Identification for Manufacturing Control Applications |
| Gras, Camille | G-SCOP, France;
Probayes, France | Regular session : Crossdock and transportation issues Presenter |
| Grassi, Andrea | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0.
Modern scheduling and applications in industry 4.0 |
| Grebenyuk, Elena | Institute of control sciences RAS, Russian Federation | System Identification for Manufacturing Control Applications |
| Gregoire, Laurent | Industrial Engineering Laboratory, Centralesupelec, University of Paris Saclay, France | Finance-Driven Supply Chain |
| Greis, Noel | North Carolina State University, United States of America | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Gróf, Clemens | ETH Zurich, Switzerland | Engineering of Smart-Product-Service-Systems of the Future Presenter
Marco Garetti Doctoral Workshop Track 2 - Clemens Grof |
| Grunder, Olivier | Nanomedicine Lab, Univ. Bourgogne Franche-Comté, UTBM, France | Regular session : New approaches for routing problem solving |
| Guan, Zailin | Huazhong University of Science and Technology, Wuhan, China | Regular session : Optimization of production and transportation systems
Regular Session : Simulation and optimization of systems performances |
| Guchhait, Rekha | Yonsei University | Regular Session : Improvement models and methods for green and innovative systems |
| Guizzi, Guido | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0.
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Guo, Daqiang | epartment of Industrial and Manufacturing Systems Engineering, HKU-ZIRI Lab for Physical Internet, The University of Hong Kong, Hong Kong S.A.R. (China);
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Guo, Mengpeng | Beijing Shuguang Aviation Electric Co., Ltd., P. R. China | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Gupta, Amit Kumar | Management Development Institute Gurgaon, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| GUPTA, NARAIN | Management Development Institute | Digital Transformations Towards Supply Chain Resiliency
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Gürke, Niels | thyssenkrupp Presta Schönebeck GmbH | Regular Session : Simulation and optimization of systems performances |
| Guschinsky, Nikolai | National Academy of Science, Belarus | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Gützlaff, Andreas | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems |
| HADDOU BENDERBAL, HICHEM | IMT Atlantique, LS2N-CNRS, Nantes, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| HADJ TAIEB, Salma | FSEGS, Tunisia | Regular session : New approaches for routing problem solving Presenter |
| Hadj-Hamou, Khaled | Univ. Lyon, INSA Lyon, DISP, 69621 Villeurbanne, France | Finance-Driven Supply Chain |
| Haeussler, Stefan | University of Innsbruck, Austria | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Hajjem, Emna | University of Picardie Jules Verne, 48 Rue d’Ostende, 02100 Saint-Quentin, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Hallikas, Jukka | LUT University, Finland | Blockchain in the Operations and Supply Chain Management |
| Hamani, Nadia | University of Picardie Jules Verne, 48 Rue d’Ostende, 02100 Saint-Quentin, France;
Université de Picardie Jules Verne, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System
Regular session : Optimization of supply chain agility and reconfigurability |
| Hamid, Mahdi | University of Tehran, Iran, Islamic Republic of | Autonomous Robots in Delivery Logistics |
| Hammami, Ramzi | Rennes School of Business, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Hämmerle, Oliver | Universität Stuttgart | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| HANI, Yasmina | PARIS8, France | Regular session : New approaches for routing problem solving |
| Haniff, Amos P | Edinburgh Business School, Heriot-Watt University | Recent Advances in Sustainable Manufacturing |
| Hansuwa, Sweety | Department of Management Studies, Indian Institute of Technology Madras, Chennai, India;
Tata Consultancy Services, Chennai, India | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 Presenter |
| Hanzálek, Zdeněk | Industrial Informatics Department, Czech Institute of Informatics Robotics and Cybernetics, Czech Technical University in Prague, Prague, Czech Republic | Hybrid Approaches for Production Planning and Scheduling |
| Hanzalek, Zdenek | Industrial Informatics Department, Czech Institute of Informatics Robotics and Cybernetics, Czech Technical University in Prague, Czech Republic | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Harada, Kenichi | TMES Corporation | Gastronomic Service System Design |
| Harrat, Mourad | Ecole Centrale de Nantes, France | Engineering of Smart-Product-Service-Systems of the Future Presenter |
| Harrison, David | Glasgow Caledonian University, United Kingdom | Digital Transformation Approaches in Production Management |
| Haslund Løgtved, Janus | Aalborg University, Denmark | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Havle, Celal Alpay | Galatasaray University, Turkey;
Özyeğin University, Turkey | Regular Session : Risk and performance management of supply chains |
| He, Yumin | Beihang University, P. R. China | Learning and Robust Decision Support Systems for Agile Manufacturing environments
New trends and challenges in Reconfigurable, Flexible or Agile Production System
System Identification for Manufacturing Control Applications
System Identification for Manufacturing Control Applications |
| HEDAYATINIA, Pooya | Universite de Rennes 1-IGR-IAE | Finance-Driven Supply Chain |
| Heinicke, Matthias | Targus Management Consulting AG, Germany | Regular session : Improvement of design and operation of manufacturing systems |
| Hennequin, Sophie | LGIPM, University of Lorraine, Metz, France | Regular Session : Supply chain and routing management |
| Henriksen, Bjørnar | SINTEF, Norway | Regular Session : Improvement models and methods for green and innovative systems |
| Henriksen-Polanscak, Espen | HTS Dynamics, Norway | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Herold Jeberg, Malte | Aalborg University, Denmark | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Herr, Nathalie | Probayes, France | Regular session : Crossdock and transportation issues |
| Hettiarachchi, Biman Darshana | Chair of Supply Chain Management, University of Kassel, Germany | Marco Garetti Doctoral Workshop Track 1 - Hettiarachchi Biman Darshana
Regular Session : Green production and circularity concepts Presenter |
| Heuchenne, Cédric | HEC Management School, University of Liège, Liège 4000, Belgium;
Institute of Artificial Intelligence and Data Science, Dong A University, Da Nang, Vietnam | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Himmiche, Sara | Université de Lorraine, CNRS, CRAN | Hybrid Approaches for Production Planning and Scheduling |
| Hoch, Ralph | FH Vorarlberg, Austria | Regular session : Optimization of supply chain agility and reconfigurability |
| Hof, Lucas A. | École de Technologie Supérieure, Canada | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Holst, Lennard | Institute for Industrial Management (FIR) at RWTH Aachen University, Germany | Engineering of Smart-Product-Service-Systems of the Future |
| Homayouni, S. Mahdi | LIAAD- INESCTEC, Porto, Portugal | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems Presenter |
| HOMRI, Lazhar | LCFC laboratory, Art et Métier Paristech, France | Regular session : Improvement of design and operation of manufacturing systems |
| Hong, Juntaek | Pohang University of Science and Technology, Korea, Republic of (South Korea) | Hybrid Approaches for Production Planning and Scheduling Presenter |
| Hörmann, Korbinian | Siemens AG, Germany | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Hosseinzadeh, Meysam | University of Tehran, Iran, Islamic Republic of | Autonomous Robots in Delivery Logistics |
| Hovelaque, Vincent | IGR-IAE of Rennes, University of Rennes 1;
CREM UMR CNRS 6211 | Finance-Driven Supply Chain |
| Howe, Graham | University of Wales, Trinity St. David, Wales | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Hribernik, Karl | BIBA - Bremer Institut für Produktion und Logistik GmbH | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Hrnjica, Bahrudin | University of Bihac, Bosnia and Herzegovina;
University of Bihać, Faculty of Technical Sciences, Bosnia and Herzegovina | Digital Transformation Approaches in Production Management
Digital Transformation Approaches in Production Management |
| Hssini, Imane | Louvain School of Management, Lourim | Regular session : New approaches for routing problem solving |
| Hsu, Tiente | Univ. Artois, UR 3926, Laboratoire de Genie Informatique et d'Automatique de l'Artois (LGI2A), 62400 Bethune, France | Regular Session : Improvement models and methods for green and innovative systems |
| Hu, Hanhui | Southeast University, China, People's Republic of | Smart and sustainable production and supply chains |
| Hu, Zixiang | China Electronic Technology Group Corporation No.38 Research Institute, People's Republic of China | Digital twins based on systems engineering and semantic modeling |
| Huang, George Q. | epartment of Industrial and Manufacturing Systems Engineering, HKU-ZIRI Lab for Physical Internet, The University of Hong Kong, Hong Kong S.A.R. (China) | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Hübl, Alexander | University of Groningen, Netherlands | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Hummelshøj Sloth, Simon | Aalborg University, Denmark | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Hvolby, Hans-Henrik | Norwegian University of Science and Technology (NTNU), Trondheim, Norway;
Aalborg University, Aalborg, Denmark | Operations Management in Engineer-to-Order Manufacturing
Smart Methods and Techniques for Sustainable Supply Chain Management Presenter |
| Igelmo Garcia, Víctor | University of Skövde, Sweden | Smart and sustainable production and supply chains |
| Ignácio, Paulo Sérgio de Arruda | School of Applied Sciences, Campinas State University | Lean and Six Sigma in Services Healthcare |
| Ignaciuk, Przemyslaw | Lodz University of Technology, Poland | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Ilıcak, Öykü | Galatasaray University, Turkey | Regular Session : Robotics and Human aspects |
| Ille, Fabian | Lucerne University of Applied Sciences and Arts, Switzerland | Engineering of Smart-Product-Service-Systems of the Future |
| Indamutsa, Arsene | University of L'Aquila, Italy | Low-Code and Model-Driven Engineering for Production System Presenter |
| Iori, Manuel | Department of Science and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy | Production Management in Food Supply Chains
Production Management in Food Supply Chains |
| Irie, Kyohei | Kobe Universtiy, Japan | Gastronomic Service System Design |
| Ito, Asumi | Kobe University, Japan | Smart Supply Chain and Production in Society 5.0 Era Presenter |
| Iung, Benoit | Université de Lorraine, CNRS, CRAN, France | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Jacques, Lamothe | IMT Mines Albi-Carmaux | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Jamiri, Atefeh | INSA Lyon- LIRIS Laboratory, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Jamwal, Anbesh | Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur (Rajasthan) INDIA - 302017, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Januszek, Sven | ETH Zürich, Switzerland | Blockchain in the Operations and Supply Chain Management |
| Järnefelt, Vafa | VTT Technical Research Centre of Finland, Espoo | Regular Session : Green production and circularity concepts |
| Jarrar, Qussay | Ecole Central de Nantes, Laboratory of digital Sciences of Nantes, ECN-LS2N-UMR 6004 | Regular session : Additive Manufacturing and mass customization Presenter |
| Järvihaavisto, Ulriikka | Aalto University, Finland | Serious Games Analytics: Improving Games and Learning Support |
| Jasiulewicz – Kaczmarek, Małgorzata | Poznan University of Technology, Poland | Lean and Six Sigma in Services Healthcare |
| Jasiulewicz-Kaczmarek, Małgorzata | Poznan University of Technology, Poland | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Jebali, Aïda | SKEMA Business School, Université Côte d’Azur, Paris, France | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Jemai, Zied | LR-OASIS, National Engineering School of Tunis, University of Tunis El Manar, Tunis, Tunisia;
ENIT, Tunisia;
Centralesupelec, University Paris Saclay, France;
Université Paris-Saclay, CentraleSupélec, Laboratoire Genie Industriel, 3 rue Joliot-Curie 91190 Gif-sur-Yvette, France | Finance-Driven Supply Chain
Regular Session : Advanced modelling approaches
Regular session : Maintenance improvement and lifecycle management
Regular session : Optimization of supply chain agility and reconfigurability |
| Jeong, Ho Young | Purdue University, United States of America | Autonomous Robots in Delivery Logistics Presenter
Autonomous Robots in Delivery Logistics |
| Jeong, Yongkuk | KTH Royal Institute of Technology, Sweden | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Jiang, Li | Glorious Sun School of Business and Management, Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| Jiang, Yuze | School of Mechanical Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, China | Robotics Technologies for Control, Smart Manufacturing and Logistics Presenter |
| Jin, Yili | Beijing Institute of Technology, China, People's Republic of | Digital twins based on systems engineering and semantic modeling |
| Jlassi, Jihene | Laboratoire QUARTA/MGSI IUT de Montreuil | Supply Chain Risk Management under Coronavirus |
| Jlassi, Jihene | Laboratoire OLID Sfax Tunisia | Supply Chain Risk Management under Coronavirus |
| Jlassi, Jihene | ISGI Sfax, Tunisia | Supply Chain Risk Management under Coronavirus |
| Joe, Yu La | Yura, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Johansson, Björn | Chalmers University of Technology, Sweden | Smart and sustainable production and supply chains
The Future of Lean Thinking and Practice |
| Joldić, Adil | “Dzemal Bijedic” University, Faculty of Information Technologies, Bosnia and Herzegovina | Digital Transformation Approaches in Production Management Presenter |
| Jouini, Oualid | CentraleSupelec, France | Regular Session : Advanced modelling approaches |
| Jung, Kiwook | North Volt, Skellefteå, Sweden | Recent Advances in Sustainable Manufacturing |
| Junior, Osiris | PUCPR - Pontifical Catholic University of Paraná, Brazil | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Kaihara, Toshiya | Kobe Universtiy, Japan;
Graduate School of System Informatics, Kobe University;
Kobe University, Japan | Gastronomic Service System Design
Smart Supply Chain and Production in Society 5.0 Era
Smart Supply Chain and Production in Society 5.0 Era
Smart Supply Chain and Production in Society 5.0 Era |
| Kalai, Rim | LR-OASIS, National Engineering School of Tunis,University of Tunis El Manar, Tunis, Tunisia | Regular session : Optimization of supply chain agility and reconfigurability |
| Kalaiarasan, Ravi | Department of Sustainable Production Development, KTH Royal Institute of Technology, Södertälje, Sweden;
KTH Royal Institute of Technology, 15136 Södertälje , Sweden | Data-driven methods for Supply Chain optimization
Digital Transformations Towards Supply Chain Resiliency |
| Kamatani, Kaoru | Ritsumeikan University, Japan | Gastronomic Service System Design |
| Kanbara, Rika | Osaka Prefecture University, Japan | Smart Supply Chain and Production in Society 5.0 Era |
| Kang, Jeong Tae | Yura, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Kang, Yong-Shin | Advanced Institutes of Convergence Technology, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Kassem, Bassel | Politecnico Di Milano, Italy | The New Digital Lean Manufacturing Paradigm Presenter |
| Katiraee, Niloofar | Department of Management and Engineering, University of Padova, Italy | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Kechagias, Evripidis P. | National Technical University of Athens, Greece | Blockchain in the Operations and Supply Chain Management |
| Kedad-Sidhoum, Safia | Conservatoire National des Arts et Métiers, CEDRIC, 75003 Paris, France | Sustainability in Production Planning and Lot-Sizing |
| Keepers, Makenzie | West Virginia University, USA | Digital Transformation of SME Manufacturers: The Crucial Role of Standard Presenter |
| Kefalakis, Nikos | INTRASOFT International, Luxembourg | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Keiser, Yann | School of Computer Science and Information Technology, Lucerne University of Applied Sciences and Arts, Rotkreuz, Switzerland | The New Digital Lean Manufacturing Paradigm |
| Kenda, Klemen | Jožef Stefan International Postgraduate School, Slovenia;
Jožef Stefan Institute, Slovenia;
Qlector d.o.o., Slovenia | Digital twins based on systems engineering and semantic modeling
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Kenné, Jean-Pierre | École de Technologie Supérieure, Canada | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| KERMAD, Lyes | Université de Paris 8, France | Regular session : Optimization of supply chain agility and reconfigurability |
| Kharraja, Said | University of Lyon, UJM-Saint-Etienne, LASPI, Roanne, France | Lean and Six Sigma in Services Healthcare |
| Khatab, Abdelhakim | Lorraine University, France | Sustainability in Production Planning and Lot-Sizing |
| Khettabi, Imen | USTHB, Algers, Algeria | Recent Advances in Sustainable Manufacturing Presenter |
| Khobotov, Evgeniy | Trapeznikov Institute of Control Sciences, Russian Academy of Sciences, Russian Federation;
Bauman Moscow State Technical University, Russian Federation | System Identification for Manufacturing Control Applications Presenter |
| Kiebler, Lorenz | IML Fraunhofer | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Kim, Duck Young | Pohang University of Science and Technology, Korea, Republic of (South Korea) | System Identification for Manufacturing Control Applications |
| Kim, Goo-Young | Sungkyunkwan University, South Korea | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability Presenter |
| Kim, Hyun-Jung | KAIST, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Kim, Hyung Sun | DEXTA Inc., Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| KIM, JUNGMIN | Department of Industrial Engineering, Seoul National University, Seoul, Korea | Regular Session : Supply chain and routing management |
| Kim, Woong | Department of Industrial Management Engineering, Korea University, Korea, Republic of (South Korea) | Regular Session : Classification and data management methods Presenter |
| Kim, Yonggab | Purdue University, United States of America | Autonomous Robots in Delivery Logistics Presenter |
| Kinra, Aseem | Universität Bremen, Germany | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Kiritsis, Dimitris | EPFL SCI-STI-DK, Station 9, CH-1015 Lausanne, Switzerland;
École polytechnique fédérale de Lausanne, Switzerland | Digital twins based on systems engineering and semantic modeling
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Kitaeva, Anna | Tomsk State University, Russian Federation | System Identification for Manufacturing Control Applications Presenter |
| Kjeldgaard, Stefan | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Kjellsen, Håkon | Norwegian University of Science and Technology (NTNU), Norway | The Future of Lean Thinking and Practice |
| Kjersem, Kristina | Møreforsking AS, Norway | Operations Management in Engineer-to-Order Manufacturing Presenter |
| Klement, Nathalie | Arts et Métiers Institute of Technology, LISPEN, HESAM Université, Lille, France | Metaheuristics for production systems |
| Klumpp, Matthias | University of Göttingen, Germany;
FOM Hochschule für Oekonomie & Management GmbH, Germany;
Fraunhofer IML Dortmund, Germany | Production Management in Food Supply Chains |
| Knofius, Nils | Fieldmade AS, Norway | Regular session : Additive Manufacturing and mass customization |
| Knutstad, Gaute Andreas | SINTEF Manufacturing, Norway | Digital Transformation Approaches in Production Management |
| Kokuryo, Daisuke | Kobe Universtiy, Japan;
Graduate School of System Informatics, Kobe University;
Kobe University, Japan | Gastronomic Service System Design
Smart Supply Chain and Production in Society 5.0 Era
Smart Supply Chain and Production in Society 5.0 Era
Smart Supply Chain and Production in Society 5.0 Era |
| Kolovos, Dimitris | University of York, United Kingdom | Low-Code and Model-Driven Engineering for Production System |
| Konstantakopoulos, Grigorios D. | National Technical University of Athens, Greece | Blockchain in the Operations and Supply Chain Management Presenter |
| Korgin, Nikolay | V.A. Trapeznikov Institute of Control Sciences of RAS, Moscow, Russia | System Identification for Manufacturing Control Applications Presenter |
| Korpela, Kari | DBE Core, Helsinki, Finland | Blockchain in the Operations and Supply Chain Management |
| Kostik, Valentin | Karlsruhe Institute of Technology (KIT), Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Kouki, Chaaben | ESSCA, School of Management, France | Regular session : Maintenance improvement and lifecycle management |
| Kovriga, Svetlana | Institute of control sciences RAS, Russian Federation | System Identification for Manufacturing Control Applications |
| Kozuma, Shunsuke | Kindai University, Japan | Gastronomic Service System Design |
| Kuchinskii, Mikhail | SAP C.I.S. | System Identification for Manufacturing Control Applications |
| Kulvatunyou, Boonserm | National Institute of Standards and Technology, United States of America | Recent Advances in Sustainable Manufacturing |
| Kumar Agrawal, Tarun | KTH Royal Institute of Technology, 15136 Södertälje , Sweden | Digital Transformations Towards Supply Chain Resiliency |
| Kundu, Kaustav | National University of Singapore | Regular session : Maintenance improvement and lifecycle management |
| KURATA, Takeshi | National Institute of Advanced Industrial Science and Technology (AIST), Japan | Gastronomic Service System Design |
| Kurrewar, Harshad | Chalmers University of Technology, Sweden | Regular Session : Classification and data management methods Presenter |
| KURT, Asiye | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, France;
Univ. Grenoble Alpes, CNRS, Grenoble INP, LIG, France | Regular Session : Risk and performance management of supply chains Presenter |
| Kurt, Werner | thyssenkrupp Presta Schönebeck GmbH | Regular Session : Simulation and optimization of systems performances |
| Kvadsheim, Nina Pereira | Møreforsking AS, Norway | Recent Advances in Sustainable Manufacturing Presenter
The Future of Lean Thinking and Practice Presenter
The Future of Lean Thinking and Practice |
| Kyriazis, Dimosthenis | University of Piraeus, Greece | Digital twins based on systems engineering and semantic modeling |
| La Torre, Davide | SKEMA Business School, France;
SKEMA Business School, Université Côte d'Azur, France | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions
AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions
AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Ladier, Anne-Laure | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Metaheuristics for production systems |
| Laganà, Iside Rita | Department of Law, Economics and Human Sciences, Mediterranea University of Reggio Calabria, Italy | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions Presenter |
| Lagorio, Alexandra | University of Bergamo, Italy | The Future of Lean Thinking and Practice |
| Lalic, Bojan | University of Novi Sad, Faculty of Technical Sciences, Serbia | Regular session : Additive Manufacturing and mass customization |
| Lamghari, Amina | Université du Québec à Trois-Rivières, Canada | Regular Session : Simulation and optimization of systems performances |
| Lammi, Mika | Kouvola Innovation, Finland | Blockchain in the Operations and Supply Chain Management |
| Lang, Sebastian | OVGU, Germany;
Fraunhofer Institute for Factory Operation and Automation IFF, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Langer, Bernd | Karlsruhe University of Applied Science, Germany | The Future of Lean Thinking and Practice |
| Laptin, Victor | Lomonosov Moscow State University, Moscow, Russia | System Identification for Manufacturing Control Applications |
| Larroche, François | IMT Atlantique;
VIF Software | Sustainability in Production Planning and Lot-Sizing Presenter |
| Larsson, Daria | University of Stavanger, Norway ;
Blueday Technology AS, Norway | Operations Management in Engineer-to-Order Manufacturing Presenter
The Future of Lean Thinking and Practice Presenter |
| Lasch, Rainer | Technische Universität Dresden, Chair of Business Management, esp. Logistics, Germany | Blockchain in the Operations and Supply Chain Management |
| Lazaro, Oscar | Innovalia Association | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Le Hesran, Corentin | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Metaheuristics for production systems |
| Leão, Isabelle | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Lee, Chulung | School of Industrial Management Engineering, Korea University, Korea, Republic of (South Korea) | Regular Session : Classification and data management methods |
| Lee, Dae Yub | DEXTA Inc., Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Lee, Eunji | Technical University of Munich, Germany | Data-driven methods for Supply Chain optimization Presenter |
| Lee, Je-Hun | KAIST, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| LEE, JUNHYEOK | Department of Industrial Engineering, Seoul National University, Seoul, Korea | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Lee, Kangbok | Pohang University of Science and Technology, Korea, Republic of (South Korea) | Hybrid Approaches for Production Planning and Scheduling |
| Lee, Kwansoo | Pohang University of Science and Technology, Korea, Republic of (South Korea) | Hybrid Approaches for Production Planning and Scheduling |
| Lee, Sang Hyun | Yura, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Lee, Seokcheon | Purdue University, United States of America | Autonomous Robots in Delivery Logistics
Autonomous Robots in Delivery Logistics |
| Legros, Benjamin | EM Normandie, France | Regular Session : Advanced modelling approaches |
| Lehuédé, Fabien | IMT Atlantique, France | Data-driven methods for Supply Chain optimization |
| Lemieux, Andrée-Anne | Institut Français de la Mode, Paris, France | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Lemoine, David | IMT Atlantique;
LS2N UMR CNRS 6004;
IMT-Atlantique, LS2N UMR 6004 | Finance-Driven Supply Chain
Finance-Driven Supply Chain
Hybrid Approaches for Production Planning and Scheduling
Hybrid Approaches for Production Planning and Scheduling Presenter |
| Lenze, David | Technische Universität Dortmund, Germany | The Future of Lean Thinking and Practice |
| Lepenioti, Katerina | Information Management Unit (IMU), Institute of Communication and Computer Systems (ICCS), National Technical University of Athens (NTUA), Greece | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Lezoche, Mario | Université de Lorraine, CNRS, CRAN, Nancy, France | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Li, Haijiao | School of Business Administration, Hunan University, Changsha, Hunan, 410082, China;
Supply Chain and Logistics Optimization Research Central, Department of Mechanical, Automotive & Materials Engineering, University of Windsor, Windsor, Ontario, N9B 3P4, Canada | Smart and sustainable production and supply chains Presenter |
| Li, Han | Beijing Institute of Technology, Beijing 100081, China | Digital twins based on systems engineering and semantic modeling |
| Li, Li | College of Electronics and Information Engineering Tongji University, Shanghai 201804, China;
Shanghai Institute of Intelligent Science and Technology, Tongji University, Shanghai, 201804, China | Smart and sustainable production and supply chains |
| LI, Mingxing | epartment of Industrial and Manufacturing Systems Engineering, HKU-ZIRI Lab for Physical Internet, The University of Hong Kong, Hong Kong S.A.R. (China) | Regular Session : AI-based approaches for quality and performance improvement of production systems Presenter |
| Liborio Zapata, Melissa | Laboratoire Systèmes et Matèriaux pour la Mécatronique (SYMME), Université Savoie Mont Blanc;
Laboratoire d'Informatique, Systèmes, Traitement de l'Information et de la Connaissance (LISTIC), Université Savoie Mont Blanc | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Lietaert, Pieter | Flanders Make, Belgium | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Lima, Adalberto | Universidade Federal do Pará, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Lima, Luiz Antonio | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains Presenter |
| Lima, Nilsa Duarte da Silva | Paulista University-Graduate Program in Production Engineering, Brazil | Production Management in Food Supply Chains |
| Limere, Veronique | Ghent University, Belgium | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Lin, Kuo-Yi | College of Electronics and Information Engineering Tongji University, Shanghai 201804, China;
Shanghai Institute of Intelligent Science and Technology, Tongji University, Shanghai, 201804, China | Smart and sustainable production and supply chains |
| Lin, Tao | School of Economics & Management, Tongji University, Shanghai, Peoples's Republic of China | Supply Chain Risk Management under Coronavirus |
| Lin, Yaohu | Beihang University, P. R. China | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Listl, Franz Georg | Institute of Automation and Software Engineering, University of Stuttgart, Germany;
Siemens AG, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Liu, Hongbo | Avic Chengdu Civil Aircraft Co., Ltd, P. R. China | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Liu, Ming | Donghua University, China, People's Republic of;
Tongji University, China;
School of Economics & Management, Tongji University | Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus |
| Liu, Xin | Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| LIU, Yu | Centre de Gestion Scientifique - I3 - UMR CNRS 9217, MINES ParisTech, PSL Research University, 60 boulevard Saint-Michel, 75006 Paris, France | Digital twins based on systems engineering and semantic modeling |
| Liu, Yuguang | College of Electronics and Information Engineering Tongji University, Shanghai 201804, China | Smart and sustainable production and supply chains |
| Liu, Zhongzheng | School of Economics & Management, Tongji University, Shanghai 200092, China | Supply Chain Risk Management under Coronavirus |
| Liuzzi, Danilo | Department of Economics, Management and Quantitative Methods, University of Milan, Italy | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Locatelli, Alberto | University of Modena and Reggio Emilia, Italy | Production Management in Food Supply Chains |
| Locatelli, Marco | University of Parma, Italy | Production Management in Food Supply Chains |
| Lodgaard, Eirin | SINTEF Manufacturing, Norway | Digital Transformation Approaches in Production Management Presenter |
| Loger, Benoit, | IMT Atlantique, France | Data-driven methods for Supply Chain optimization Presenter |
| Lohmer, Jacob | Technische Universität Dresden, Chair of Business Management, esp. Logistics, Germany | Blockchain in the Operations and Supply Chain Management Presenter |
| Lohse, Oliver | Siemens AG, Germany | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Lombardi, Franco | Politecnico di Torino, Italy | Regular Session : Simulation and optimization of systems performances |
| Lopes, Isabel da Silva | ALGORITMI Research Centre, University of Minho, Guimarães, Portugal | Regular Session : Classification and data management methods
Regular session : Maintenance improvement and lifecycle management |
| Lordelo, Sandro Alberto Vianna | Universidade Federal do Pará, Brazil;
Federal Fluminense University, Brazil;
Fluminense Federal University, Niterói, Rio de Janeiro, Brazil. | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Loske, Dominic | University of Murcia, Spain;
FOM Hochschule für Oekonomie & Management GmbH, Germany | Production Management in Food Supply Chains |
| Loti de Lima, Vin´ıcius | Institute of Computing, University of Campinas, Campinas-SP, Brazil | Production Management in Food Supply Chains |
| Lourenço, Nuno | University of Coimbra, CISUC, Department of Informatics Engineering | Regular session : Maintenance improvement and lifecycle management |
| Lu, Jinzhi | EPFL SCI-STI-DK, Station 9, CH-1015 Lausanne, Switzerland | Digital twins based on systems engineering and semantic modeling
Digital twins based on systems engineering and semantic modeling
Digital twins based on systems engineering and semantic modeling |
| Lu, Xingwei | School of Management, Huazhong University of Science and Technology, Wuhan, China | Smart and sustainable production and supply chains Presenter |
| Lucet, Corinne | MIS Laboratory, France;
Laboratoire MIS - Université de Picardie Jules Verne | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Lüftenegger, Egon | CAMPUS02, Austria | Digital Transformation Approaches in Production Management |
| Lukinskiy, Valery | National Research University Higher School of Economics (HSE University), Russian Federation | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty
Regular Session : Advanced modelling approaches |
| Lukinskiy, Vladislav | National Research University Higher School of Economics (HSE University), Russian Federation | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter
Regular Session : Advanced modelling approaches Presenter |
| Lund, Håkon | SINTEF DIGITAL, Norway | Regular session : Additive Manufacturing and mass customization Presenter |
| Luo, Dan | IMT Atlantique, LS2N-CNRS, La Chantrerie, 4 Rue Alfred Kastler, 44307 Nantes, France | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Luo, Hongyuan | Nanomedicine Lab, Univ. Bourgogne Franche-Comté, UTBM, France | Regular session : New approaches for routing problem solving Presenter |
| Lym, Joohee | Sungkyunkwan University, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Lyu, Qianhang | Huazhong University of Science and Technology, China, People's Republic of | Blockchain in the Operations and Supply Chain Management Presenter |
| Maass, Wolfgang | Saarland University, Germany;
German Research Center for Artificial Intelligence, Germany | Engineering of Smart-Product-Service-Systems of the Future |
| Macchi, Marco | Politecnico di Milano, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems
Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Macchiaroli, Roberto | University of Campania Luigi Vanvitelli, Italy | Digital Transformations Towards Supply Chain Resiliency |
| Machado, Sivanilza Teixeira | Instituto Federal de Educação, Ciência e Tecnologia de São Paulo - Câmpus Suzano | Regular session : Crossdock and transportation issues |
| Madreiter, Theresa | Vienna University of Technology (TU Wien), Austria | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Madsen, Ole | Aalborg University, Denmark | Digital Transformations Towards Supply Chain Resiliency |
| Maetschke, Jan | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems Presenter |
| Magalhaes, Luciano | Federal University of Santa Catarina, Brazil | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Maghazei, Omid | ETH Zurich, Switzerland | Robotics Technologies for Control, Smart Manufacturing and Logistics Presenter |
| Magnanini, Maria Chiara | Politecnico di Milano, Italy | Digital Transformation Approaches in Production Management |
| Mahanty, Biswajit | Indian Institute of Technology Kharagpur, India | Digital Transformations Towards Supply Chain Resiliency |
| Mahmoodjanloo, Mehdi | INSA Lyon- LIRIS Laboratory, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Makantasis, Georgios | INTRASOFT International, Luxembourg | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Makarovskikh, Tatiana | South Ural State University, Russian Federation | Regular session : New approaches for routing problem solving |
| Makboul, Salma | Modelling and Mathematical Structure, FST FEZ, SMBA University, Morocco | Lean and Six Sigma in Services Healthcare Presenter |
| Makris, Sotiris | LMS-University of Patras, Greece | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Makssoud, Fatme | Lebanese University, Lebanon | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Malaguti, Roney | Stratio Automotive - R&D Department;
University of Coimbra, CEMMPRE, Department of Mechanical Engineering | Regular session : Maintenance improvement and lifecycle management |
| Mandal, Jasashwi | Indian Institute of Technology Kharagpur | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Mandel, Alexander | Trapeznikov Institute of Control Sciences RAS, Russian Federation | System Identification for Manufacturing Control Applications
System Identification for Manufacturing Control Applications |
| Mangers, Jeff | University of Luxembourg, Luxembourg | Smart and sustainable production and supply chains Presenter |
| MANGIONE, Fabien | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, France | Regular Session : Risk and performance management of supply chains |
| MANNA, APURBA | Research Centre in Natural Sciences, Raja N L Khan Women's College (Autonomous), India | Regular Session : Supply chain and routing management |
| Mantravadi, Soujanya | Aalborg University, Denmark | Marco Garetti Doctoral Workshop Track 1 - Mantravadi Soujanya |
| Marangé, Pascale | Université de Lorraine, CNRS, CRAN | Hybrid Approaches for Production Planning and Scheduling |
| Marchesano, Maria Grazia | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter
Modern scheduling and applications in industry 4.0 |
| Marciano, Filippo | University of Brescia, Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Marguglio, Angelo | Engineering Ingegneria Informatica S.p.A | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Marinho, João Eduardo | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Marini, Alessandro | Quantra S.r.l., Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Marjanovic, Ugljesa | University of Novi Sad, Faculty of Technical Sciences, Serbia;
University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia | Digital Transformation Approaches in Production Management Presenter
Engineering of Smart-Product-Service-Systems of the Future
Regular session : Additive Manufacturing and mass customization |
| Marmier, François | ICUBE, CNRS UMR 7357, University of Strasbourg, Strasbourg, France | Regular Session : Risk and performance management of supply chains |
| Marmolejo-Saucedo, Jose Antonio | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Marques, Melissa C | Edinburgh Business School, Heriot-Watt University | Recent Advances in Sustainable Manufacturing Presenter |
| Martinez, Ana Paula | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Martinez, Angel Antonio | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains |
| Martinez de Yuso, Alicia | ZLC | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Martins, Jorge Tiago | VTT Technical Research Centre of Finland, Espoo | Regular Session : Green production and circularity concepts |
| Masi, Antonio | Politecnico di Milano, Italy | Operations Management in Engineer-to-Order Manufacturing |
| Masmoudi, Oussama | Computer Laboratory and Digital Society (LIST3N), France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Masone, Adriano | University of Naples "Federico II", Italy | Autonomous Robots in Delivery Logistics |
| Massonnet, Guillaume | IMT Atlantique, France | Data-driven methods for Supply Chain optimization
Finance-Driven Supply Chain
Sustainability in Production Planning and Lot-Sizing |
| Materzok, Nick | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Recent Advances in Sustainable Manufacturing |
| Mazzuto, Giovanni | Università Politecnica delle Marche, Italy | Regular session : Maintenance improvement and lifecycle management |
| Medini, Khaled | Mines Saint-Etienne, Univ Clermont Auvergne, CNRS, UMR 6158 LIMOS, Henri Fayol Insti-tute, F-42023 Saint-Etienne France | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Mejía-Moncayo, Camilo | École de Technologie Supérieure, Canada | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Melnick, Phillip | The Pennsylvania State University, United States of America | Engineering of Smart-Product-Service-Systems of the Future |
| MENDES DOS REIS, JOAO GILBERTO | Universidade Paulista, Brazil | Production Management in Food Supply Chains Presenter |
| Mendiela, Sélène | Univ Lyon, INSA Lyon, UCBL, Univ Lumière Lyon 2, DISP, EA4570, 69621 Villeurbanne, France | Recent Advances in Sustainable Manufacturing |
| Menesidou, Sofia Anna | Ubitech Ltd, Digital Security & Trusted Computing Group, Greece | Digital twins based on systems engineering and semantic modeling |
| Mentzas, Gregoris | Information Management Unit (IMU), Institute of Communication and Computer Systems (ICCS), National Technical University of Athens (NTUA), Greece | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Meskens, Nadine | Université Catholique de Louvain;
Louvain School of Management, Lourim | Regular session : New approaches for routing problem solving |
| Metzker, Paula | IMT Atlantique, France | Sustainability in Production Planning and Lot-Sizing Presenter |
| Meyers, Bart | Flanders Make, Belgium | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Mezzogori, Davide | University of Parma, Italy | Serious Games Analytics: Improving Games and Learning Support |
| Michael, Judith | RWTH aachen University, Germany | Low-Code and Model-Driven Engineering for Production System |
| Michalak, Jean-Louis | Beta, CNRS UMR 7522, University of Strasbourg, Strasbourg, France | Regular Session : Risk and performance management of supply chains |
| Mihalis, Giannakis | Audencia Business School, Nantes, France | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Min, Li Li | School of Medical Sciences, Campinas State University | Lean and Six Sigma in Services Healthcare |
| Minner, Stefan | Technical University of Munich, Germany | Data-driven methods for Supply Chain optimization |
| Minoufekr, Meysam | University of Luxembourg, Luxembourg | Smart and sustainable production and supply chains |
| Miranda, Salvatore | University of Salerno, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Mishra, Nishikant | University of Hull | Digital Transformations Towards Supply Chain Resiliency |
| MITRA, KRISHNENDRANATH | University of Calcutta | Digital Transformations Towards Supply Chain Resiliency |
| Mitra, Rony | Department of Mathematics, Indian Institute of Technology Kharagpur, Kharagpur, India | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Mladenić, Dunja | Jožef Stefan Institute, Slovenia | Digital twins based on systems engineering and semantic modeling
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| MOALLA LOUKIL, Taicir | FSEGS, Tunisia | Regular session : New approaches for routing problem solving |
| Moeller, Charles | Aalborg University, Denmark | Marco Garetti Doctoral Workshop Track 1 - Mantravadi Soujanya |
| Mogos, Maria Flavia | SINTEF Manufacturing, Norway | Regular Session : Green production and circularity concepts |
| Mohan, Usha | Department of Management Studies, Indian Institute of Technology Madras, Chennai, India | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Mohanta, Pulok Ranjan | Indian Institute of Technology Kharagpur, India | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Molina, Arturo | Tecnologico de Monterrey, Mexico | Regular session : Improvement of design and operation of manufacturing systems |
| Montemanni, Roberto | University of Modena and Reggio Emilia, Italy | Production Management in Food Supply Chains |
| Montoya-Torres, Jairo R. | Universidad de La Sabana, Colombia | Recent Advances in Sustainable Manufacturing |
| MOON, ILKYEONG | Department of Industrial Engineering, Seoul National University, Seoul, Korea;
Institute for Industrial Systems Innovation, Seoul National University, Seoul, Korea | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty
Regular Session : Supply chain and routing management |
| Moon, Kyungduk | Pohang University of Science and Technology, Korea, Republic of (South Korea) | Hybrid Approaches for Production Planning and Scheduling |
| Moraes, Thais de Castro | National University of Singapore, Singapore | Data-driven methods for Supply Chain optimization Presenter |
| MORAUX, Franck | Université de Rennes 1, CNRS, CREM UMR6211, France | Finance-Driven Supply Chain |
| Mordonini, Monica | Department of Engineering and Architecture, University of Parma, Parma, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Moreira, Rafael | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Morgan, Richard | University of Wales, Trinity St. David, Wales | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Mounié, Grégory | Univ. Grenoble Alpes, Inria, CNRS, Grenoble INP, LIG, 38000 Grenoble, France | Sustainability in Production Planning and Lot-Sizing |
| MOURTOS, IOANNIS | Athens University of Economics and Business, Greece | Metaheuristics for production systems |
| Msakni, Mohamed Kais | The Norwegian University of Science and Technology, Norway | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Mugurusi, Godfrey | Norwegian University of Science and Technology, Norway, Norway | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions Presenter |
| Mukku, Vasu Dev | OVGU, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Munguia, Aline S. A. | IMT-Atlantique, France | Regular Session : Green production and circularity concepts |
| Murino, Teresa | Department of Chemical, Materials and Production Engineering, University of Naples “Federi-co II” – Piazzale V. Tecchio 80, 80125 Naples (Italy) | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Murino, Teresa | University of Naples "Federico II", Italy | Autonomous Robots in Delivery Logistics |
| Mušić, Denis | “Dzemal Bijedic” University, Faculty of Information Technologies, Bosnia and Herzegovina | Digital Transformation Approaches in Production Management |
| Mwesiumo, Deodat E | Molde University College, Norway;
Molde University College, Specialized University in Logistics; Molde, Norway | Operations Management in Engineer-to-Order Manufacturing Presenter
The Future of Lean Thinking and Practice
Recent Advances in Sustainable Manufacturing |
| Myklebust, Odd | Sintef Manufacturing, Norway | Digital Transformation Approaches in Production Management |
| Nääs, Irenilza de Alencar | Paulista University-Graduate Program in Production Engineering, Brazil | Production Management in Food Supply Chains
Production Management in Food Supply Chains Presenter |
| Nabati, E.G. | University of Bremen, Faculty of Production Engineering, BIK-Institute for Integrated Product Development, 28359 Bremen, Germany | Regular Session : Advanced modelling approaches |
| Nagi, Rakesh | University of Illinois, Urbana-Champaign, United States of America | Regular Session : Advanced modelling approaches Presenter |
| Nait Sidi Moh, Ahmed | Picardie Jules Verne University (PJVU), LTI Laboratory, Saint Quentin, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Nakade, Koichi | Nagoya Institute of Technology, Japan | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Napoleone, Alessia | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Narbaev, Timur | Kazakh-British Technical University, Kazakhstan | Regular session : Maintenance improvement and lifecycle management |
| Nascimento, Stephanie D' Amato | UFF - Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Nattaf, Margaux | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France | Sustainability in Production Planning and Lot-Sizing |
| Netland, Torbjørn H. | ETH Zürich, Switzerland | Blockchain in the Operations and Supply Chain Management
Engineering of Smart-Product-Service-Systems of the Future
Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Neto, Manoel Eulálio | Centro Universitário Santo Agostinho, Teresina | Production Management in Food Supply Chains |
| Neto, Olavo de Oliveira Braga | Ministério da Saúde - DAHU, SAES;
Ministry of Health – Secretariat of Specialized Health Care – Department of Hospi-tal, Home and Emergency Care | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Nettleton, David | IRIS | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Neufeld, Janis Sebastian | Technische Universität Dresden, Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Newman, Alantha | G-SCOP, France | Regular session : Crossdock and transportation issues |
| Nguyen, Quoc-Thông | Université de Lille, ENSAIT, GEMTEX, F-59000 Lille, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Nielsen, Kjeld | Aalborg University, Denmark | New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Nieman, Scott | Land O'Lakes, United States of America | Recent Advances in Sustainable Manufacturing |
| Nishi, Tatsushi | Okayama University, Japan | Smart Supply Chain and Production in Society 5.0 Era |
| Niu, Yaxu | Beijing University of Chemical Technology;
Delft University of Technology | Regular Session : Robotics and Human aspects |
| Nogueira, Monica | North Carolina State University, United States of America | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Nogueira, Sara Monaliza Sousa | Fluminense Federal University, Niterói, Rio de Janeiro, Brazil. | Lean and Six Sigma in Services Healthcare |
| Noh, Sang Do | Sungkyunkwan University, Korea, Republic of (South Korea);
Sungkyunkwan University, South Korea | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability
Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Noleen, Pisa | University of Johannesburg, South Africa | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Nonaka, Mio | Mitsubishi Electric Corporation, | Smart Supply Chain and Production in Society 5.0 Era |
| Nonaka, Tomomi | Ritsumeikan University, Japan | Gastronomic Service System Design |
| Noorwali, Albraa A. | University of Bordeaux, France;
Kedge Business School, France | Regular session : Additive Manufacturing and mass customization Presenter |
| Norre, Sylvie | Clermont Auvergne University, LIMOS UMR 6158 | Hybrid Approaches for Production Planning and Scheduling |
| Novalija, Inna | Jožef Stefan Institute, Slovenia | Digital twins based on systems engineering and semantic modeling
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Novotny, Petr | IBM T.J Watson Research Center | Blockchain in the Operations and Supply Chain Management |
| Nujen, Bella B. | Norwegian University of Science and Technology | Operations Management in Engineer-to-Order Manufacturing
Recent Advances in Sustainable Manufacturing
The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice |
| Nyqvist, Per | Chalmers University of Technology, Sweden | Regular Session : Classification and data management methods |
| Oellerich, Jan | Karlsruhe Institute of Technology (KIT), Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Offodile, O. Felix | College of Business Administration, Kent State University, United States of America | Regular Session : Supply chain and routing management |
| Ognibene Pietri, Nicola | University of Modena and Reggio Emilia, Italy | Production Management in Food Supply Chains Presenter |
| Öhman, Mikael | Aalto University, Finland | Serious Games Analytics: Improving Games and Learning Support Presenter |
| Ohura, Syuichi | Ganko Food Service co. ltd., | Gastronomic Service System Design |
| Olhager, Jan | Department of Industrial Management and Logistics, Lund University, Lund, Sweden;
Lund University, 22100, Lund, Sweden | Data-driven methods for Supply Chain optimization
Digital Transformations Towards Supply Chain Resiliency |
| Oluka, Pross Nagitta | Uganda Management Institute, Kampala, Uganda | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions |
| Oluyisola, Olumide Emmanuel | Norwegian University of Science and Technology (NTNU), Trondheim, Norway | Operations Management in Engineer-to-Order Manufacturing |
| Ortega-Maldonado, Eduardo Cassiel | Facultad de Ingeniería, Departamento de Ingeniería en Sistemas Biomédicos, Universidad Nacional Autónoma de México, Mexico City, Mexico | Digital twins in companies first developments and future challenges |
| Osorio Gomez, Juan Carlos | Universidad del Valle, Colombia | Regular Session : Risk and performance management of supply chains |
| Ouedraogo, Abdoul-Fatao | Institute of Artificial Intelligence and Data Science, Dong A University, Da Nang, Vietnam | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| OWASI, Yvonne Rachael | Audencia Business School, France | Production Management in Food Supply Chains |
| ÖZCEYLAN, Eren | Gaziantep University, Turkey | Regular Session : Classification and data management methods
Regular session : New approaches for routing problem solving |
| Øien, Christian Dalheim | SINTEF Manufacturing, Norway | Digital twins in companies first developments and future challenges |
| Pacagnella Junior, Antônio Carlos | School of Applied Sciences, Campinas State University | Lean and Six Sigma in Services Healthcare |
| Pacheco, Leonor | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Paes, Graciele | Universidade Federal do Rio de Janeiro, Brazil | Lean and Six Sigma in Services Healthcare |
| Pagan, Jesus | Ohio University, USA | Regular Session : Robotics and Human aspects |
| Pan, Fuman | Shanxi Aerospace Tsinghua Equipment Co., Ltd., P. R. China | System Identification for Manufacturing Control Applications |
| PAN, Shenle | Centre de Gestion Scientifique - I3 - UMR CNRS 9217, MINES ParisTech, PSL Research University, 60 boulevard Saint-Michel, 75006 Paris, France | Digital twins based on systems engineering and semantic modeling |
| Papadopoulos, Georgios A. | National Technical University of Athens, Greece | Blockchain in the Operations and Supply Chain Management |
| Papamartzivanos, Dimitrios | Ubitech Ltd, Digital Security & Trusted Computing Group, Greece | Digital twins based on systems engineering and semantic modeling |
| Pardo Melo, David Arturo | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France;
Airbus Helicopters, 13700, Marignane, France | Regular session : Crossdock and transportation issues |
| PARK, JUNSEOK | Department of Industrial Engineering, Seoul National University, Seoul, Korea | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| PASHKEVICH, Anatol | Laboratoire des Sciences du Numérique de Nantes(LS2N), UMR CNRS 6004, Nantes, France;
IMT Atlantique Bretagne Pays de la Loire, Nantes, France | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Patidar, Akshay | Malaviya National Institute of Technology, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Patil, Chintan | Harold and Inge Marcus Department of Industrial and Manufacturing Engineering, The Pennsylvania State University, United States of America | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Pehlivan, Canan | Yeditepe University, Turkey | Regular Session : Green production and circularity concepts |
| Pellegrino, Mattia | Department of Engineering and Architecture, University of Parma, Parma, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Pellerin, Robert | Ecole Polytechnique de Montréal, Montréal, Canada | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Pelliccia, Luigi | Department of Factory Planning and Factory Management, Chemnitz University of Technology, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Penz, Bernard | Univ. Grenoble Alpes, CNRS, Grenoble INP, G-SCOP, 38000 Grenoble, France | Regular session : Crossdock and transportation issues |
| Pero, Margherita | Politecnico di Milano, Italy | Operations Management in Engineer-to-Order Manufacturing |
| Peron, Mirco | NTNU, Norway | Regular session : Additive Manufacturing and mass customization Presenter |
| Perrone, Gianni Piero | Perrone Informatica, Italy | Regular Session : Supply chain and routing management |
| peter, Kilbourn | University of Johannesburg, South Africa | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Pezzotta, Giuditta | University of Bergamo, Italy | Engineering of Smart-Product-Service-Systems of the Future
Engineering of Smart-Product-Service-Systems of the Future Presenter |
| Phan, Dinh Anh | Université de Rennes 1, CNRS, CREM UMR6211, France | Finance-Driven Supply Chain Presenter |
| Pierantonio, Alfonso | University of L'Aquila, Italy | Low-Code and Model-Driven Engineering for Production System |
| Pinto, Sergio Crespo Coelho da Silva | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare |
| Pirola, Fabiana | University of Bergamo, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Plapper, Peter | University of Luxembourg, Luxembourg | Digital Transformation Approaches in Production Management
Smart and sustainable production and supply chains |
| Plaßmann, Jessica | Hochschule Trier, Germany | Digital Transformation Approaches in Production Management |
| Poirson, Emilie | Ecole Centrale de Nantes, France | Regular session : Optimization of production and transportation systems |
| Polenghi, Adalberto | Politecnico di Milano, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Polukeev, Alexey | Lund University, Sweden | Smart and sustainable production and supply chains |
| Popolo, Valentina | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0.
Modern scheduling and applications in industry 4.0 Presenter |
| Portioli Staudacher, Alberto | Politecnico di Milano, Italy | Regular session : Maintenance improvement and lifecycle management
The New Digital Lean Manufacturing Paradigm |
| Powell, Daryl | SINTEF, Norway;
SINTEF Manufacturing, Norway;
Norwegian University of Science and Technology, Norway | Digital Transformation Approaches in Production Management Presenter
Digital Transformation of SME Manufacturers: The Crucial Role of Standard Presenter
Engineering of Smart-Product-Service-Systems of the Future
Regular Session : Green production and circularity concepts
The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice
The New Digital Lean Manufacturing Paradigm |
| Powell, Daryl J. | Norwegian University of Science and Technology (NTNU), Norway | The Future of Lean Thinking and Practice |
| Powell, Daryl John | Sintef Manufacturing, Norway | Digital Transformation Approaches in Production Management |
| Prabhu, Vittaldas V. | Harold and Inge Marcus Department of Industrial and Manufacturing Engineering, The Pennsylvania State University, United States of America | Digital Transformations Towards Supply Chain Resiliency
Engineering of Smart-Product-Service-Systems of the Future
Gastronomic Service System Design |
| Pratap, Saurabh | Department of Mechanical Engineering, Indian Institute of Technology (IIT-BHU) Varanasi, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Psarommatis, Foivos | École polytechnique fédérale de Lausanne, Switzerland | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Pütz, Noah | Siemens AG, Germany | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Qi, Peng | Huazhong University of Science and Technology, China, People's Republic of | Blockchain in the Operations and Supply Chain Management |
| Qi, Xuanchang | Southeast University, China, People's Republic of | Smart and sustainable production and supply chains Presenter |
| Qin, Liang | School of Mechanical Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, China | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Quezada, Franco | Sorbonne Université, LIP6, 75005 Paris, France;
Universidad de Santiago de Chile, Santiago, Chile | Sustainability in Production Planning and Lot-Sizing Presenter |
| Raa, Birger | Ghent University, Belgium | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Rabelo, Ricardo | Federal University of Santa Catarina, Brazil | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability Presenter |
| Radke, Andreas M. | mSE North America, Inc, United States of America | Digital Transformation of SME Manufacturers: The Crucial Role of Standard Presenter |
| Rakic, Slavko | University of Novi Sad, Faculty of Technical Sciences, Serbia | Regular session : Additive Manufacturing and mass customization |
| Rakic, Slavko | University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia | Engineering of Smart-Product-Service-Systems of the Future |
| Ramillion, Quentin J.L. | Norwegian University of Science and Technology (NTNU), Norway | The Future of Lean Thinking and Practice |
| Ramírez, José | Tecnologico de Monterrey, Mexico | Regular session : Improvement of design and operation of manufacturing systems |
| RAMPARANY, Fano | Orange Labs, France | Digital twins based on systems engineering and semantic modeling |
| Rao, Yunqing | Huazhong University of Science and Technology, China, People's Republic of | Blockchain in the Operations and Supply Chain Management |
| Rapaccini, Mario | Department of Industrial Engineering, University of Florence, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Ratnayake, R.M. Chandima | University of Stavanger, Norway;
Blueday Technology AS, Norway | The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice
Operations Management in Engineer-to-Order Manufacturing
The Future of Lean Thinking and Practice |
| Ravaut, Yannick | Thales Communications, Cholet, France | Regular session : Optimization of production and transportation systems |
| Razm, Sobhan | IMT Atlantique, France | Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Reforgiato Recupero, Diego | R2M Solution Srl, Italy;
University of Cagliari, Italy | Digital twins based on systems engineering and semantic modeling |
| Regending, Yannik | Karlsruhe University of Applied Science, Germany | The Future of Lean Thinking and Practice |
| Reggelin, Tobias | OVGU, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Reichardt, Paul | OVGU, Germany | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Reis, João Gilberto Mendes dos | RESUP- Research Group in Supply Chain Management - Postgraduate Program in Production Engineering, Universidade Paulista, São Paulo, Brazil | Production Management in Food Supply Chains
Regular session : Crossdock and transportation issues |
| Reis, Milena Estanislau Diniz Mansur dos | Federal University of Rio de Janeiro, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Reke, Eivind | Sintef Manufacturing, Norway | The Future of Lean Thinking and Practice Presenter
The Future of Lean Thinking and Practice
The Future of Lean Thinking and Practice |
| Rekik, Yacine | emlyon business school, 23 avenue Guy de Collongue, Ecully, Lyon 69134, France | Finance-Driven Supply Chain
Regular session : Optimization of supply chain agility and reconfigurability |
| Relich, Marcin | University of Zielona Gora, Poland | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Ren, Libo | Clermont Ferrand University, France | Modern scheduling and applications in industry 4.0 |
| Reverberi, Davide | University of Parma, Italy | Serious Games Analytics: Improving Games and Learning Support |
| Riane, Fouad | Ecole Centrale de Casablanca;
LGI CentraleSupélec Paris Saclay University;
FST Settat, Hassan Premier University | Regular session : New approaches for routing problem solving |
| Richter, Ralph | Technische Universität Dortmund, Germany | The Future of Lean Thinking and Practice Presenter |
| Riedel, Ralph | Department of Factory Planning and Factory Management, Chemnitz University of Technology, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Rifii, Doae | Mines Saint-Etienne, F-42023 Saint-Etienne France | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Rinaldi, Marta | University of Campania Luigi Vanvitelli, Italy | Digital Transformations Towards Supply Chain Resiliency |
| Risan, Anders | The Norwegian University of Science and Technology, Norway | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Rix, Calvin | FIR an der RWTH Aachen, Germany | Regular Session : Simulation and optimization of systems performances |
| Robredo, Regina | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Roda, Irene | Politecnico di Milano, Italy | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems
Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Rodrigues, Gabriel Santos | Universidade Paulista | Regular session : Crossdock and transportation issues |
| Rodriguez, Roman | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Rohaninejad, Mohammad | Industrial Informatics Department, Czech Institute of Informatics Robotics and Cybernetics, Czech Technical University in Prague, Prague, Czech Republic | Hybrid Approaches for Production Planning and Scheduling Presenter |
| Rohde, Wolfgang | Siemens Corporation, United States of America | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Rojas-Arce, Jorge Luis | Facultad de Ingeniería, Departamento de Ingeniería en Sistemas Biomédicos, Universidad Nacional Autónoma de México, Mexico City, Mexico | Digital twins in companies first developments and future challenges Presenter |
| Romagnoli, Giovanni | University of Parma, Italy | Serious Games Analytics: Improving Games and Learning Support Presenter |
| Romain, Guillaume | IRIT, University of Toulouse Jean Jaures | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Romero, David | Tecnológico de Monterrey, Mexico;
Tecnológico de Monterrey, Del Puente 222, Ejidos de Huipulco, 14380 Mexico City, Mexico | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability
Digital Transformation of SME Manufacturers: The Crucial Role of Standard
Engineering of Smart-Product-Service-Systems of the Future |
| Romero, Uriel | Panamerican University, Mexico | Digital twins in companies first developments and future challenges |
| Rosen, Roland | Siemens AG, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Roser, Christoph | Karlsruhe University of Applied Science, Germany | The Future of Lean Thinking and Practice Presenter
The Future of Lean Thinking and Practice Presenter |
| Rost, Robert | Hamburg University of Technology (TUHH), Germany | Digital Transformation Approaches in Production Management Presenter |
| ROY, ARINDAM | Department of Computer Science & Application, Prabhat Kumar College, Contai, West Bengal, India;
Department of Industrial Engineering, Seoul National University, Seoul, Korea | Regular Session : Supply chain and routing management Presenter |
| Roy, Daniel | LGIPM, University of Lorraine, Metz, France | Regular Session : Supply chain and routing management |
| Roy, Debjit | Department of Production and Quantitative Methods, Indian Institute of Management Ahmedabad, Gujarat, India | Autonomous Robots in Delivery Logistics |
| Rožanec, Jože Martin | Jožef Stefan International Postgraduate School, Slovenia;
Jožef Stefan Institute, Slovenia;
Qlector d.o.o., Slovenia | Digital twins based on systems engineering and semantic modeling Presenter
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Rødseth, Harald | Oceaneering, Norway | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems Presenter |
| Røstad, Carl Christian | SINTEF, Norway | Regular Session : Improvement models and methods for green and innovative systems Presenter |
| RUGGERO, SERGIO MIELE | UNIVERSIDADE PAULISTA UNIP, Brazil | The New Digital Lean Manufacturing Paradigm |
| Saari, Leila | VTT Technical Research Centre of Finland, Oulu | Regular Session : Green production and circularity concepts |
| Sabitov, Rustem | Kazan National Research Technical University named after A.N.Tupolev | System Identification for Manufacturing Control Applications |
| Sabitov, Shamil | Kazan Federal University | System Identification for Manufacturing Control Applications |
| SABRI, Abderrazzak | Univ. Artois, EA 3926, Laboratoire de Génie Informatique et d'Automatique de l'Artois (LGI2A) Béthune, F-62400, France.;
National institute of posts and telecommunications, Rabat, Morroco | Regular session : Maintenance improvement and lifecycle management Presenter |
| Saccani, Nicola | Department of Mechanical and Industrial Engineering, University of Brescia, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Safra, Imen | LR-ACS, ENIT, Tunisia | Regular session : Maintenance improvement and lifecycle management |
| Sahoo, Rosalin | Indian Institute of Technology, Kharagpur, 721302, India | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Sakamoto, Liliam Sayuri | Universidade Paulista - UNIP, Brazil | Production Management in Food Supply Chains |
| Sala, Roberto | University of Bergamo, Italy | Engineering of Smart-Product-Service-Systems of the Future Presenter |
| Salama, Shady | Kobe University, Japan | Smart Supply Chain and Production in Society 5.0 Era Presenter |
| Salassa, Fabio | Politecnico di Torino, DIGEP, Corso Duca degli Abruzzi 24, 10129 Torino, Italy | Smart Methods and Techniques for Sustainable Supply Chain Management Presenter |
| Salatiello, Emma | University of Naples Federico II, Italy | Marco Garetti Doctoral Workshop Track 2 - Salatiello Emma |
| Sallinen, Niina | LAB University of Applied Sciences, FInland | Serious Games Analytics: Improving Games and Learning Support |
| Samardzic, Marko | University of Novi Sad, Faculty of Technical Sciences, Serbia | Digital Transformation Approaches in Production Management |
| Sanchez, Fernando | Panamerican University, Mexico | Digital twins in companies first developments and future challenges Presenter |
| Sangwan, Kuldeep Singh | Birla Institute of Technology and Science Pilani Campus, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Santamaria Acevedo, Gustavo | CentraleSupelec, France | Regular Session : Advanced modelling approaches Presenter |
| Santana, Emerson da Silva | Technological Innovation, UNIFESP, BrazilGraduate Studies in Technological Innovation, UNIFESP, São Paulo, Brazil | The Role of Emerging Technologies in Disaster Relief Operations: Lessons from COVID-19 |
| Santhiapillai, Felix Preshanth | University of Stavanger, Norway | The Future of Lean Thinking and Practice Presenter
The Future of Lean Thinking and Practice Presenter |
| Santillo, Liberatina Carmela | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Santos, Alexandre Beraldi | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter
Lean and Six Sigma in Services Healthcare |
| Santos, Gabriel Nascimento | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare |
| Sarin, Subhash.C | Virginia Tech, Blacksburg, Virginia, United States of America | AI for Resilience in Global Supply Chain Networks in the Context of Pandemic Disruptions Presenter |
| Sarivan, Ioan-Matei | Aalborg University, Denmark | Digital Transformations Towards Supply Chain Resiliency Presenter
Marco Garetti Doctoral Workshop Track 1 - Sarivan Ioan-Matei |
| Sarkar, Biswajit | Yonsei University | Regular Session : Improvement models and methods for green and innovative systems Presenter |
| Sarkar, Mitali | Chung-Ang University | Regular Session : Improvement models and methods for green and innovative systems |
| Saso, Taiki | Okayama University, Japan | Smart Supply Chain and Production in Society 5.0 Era Presenter |
| Sassanelli, Claudio | Politecnico di Milano, Italy | Engineering of Smart-Product-Service-Systems of the Future Presenter |
| Savin, Sergei | Innopolis University, Russian Federation | Robotics Technologies for Control, Smart Manufacturing and Logistics Presenter
Robotics Technologies for Control, Smart Manufacturing and Logistics Presenter |
| Savkovic, Milena | University of Novi Sad, Faculty of Technical Sciences, Serbia | Regular session : Additive Manufacturing and mass customization Presenter |
| Schiller, Christian | Fraunhofer IAO, Germany | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Schjølberg, Per | Norwegian University of Science and Technology, Norway | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Schmidhuber, Matthias | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems |
| Schmidt, Sascha | Otto-von-Guericke-University, Germany | Regular session : Improvement of design and operation of manufacturing systems Presenter |
| Schneckenreither, Manuel | University of Innsbruck, Austria | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Schou, Casper | Aalborg University, Denmark | Digital Transformations Towards Supply Chain Resiliency |
| Schuh, Günther | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems |
| Schulte, Frederik | Delft University of Technology | Regular Session : Robotics and Human aspects |
| Schumacher, Patrick | Technische Universität Braunschweig, Institute of Automotive Management and Industrial Production, Chair of Production and Logistics, Germany | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Schütz, Peter | The Norwegian University of Science and Technology, Norway | Regular Session : AI-based approaches for quality and performance improvement of production systems |
| Seino, Tsubasa | Nagoya Institute of Technology, Japan | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty |
| Selmi, Mohamed Haythem | Industrial Engineering Laboratory, Centralesupelec, University of Paris Saclay, France | Finance-Driven Supply Chain Presenter |
| Senju, Kotone | Mitsubishi Electric Corporation, | Smart Supply Chain and Production in Society 5.0 Era |
| Sergeev, Vladimir | V.A. Trapeznikov Institute of Control Sciences of RAS, Moscow, Russia | System Identification for Manufacturing Control Applications |
| Seuring, Stefan | Chair of Supply Chain Management, University of Kassel, Germany | Marco Garetti Doctoral Workshop Track 1 - Hettiarachchi Biman Darshana
Regular Session : Green production and circularity concepts |
| Sgarbossa, Fabio | Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway;
NTNU, Norway;
Norwegian University of Science and Technology (NTNU), Norway | Autonomous Robots in Delivery Logistics
Regular session : Additive Manufacturing and mass customization
Regular session : Optimization of production and transportation systems |
| Shahrokhi, mahmoud | University of Kurdistan, Iran, Islamic Republic of | Regular session : Frameworks and conceptual modelling for systems and services efficiency Presenter
Regular session : Optimization of supply chain agility and reconfigurability Presenter |
| Shanshiashvili, Besarion | Georgian Technical University, Georgia | System Identification for Manufacturing Control Applications Presenter |
| Sharma, Monica | Malaviya National Institute of Technology, India;
Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur (Rajasthan) INDIA - 302017, India;
Department of Management Studies, Malaviya National Institute of Technology Jaipur (Rajasthan) INDIA - 302017, India | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0.
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| She, Shiyan | Beijing Institute of Technology, People's Republic of China | Digital twins based on systems engineering and semantic modeling Presenter |
| Shen, Bin | Donghua University, China, People's Republic of | Data-driven methods for Supply Chain optimization |
| Shen, Qian | Huazhong University of Science and Technology, Wuhan, China | Regular Session : Simulation and optimization of systems performances |
| Shimmura, Takeshi | Ritsumeikan University, Japan | Gastronomic Service System Design
Gastronomic Service System Design |
| Shin, Jeongha | Pohang University of Science and Technology, Korea, Republic of (South Korea) | System Identification for Manufacturing Control Applications Presenter |
| Shlopak, Mikhail | Møreforsking Molde | Operations Management in Engineer-to-Order Manufacturing |
| Shukla, Mayank | Department of Industrial and Systems Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India | Digital Transformations Towards Supply Chain Resiliency |
| SIADAT, Ali | LCFC, France;
LCFC laboratory, Art et Métier Paristech, France | New trends and challenges in Reconfigurable, Flexible or Agile Production System
Regular session : Improvement of design and operation of manufacturing systems |
| Siegrist, Andreas | ETH Zürich, Switzerland | Blockchain in the Operations and Supply Chain Management |
| Silva, Adriano Maniçoba da | Instituto Federal de Educação, Ciência e Tecnologia de São Paulo - Câmpus Suzano | Regular session : Crossdock and transportation issues |
| Silva, Cristovão | Univ Coimbra, CEMMPRE, Department of Mechanical Engineering | Metaheuristics for production systems
Regular session : Maintenance improvement and lifecycle management |
| Silva, Maria Helena Teixeira da | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare |
| Silva, Messias Borges | UFF - Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare |
| Silva, Nilra do Amaral Mendes | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare Presenter |
| Silva, Pedro Duarte | University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Silva, Thiago Augusto de Oliveira | Institute of Exact and Applied Sciences, Federal University of Ouro Preto | Lean and Six Sigma in Services Healthcare |
| Silvas, Messias Borges | Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare |
| Simeth, Alexej | University of Luxembourg, Luxembourg | Digital Transformation Approaches in Production Management Presenter |
| Simonetto, Marco | Norwegian University of Science and Technology (NTNU), Norway | Regular session : Optimization of production and transportation systems Presenter |
| Singh, Amit Raj | National Institute of Technology, Raipur, India | Regular Session : Improvement models and methods for green and innovative systems |
| Singh, Rakshit Kumar | National Institute of Technology, Raipur, India | Regular Session : Improvement models and methods for green and innovative systems |
| Singh, Yogang | Ghent University, Belgium;
Industrial Systems Engineering (ISyE), Flanders Make, Belgium | Regular session : Improvement of design and operation of manufacturing systems |
| Sips, Joren | Flanders Make, Belgium | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Sitzabee, William E. | The Pennsylvania State University, United States of America | Engineering of Smart-Product-Service-Systems of the Future |
| Sivanesan, Narendiran | WZL of RWTH Aachen University, Germany | Regular session : Optimization of production and transportation systems |
| Skjelstad, Lars | SINTEF DIGITAL, Norway | Regular session : Additive Manufacturing and mass customization |
| Skoogh, Anders | Chalmers University of Technology, Sweden | Regular Session : Classification and data management methods
Regular session : Maintenance improvement and lifecycle management
The Future of Lean Thinking and Practice |
| SLAMA, Ilhem | IMT Atlantique, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing Presenter |
| Sleiman, Rita | Univ. Lille, ENSAIT, GEMTEX, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing Presenter |
| Smaglichenko, Alexander | V.A. Trapeznikov Institute of Control Sciences, Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications |
| Smaglichenko, Tatyana | Research Oil and Gas Institute, Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications Presenter |
| Smeds, Riitta | Aalto University, Finland | Serious Games Analytics: Improving Games and Learning Support |
| Smirnova, Gulnara | Kazan National Research Technical University named after A.N.Tupolev | System Identification for Manufacturing Control Applications |
| Smith, Milton | Texas Tech University, United States | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Sobhani, Zahra | University of Kurdistan, Iran, Islamic Republic of | Regular session : Optimization of supply chain agility and reconfigurability |
| Sobral, Ana Paula Barbosa | Universidade Federal Fluminense, Rio de Janeiro, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare Presenter |
| Sobrinho, Alberto | Universidade Federal do Pará, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Sofianidis, Georgios | University of Piraeus, Greece | Digital twins based on systems engineering and semantic modeling |
| Softic, Selver | CAMPUS 02 University of Applied Sciences, Graz, Austria;
CAMPUS02, Austria | Digital Transformation Approaches in Production Management
Digital Transformation Approaches in Production Management |
| Sohr, Annelie | Siemens AG, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Sokolov, Boris | Saint Petersburg Institute for Informatics and Automation of the Russian Academy of Sciences | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty
Regular Session : Advanced modelling approaches |
| Soldatos, John | INTRASOFT International, Greece | Digital twins based on systems engineering and semantic modeling |
| Soldatos, John K. | INTRASOFT International, Luxembourg | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Sonen Tveit, Stine | SINTEF DIGITAL, Norway | Regular session : Additive Manufacturing and mass customization |
| Song, Jungmin | DEXTA Inc., Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Song, Xiaoxiao | Ecole Centrale de Nantes, France | Regular session : Optimization of production and transportation systems Presenter |
| Song, Yangyun | Glorious Sun School of Business and Management, Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| SOUISSI, Omar | National institute of posts and telecommunications, Rabat, Morroco | Regular session : Maintenance improvement and lifecycle management |
| Sousa, Rui M. | Centro ALGORITMI, University of Minho, Portugal | The Future of Lean Thinking and Practice |
| Sølvsberg, Endre | Norwegian University of Science and Technology, Norway | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Sørumsbrenden, Johanne | SINTEF Manufacturing, Norway | Digital Transformation Approaches in Production Management
Regular Session : Green production and circularity concepts |
| Sparr, Kelvin | FH Vorarlberg, Austria | Regular session : Optimization of supply chain agility and reconfigurability Presenter |
| Spengler, Thomas S. | Technische Universität Braunschweig, Institute of Automotive Management and Industrial Production, Chair of Production and Logistics, Germany | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Stachowiak, Agnieszka | Poznan University of Technology, Poland | Regular session : Frameworks and conceptual modelling for systems and services efficiency Presenter |
| Stefan, Ioana A. | ATS, Romania | Serious Games Analytics: Improving Games and Learning Support |
| Stefana, Elena | University of Brescia, Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Steger-Jensen, Kenn | Aalborg University, Denmark;
University of South-Eastern Norway, Norway | Smart Methods and Techniques for Sustainable Supply Chain Management |
| Stein, Hannah | Saarland University, Germany;
German Research Center for Artificial Intelligence, Germany | Engineering of Smart-Product-Service-Systems of the Future Presenter |
| Steine, Anna | Oceaneering, Norway | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Stepanova, Natalia | Institution of Control Sciences of Russian Academy of Sciences, Moscow, Russia | System Identification for Manufacturing Control Applications |
| Sterle, Claudio | University of Naples "Federico II", Italy | Autonomous Robots in Delivery Logistics Presenter |
| Stich, Volker | Institute for Industrial Management (FIR) at RWTH Aachen University, Germany | Engineering of Smart-Product-Service-Systems of the Future |
| Stich, Volker | FIR an der RWTH Aachen, Germany | Regular Session : Simulation and optimization of systems performances |
| Stoll, Oliver | Lucerne University of Applied Sciences and Arts, Switzerland | Engineering of Smart-Product-Service-Systems of the Future
Marco Garetti Doctoral Workshop Track 1 - Stoll Oliver |
| Strandhagen, Jan Ola | Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway | Autonomous Robots in Delivery Logistics |
| Strazzullo, Monica | University of Naples "Federico II", Italy | Autonomous Robots in Delivery Logistics |
| Subramaniyan, Mukund | Department of Industrial and Materials Science, Chalmers University of Technology, Gothenburg 41296, Sweden | The Future of Lean Thinking and Practice |
| Suer, Gursel | Ohio University, USA | Regular Session : Robotics and Human aspects |
| Suleykin, Alexandre | V.A.Trapeznikov Institute of Control Sciences of Russian Academy of Sciences, Russian Federation | System Identification for Manufacturing Control Applications |
| Syberfeldt, Anna | University of Skövde, Sweden | Smart and sustainable production and supply chains |
| Syberg, Marius | Technische Universität Dortmund, Germany | The Future of Lean Thinking and Practice |
| Szejka, Anderson Luis | Industrial and Systems Engineering Graduate Program, Pontifical Catholic University of Parana, Curitiba, Brazil;
PUCPR - Pontifical Catholic University of Paraná, Brazil | Learning and Robust Decision Support Systems for Agile Manufacturing environments
Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Tabourot, Laurent | Laboratoire Systèmes et Matèriaux pour la Mécatronique (SYMME), Université Savoie Mont Blanc | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Taghipour, Fatemeh | University of Tehran, Iran, Islamic Republic of | Lean and Six Sigma in Services Healthcare |
| Taisch, Marco | Politecnico di Milano, Italy | Regular Session : Green production and circularity concepts |
| Tamym, Lahcen | Moulay Ismail University, IA Laboratory, Meknes, Morocco | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing Presenter |
| Tanaka, Wilson Yoshio | Instituto Federal de Educação, Ciência e Tecnologia de São Paulo - Câmpus Suzano | Regular session : Crossdock and transportation issues |
| Tancredi, Giovanni Paolo Carlo | University of Parma, Italy | Production Management in Food Supply Chains |
| Tang, Hao | School of Economics & Management, Tongji University, Shanghai, Peoples' Republic of China | Supply Chain Risk Management under Coronavirus Presenter |
| Tanimizu, Yoshitaka | Waseda University, Japan | Smart Supply Chain and Production in Society 5.0 Era Presenter |
| Tanizaki, Takashi | Kindai University, Japan | Gastronomic Service System Design Presenter |
| Tatsiopoulos, Ilias P. | National Technical University of Athens, Greece | Blockchain in the Operations and Supply Chain Management |
| Tavakkoli-Moghaddam, Reza | University of Tehran, Iran, Islamic Republic of;
School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran | Autonomous Robots in Delivery Logistics Presenter
Hybrid Approaches for Production Planning and Scheduling
Lean and Six Sigma in Services Healthcare Presenter
New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Tchernev, Nikolay | Clermont Ferrand University, France | Modern scheduling and applications in industry 4.0 |
| Tebaldi, Letizia | Department of Engineering and Architecture, University of Parma, Italy | Digital twins in companies first developments and future challenges |
| Teixeira, Adriana Melo | Ministry of Health, DAHU-SAES-MS | Lean and Six Sigma in Services Healthcare |
| Teixeira, Catarina | ALGORITMI Research Centre, University of Minho, Guimarães, Portugal | Regular Session : Classification and data management methods |
| Teixeira, Humberto | ALGORITMI Research Centre, University of Minho, Guimarães, Portugal | Regular Session : Classification and data management methods Presenter |
| TEIXEIRA MACHADO, SIVANILZA | Instituto Federal de São Paulo, Brazil | Production Management in Food Supply Chains |
| Terzi, Sergio | Politecnico di Milano, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Thalmann, Tobias | ETH Zurich, Switzerland | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Theodoropoulos, Spyros | University of Piraeus, Greece;
National Technical University of Athens, Greece | Digital twins based on systems engineering and semantic modeling |
| Thevenin, Simon | IMT Atlantique, LS2N-CNRS, La Chantrerie, 4 Rue Alfred Kastler, 44307 Nantes, France;
IMT Atlantique, France | Learning and Robust Decision Support Systems for Agile Manufacturing environments
Sustainability in Production Planning and Lot-Sizing |
| Thoben, K.-D. | University of Bremen, Faculty of Production Engineering, BIK-Institute for Integrated Product Development, 28359 Bremen, Germany | Regular Session : Advanced modelling approaches |
| Thoben, Klaus-Dieter | BIBA - Bremer Institut für Produktion und Logistik;
University of Bremen | Data-based services as key enablers for Smart Products, Manufacturing and Assembly
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Thomas, Philippe | CRAN, France | Regular Session : Classification and data management methods |
| Thomassey, Sébastien | Univ. Lille, ENSAIT, GEMTEX, France;
GEMTEX / ENSAIT, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing
Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing Presenter |
| Tien, Kai-Wen | The Pennsylvania State University, United States of America | Engineering of Smart-Product-Service-Systems of the Future Presenter
Gastronomic Service System Design |
| Tisi, Massimo | IMT Atlantique, LS2N (UMR CNRS 6004), France | Low-Code and Model-Driven Engineering for Production System Presenter |
| Tiwari, Manoj Kumar | Indian Institute of Technology, Kharagpur, 721302, India;
National Institute of Industrial Engineering (NITIE), Mumbai, 400087, India;
Department of Industrial and Systems Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India | Digital Transformations Towards Supply Chain Resiliency
Digital Transformations Towards Supply Chain Resiliency
Digital Transformations Towards Supply Chain Resiliency
Digital Transformations Towards Supply Chain Resiliency |
| Torres, Luis Fernando | Campinas State University SP, BR;
Universidade Federal Fluminense, Brazil | Lean and Six Sigma in Services Healthcare
Lean and Six Sigma in Services Healthcare |
| Torres Penagos, Alvaro José | Universidad del Valle, Colombia | Regular Session : Risk and performance management of supply chains Presenter |
| Torres-Bonilla, Johanna | NTNU, Norway | Marco Garetti Doctoral Workshop Track 1 - Torres-Bonilla Johanna |
| Torvatn, Hans | SINTEF Digital, Norway | Digital Transformation Approaches in Production Management |
| Traini, Emiliano | Politecnico di Torino, Italy | Regular Session : Simulation and optimization of systems performances Presenter |
| Tran, Hien | Institute of Artificial Intelligence and Data Science, Dong A University, Da Nang, Vietnam | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing Presenter |
| Tran, Kim-Phuc | Univ. Lille, ENSAIT, GEMTEX, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Tran, Minh Tam | emlyon business school, 23 avenue Guy de Collongue, Ecully, Lyon 69134, France;
Univ. Lyon, INSA Lyon, DISP, 69621 Villeurbanne, France | Finance-Driven Supply Chain Presenter |
| Turanoglu Bekar, Ebru | Chalmers University of Technology, Sweden | Regular Session : Classification and data management methods |
| Turino, Maria Antonietta | University of Campania Luigi Vanvitelli, Italy | Digital Transformations Towards Supply Chain Resiliency Presenter |
| Tzavara, Eleni | LMS-University of Patras, Greece | Learning and Robust Decision Support Systems for Agile Manufacturing environments Presenter |
| Uemura Reche, Alda Yoshi | PUCPR - Pontifical Catholic University of Paraná, Brazil | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Unger, Hendrik | Technische Universität Chemnitz, Germany | Regular Session : Supply chain and routing management Presenter |
| Urban, Dennis | Lindt & Sprüngli Germany GmbH | Regular Session : Simulation and optimization of systems performances |
| Urnau, Joanine Facioli | PUCPR - Pontifical Catholic University of Paraná, Brazil;
Boticário Indústria de Cosméticos – Boticário Group | Regular session : Frameworks and conceptual modelling for systems and services efficiency |
| Uzunosmanoglu, Mehmet | Ghent University, Belgium | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Vahedi Nouri, Behdin | School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran | New trends and challenges in Reconfigurable, Flexible or Agile Production System Presenter |
| Vaillancourt, Raynald | Université du Québec à Trois-Rivières, Canada (QC);
Hydro-Québec, Canada (QC) | Regular session : Maintenance improvement and lifecycle management |
| Valdiviezo Viera, Luis Enrique | Federal Fluminense University, Brazil | Lean and Six Sigma in Services Healthcare Presenter |
| Valkokari, Katri | VTT Technical Research Centre of Finland, Tampere | Regular Session : Green production and circularity concepts |
| Vallespir, Bruno | Ims Lab, University of Bordeaux, France | Lean and Six Sigma in Services Healthcare
The Future of Lean Thinking and Practice |
| Van Alboom, Axl | Ghent University, Belgium;
Industrial Systems Engineering (ISyE), Flanders Make, Belgium | Regular session : Improvement of design and operation of manufacturing systems |
| Van De Ginste, Lauren | Ghent University, Belgium;
Industrial Systems Engineering (ISyE), Flanders Make, Belgium | Regular session : Improvement of design and operation of manufacturing systems Presenter |
| Van Noten, Johan | Flanders Make, Belgium | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| VATIKIOTIS, STAVROS | Athens University of Economics and Business, Greece | Metaheuristics for production systems Presenter |
| Vejrum Wæhrens, Brian | Aalborg University, Denmark | Digital Transformations Towards Supply Chain Resiliency |
| Veliou, Entso | University of West Attica, Greece | Digital twins based on systems engineering and semantic modeling |
| Veloudis, George | LMS-University of Patras, Greece | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Verhulst, Elli | Norwegian University of Science and Technology (NTNU), Department of Industrial Economics and Technology Management | Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Vernieri, Mariangela | Balance Systems, Italy | Engineering of Smart-Product-Service-Systems of the Future |
| Vernuccio, Federico | Quantra S.r.l., Italy | Data-based services as key enablers for Smart Products, Manufacturing and Assembly |
| Vespoli, Silvestro | Università degli Studi di Napoli Federico II, Italy | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter
Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. |
| Vican, Victor | Jacobs University gGmbH | Intelligent Systems for Manufacturing Planning and Control in the Industry 4.0. Presenter |
| Vidal Hoguín, Carlos Julio | Universidad del Valle, Colombia | Regular Session : Risk and performance management of supply chains |
| Vieira, Luiza Werner Heringer | Federal Fluminense University - UFF, Brazil | Lean and Six Sigma in Services Healthcare |
| Viera, Luis Enrique Valdiviezo | Fluminense Federal University | Lean and Six Sigma in Services Healthcare |
| Vignali, Giuseppe | Department of Engineering and Architecture, University of Parma, Italy | Digital twins in companies first developments and future challenges Presenter
Production Management in Food Supply Chains Presenter |
| Vildåsen, Sigurd Sagen | SINTEF Manufacturing, Norway;
Norwegian University of Science and Technology (NTNU) | Regular Session : Green production and circularity concepts |
| Villa, Agostino | Former Faculty Professor, Politecnico di Torino, Italy | Regular Session : Supply chain and routing management |
| Visnjic, Ivanka | Department of Operations, Innovation and Data Sciences, ESADE Business School, Ramon Llull University, Av. Pedralbes, 60-62, 08034 Barcelona, Spain | Engineering of Smart-Product-Service-Systems of the Future |
| Viviani, Jean-Laurent | IGR-IAE of Rennes, University of Rennes 1;
CREM UMR CNRS 6211;
Universite de Rennes 1-IGR-IAE | Finance-Driven Supply Chain
Finance-Driven Supply Chain |
| Vo, Thi le Hoa | Université de Rennes 1, CNRS, CREM UMR6211, France | Finance-Driven Supply Chain |
| Vogiatzis, Chrysafis | University of Illinois, Urbana-Champaign, United States of America | Regular Session : Advanced modelling approaches |
| Voisin, Alexandre | Université de Lorraine, CNRS, CRAN, France | Product and Asset Life Cycle Management for Smart and Sustainable Manufacturing Systems |
| Wagenhaus, Gerd | Otto-von-Guericke-University, Germany | Regular session : Improvement of design and operation of manufacturing systems
Regular Session : Simulation and optimization of systems performances |
| Walid, Khellaf | IRIT, IMT Mines Albi-Carmaux | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Wang, Congke | Hebei University, China, People's Republic of | Smart and sustainable production and supply chains Presenter |
| Wang, Guoxin | Beijing Institute of Technology, China, People's Republic of;
Beijing Institute of Technology, Beijing 100081, China | Digital twins based on systems engineering and semantic modeling
Digital twins based on systems engineering and semantic modeling
Digital twins based on systems engineering and semantic modeling |
| Wang, Jiawei | Huazhong University of Science and Technology, China, People's Republic of | Blockchain in the Operations and Supply Chain Management |
| Wang, Lei | Logistics and Optimization of Industrial Systems, University of Technology of Troyes, Troyes, France | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Wang, Ru | Beijing Institute of Technology, China, People's Republic of | Digital twins based on systems engineering and semantic modeling |
| Wang, Wenjie | Glorious Sun School of Business and Management, Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| Wang, Yan | ZPMC | Regular session : Crossdock and transportation issues |
| Wang, Yin | School of Management, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China.;
The State Key Lab for Manufacturing Systems Engineering, Xi’an, Shaanxi 710049, China. | Modern scheduling and applications in industry 4.0 Presenter |
| Wang, Zhaojie | Donghua University, China | Modern scheduling and applications in industry 4.0 |
| Wang, Zhixin | Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 |
| Waschull, Sabine | University of Groningen, Netherlands | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Watanabe, Ruriko | Kobe Universtiy, Japan | Gastronomic Service System Design Presenter |
| Weckenborg, Christian | Technische Universität Braunschweig, Institute of Automotive Management and Industrial Production, Chair of Production and Logistics, Germany | New trends and challenges in Reconfigurable, Flexible or Agile Production System |
| Wehrstedt, Jan Christoph | Siemens AG, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Wellsandt, Stefan | BIBA - Bremer Institut für Produktion und Logistik GmbH | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 Presenter |
| Wenting, Zou | Aalto University Otakaari 1B, FI-00076 AALTO, Finland | Engineering of Smart-Product-Service-Systems of the Future |
| West, Shaun | Lucerne University of Applied Sciences and Arts, Switzerland;
School of Technology and Architecture, Lucerne University of Applied Sciences and Arts, Horw, Switzerland | Digital Transformation Approaches in Production Management
Engineering of Smart-Product-Service-Systems of the Future Presenter
Engineering of Smart-Product-Service-Systems of the Future Presenter
The New Digital Lean Manufacturing Paradigm |
| Weyrich, Michael | Institute of Automation and Software Engineering, University of Stuttgart, Germany | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Wieczorek, Lukasz | Lodz University of Technology, Poland | Modern Analytics and New AI-based Smart Techniques for Replenishment and Production Planning under Uncertainty Presenter |
| Wiesner, Stefan Alexander | BIBA - Bremer Institut für Produktion und Logistik | Data-based services as key enablers for Smart Products, Manufacturing and Assembly
Data-based services as key enablers for Smart Products, Manufacturing and Assembly Presenter |
| Wiktorsson, Magnus | Department of Sustainable Production Development, KTH Royal Institute of Technology, Södertälje, Sweden;
KTH Royal Institute of Technology, 15136 Södertälje , Sweden | Data-driven methods for Supply Chain optimization
Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability
Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability
Digital Transformations Towards Supply Chain Resiliency |
| Willats, Peter | University of Buckingham, United Kingdom | The Future of Lean Thinking and Practice |
| Windmueller, Sebastian | University of Innsbruck, Austria | Learning and Robust Decision Support Systems for Agile Manufacturing environments |
| Wortmann, Andreas | University of Stuttgart, Germany | Low-Code and Model-Driven Engineering for Production System |
| Wortmann, J.C. | University of Groningen, Netherlands | Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 |
| Wuest, Thorsten | West Virginia University, United States of America | Digital Transformation of SME Manufacturers: The Crucial Role of Standard
Digital Transformation of SME Manufacturers: The Crucial Role of Standard |
| Wuttke, Claas-Christian | Karlsruhe University of Applied Science, Germany | The Future of Lean Thinking and Practice |
| Xie, Lei | Glorious Sun School of Business and Management, Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0 Presenter |
| Xu, Xianhao | School of Management, Huazhong University of Science and Technology, Wuhan, China | Smart and sustainable production and supply chains |
| Xu, Yinfeng | Donghua University, China, People's Republic of | Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0 |
| Xu, Yinfeng | School of Management, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China.;
The State Key Lab for Manufacturing Systems Engineering, Xi’an, Shaanxi 710049, China. | Modern scheduling and applications in industry 4.0 |
| Xue, Guisen | College of Business Administration, Kent State University, United States of America | Regular Session : Supply chain and routing management Presenter |
| Yabuuchi, Masayuki | Graduate School of System Informatics, Kobe University | Smart Supply Chain and Production in Society 5.0 Era |
| Yadav, Ravindra Kumar | National Institute of Technology, Raipur, India | Regular Session : Improvement models and methods for green and innovative systems |
| YAĞBASAN, Nur Sena | Gaziantep University, Turkey | Regular session : New approaches for routing problem solving |
| Yalaoui, Alice | University of Technology of Troyes, France;
Computer Laboratory and Digital Society (LIST3N), France | Hybrid Approaches for Production Planning and Scheduling
Meta-Heuristics and Optimization Techniques for Energy-Oriented Manufacturing Systems |
| Yalaoui, Farouk | University of Technology of Troyes, France | Hybrid Approaches for Production Planning and Scheduling |
| Yanagita, Kenji | TMES Corporation | Gastronomic Service System Design |
| Yang, Bo | Hongyang Sealing Product Company, P.R. China | System Identification for Manufacturing Control Applications |
| Yang, Guoqing | Hebei University, China, People's Republic of | Smart and sustainable production and supply chains |
| Yang, Hyungjoon | KAIST, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Yang, Jinho | Sungkyunkwan University, Korea, Republic of (South Korea) | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Yang, Kuan | School of Business Administration, Hunan University, Changsha, Hunan, 410082, China | Smart and sustainable production and supply chains |
| Yang, Wenyu | School of Mechanical Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, China | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Yazdani, MohammadAmin | LGIPM, University of Lorraine, Metz, France | Regular Session : Supply chain and routing management |
| Yeung, Thomas G. | IMT Atlantique;
LS2N UMR CNRS 6004 | Finance-Driven Supply Chain
Regular Session : Green production and circularity concepts Presenter |
| YILDIRIM, Alp | Cranfield University School of Management (United Kingdom) | Marco Garetti Doctoral Workshop Track 2 - Yildirim Alp |
| Yin, Honghao | Hongyang Sealing Product Company, P.R. China | System Identification for Manufacturing Control Applications |
| Yokozawa, Kodo | Yokohama National University, Japan | The Future of Lean Thinking and Practice |
| You, Yuqiu | Ohio University, USA | Regular Session : Robotics and Human aspects Presenter |
| Yuan, Xue-Ming | A*STAR - Agency for Science, Technology and Research | Data-driven methods for Supply Chain optimization |
| YUAN, ZHE | Leonard de Vinci Pôle Universitaire, Research Center, France | Regular Session : Improvement models and methods for green and innovative systems Presenter |
| Yusuf, Yahaya | University of Central Lancashire, United Kingdom | Regular Session : Risk and performance management of supply chains |
| Zaikin, Oleg | Warsaw School of Computer Science | System Identification for Manufacturing Control Applications |
| Zajec, Patrik | Jožef Stefan International Postgraduate School, Slovenia;
Jožef Stefan Institute, Slovenia | Digital twins based on systems engineering and semantic modeling
Human-centered Artificial Intelligence in Smart Manufacturing for the Operator 4.0 Presenter |
| Zalyaev, Eduard | Innopolis University, Russian Federation | Robotics Technologies for Control, Smart Manufacturing and Logistics |
| Zambiasi, Saulo | University of Southern Santa Catarina, Brazil | Data-Driven Platforms and Applications in Production and Logistics: Digital Twins and AI for Sustainability |
| Zammori, Francesco | University of Parma, Italy | Serious Games Analytics: Improving Games and Learning Support |
| Zanchi, Matteo | Università degli Studi di Bergamo, Italy | The Future of Lean Thinking and Practice Presenter |
| Zangiacomi, Andrea | CNR-STIIMA, Italy | Smart Supply Chain and Production in Society 5.0 Era |
| ZEKHNINI, Kamar | L2M3S, ENSAM, Moulay Ismail University, Meknes, Morocco;
ENSAM Meknes, Morocco | Smart and sustainable production and supply chains
Smart Methods and Techniques for Sustainable Supply Chain Management |
| Zeng1, Xianyi | GEMTEX / ENSAIT, France | Artificial Intelligence Based Optimization Techniques for Demand-Driven Manufacturing |
| Zhang, Guoqing | Supply Chain and Logistics Optimization Research Central, Department of Mechanical, Automotive & Materials Engineering, University of Windsor, Windsor, Ontario, N9B 3P4, Canada | Smart and sustainable production and supply chains |
| Zhang, Mingxin | Shanxi Aerospace Tsinghua Equipment Co., Ltd., P. R. China | System Identification for Manufacturing Control Applications |
| ZHANG, Tian | LCFC laboratory, Art et Métier Paristech, France | Regular session : Improvement of design and operation of manufacturing systems Presenter |
| Zhang, Zhengmin | Huazhong University of Science and Technology, Wuhan, China | Regular session : Optimization of production and transportation systems
Regular Session : Simulation and optimization of systems performances Presenter |
| Zhao, Na | Shanxi Aerospace Tsinghua Equipment Co., Ltd., P. R. China | System Identification for Manufacturing Control Applications |
| ZHAO, Wanda | Laboratoire des Sciences du Numérique de Nantes(LS2N), UMR CNRS 6004, Nantes, France | Robotics Technologies for Control, Smart Manufacturing and Logistics Presenter |
| Zhao, Yecheng | School of Economics & Management, Tongji University, Shanghai, Peoples' Republic of China | Modern scheduling and applications in industry 4.0 Presenter |
| Zheng, Feifeng | Donghua University, China;
Glorious Sun School of Business & Management, Donghua University, Shanghai, China | Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Modern scheduling and applications in industry 4.0
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus
Supply Chain Risk Management under Coronavirus |
| Zheng, Xiaochen | EPFL SCI-STI-DK, Station 9, CH-1015 Lausanne, Switzerland | Digital twins based on systems engineering and semantic modeling |
| Zhu, Jing | School of Management, Zhejiang University, P.R.China | Regular session : Crossdock and transportation issues Presenter |
| Zhukovskaya, Alexandra | Tomsk State Pedagogical University, Tomsk, Russia | System Identification for Manufacturing Control Applications |
| ZIDI, Slim | Université de Paris 8, France;
Université de Picardie Jules Verne, France | Regular session : Optimization of supply chain agility and reconfigurability Presenter |
| Zipfel, Benedikt | Technische Universität Dresden, Germany | Data-based services as key enablers for Smart Products, Manufacturing and Assembly Presenter |
| ZOIS, GEORGIOS | Athens University of Economics and Business, Greece | Metaheuristics for production systems |
| Zouggar, Anne | Ims Lab, University of Bordeaux, France | Lean and Six Sigma in Services Healthcare
The Future of Lean Thinking and Practice Presenter |
| Zülch, Gert | Karlsruhe Institute of Technology, Germany | Regular Session : Robotics and Human aspects Presenter |
| Züst, Simon | School of Technology and Architecture, Lucerne University of Applied Sciences and Arts, Horw, Switzerland | The New Digital Lean Manufacturing Paradigm |
| Zvaritch, Valerij | Institute of Electrodynamic of the National Academy of Science of Ukraine, Ukraine | System Identification for Manufacturing Control Applications |
| Żylawski, Andrzey | Warsaw School of Computer Science | System Identification for Manufacturing Control Applications |
